PACELEADER B220LB Lo vf surface mount schottky barrier rectifier Datasheet

B220LB thru B240LB
LO VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE - 20 TO 40 VOLTS
CURRENT - 2.0 AMPERES
SMB/DO-214AA
.075(1.91)
.083(2.11)
.130(3.30)
.155(3.94)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.083(2.13)
.096(2.44)
.002(.051)
.008(.203)
.030(0.76)
.050(1.27)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
FEATURES
MECHANICAL DATA
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
For surface mount applications
Low profile package
Built-in strain relief
Metal to silicon rectifier, majority carrier conduction
Low power loss, high efficiency
Easy pick and place
High curren capability, low VF
High surge capacity
For use in low voltage gigh frequency inverters,
Free wheeling, and protection applications
High temperature soldering guaranteed
High temperature soldering
260oC/10 seconds at terminsls
Pb free product at available 99% Sn above meet RoHs
Environment substance directive request
Case JEDEC DO-214AA molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Sethod 2026
Polarity Color band denotes cathode
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.003 ounce, 0.093gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified
Resistive or inductive load
SYMBOL
B220LB
B230LB
B240LB
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
20
30
40
Volts
Maximum RMS Voltage
VRMS
14
21
28
Volts
Maximum DC Blocking Voltage
VDC
20
30
40
Volts
Maximum Average Forward Rectified Current at TL
(see Figure 1)
I(AV)
2.0
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
50
Amps
Maximum Instantaneous Forward Voltage at 2.0A (Note 1)
VF
0.38
0
Maximum DC Reverse Current (NOTE 1) TA=25 C (Note 1)
at Rated DC Blocking Voltage TA=1000C
Maximum Thermal Resistance (NOTE 2)
Operating Junction Capacitance Range
Storage Temperature Range
17
75
JL
JA
mA
0
C/W
TJ
-50 to +150
0
TSTG
-50 to +150
0
NOTES
1. Pulse test with pw=300 sec, 1% duty cycle
2. Mounted on P.C.B. Board with 8.0mm2 (0.13mm thick ) copper pad areas
www.paceleader.tw
Volts
0.5
20
IR
R
R
0.4
1
C
C
B220LB thru B240LB
LO VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
RATING AND CHARACTERISTICS CURVES B220LB THRU B240LB
www.paceleader.tw
2
Similar pages