AD AD8290 G = 50, cmos sensor amplifier with current excitation Datasheet

G = 50, CMOS Sensor Amplifier
with Current Excitation
AD8290
FEATURES
GENERAL DESCRIPTION
Supply voltage range: 2.6 V to 5.5 V
Low power
1.2 mA + 2× excitation current
0.5 μA shutdown current
Low input bias current: ±100 pA
High CMRR: 120 dB
Space savings: 16-lead, 3.0 mm × 3.0 mm × 0.55 mm LFCSP
Excitation current
300 μA to 1300 μA range
Set with external resistor
The AD8290 contains both an adjustable current source to
drive a sensor and a difference amplifier to amplify the signal
voltage. The amplifier is set for a fixed gain of 50. The AD8290
is an excellent solution for both the drive and the sensing aspects
required for pressure, temperature, and strain gage bridges.
In addition, because the AD8290 operates with low power,
works with a range of low supply voltages, and is available in a
low profile package, it is suitable for drive/sense circuits in
portable electronics as well.
The AD8290 is available in a lead free 3.0 mm × 3.0 mm ×
0.55 mm package and is operational over the industrial
temperature range of −40°C to +85°C.
APPLICATIONS
Bridge and sensor drives
Portable electronics
FUNCTIONAL BLOCK DIAGRAM
CFILTER
RSET
11
6
ENBL
5
3
2
VCC
13
10
GND
15
CBRIDGE
4
14
AD8290
VREF
NC
NC
NC
NC
NC
1
7
8
9
12
16
ADC
06745-001
NC
ANTIALIASING
FILTER
Figure 1.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2007–2008 Analog Devices, Inc. All rights reserved.
AD8290* Product Page Quick Links
Last Content Update: 11/01/2016
Comparable Parts
Design Resources
View a parametric search of comparable parts
•
•
•
•
Documentation
Data Sheet
• AD8290: G = 50, CMOS Sensor Amplifier with Current
Excitation Data Sheet
Technical Books
• A Designer's Guide to Instrumentation Amplifiers, 3rd
Edition, 2006
AD8290 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
Discussions
View all AD8290 EngineerZone Discussions
Sample and Buy
Reference Materials
Visit the product page to see pricing options
Technical Articles
• Auto-Zero Amplifiers
• High-performance Adder Uses Instrumentation Amplifiers
Technical Support
Submit a technical question or find your regional support
number
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to
the content on this page does not constitute a change to the revision number of the product data sheet. This content may be
frequently modified.
AD8290
TABLE OF CONTENTS
Features .............................................................................................. 1
Current Source............................................................................ 15
Applications....................................................................................... 1
Applications Information .............................................................. 16
General Description ......................................................................... 1
Typical Connections .................................................................. 16
Functional Block Diagram .............................................................. 1
Current Excitation...................................................................... 16
Revision History ............................................................................... 2
Enable/Disable Function ........................................................... 16
Specifications..................................................................................... 3
Output Filtering.......................................................................... 16
Absolute Maximum Ratings............................................................ 5
Clock Feedthrough..................................................................... 16
Thermal Resistance ...................................................................... 5
Maximizing Performance Through Proper Layout ............... 17
ESD Caution.................................................................................. 5
Power Supply Bypassing ............................................................ 17
Pin Configuration and Function Descriptions............................. 6
Dual-Supply Operation ............................................................. 17
Typical Performance Characteristics ............................................. 7
Pressure Sensor Bridge Application......................................... 18
Theory of Operation ...................................................................... 14
Temperature Sensor Application.............................................. 19
Amplifier...................................................................................... 14
ADC/Microcontroller................................................................ 19
High Power Supply Rejection (PSR) and Common-Mode
Rejection (CMR) ........................................................................ 14
Outline Dimensions ....................................................................... 20
Ordering Guide .......................................................................... 20
1/f Noise Correction .................................................................. 14
REVISION HISTORY
2/08—Rev. SpA to Rev. B
Changes to Features Section............................................................ 1
Changes to Amplifier Section and Figure 43 .............................. 14
Changes to Current Source Section ............................................. 15
Changes to Current Excitation Section, Output Filtering
Section, Clock Feedthrough Section, and Figure 45.................. 16
Changes to Figure 46...................................................................... 17
8/07—Revision SpA
7/07—Revision 0: Initial Version
Rev. B | Page 2 of 20
AD8290
SPECIFICATIONS
VCC = 2.6 V to 5.0 V, TA = 25°C, CFILTER = 6.8 nF, output antialiasing capacitor = 68 nF, RSET = 3 kΩ, common-mode input = 0.6 V, unless
otherwise noted.
Table 1.
Parameter
COMMON-MODE REJECTION RATIO (CMRR)
CMRR DC
NOISE
Amplifier and VREF
VOLTAGE OFFSET
Output Offset
Output Offset TC
PSR
INPUT CURRENT
Input Bias Current
Input Offset Current
DYNAMIC RESPONSE
Small Signal Bandwidth –3 dB
GAIN
Gain
Gain Error
Gain Nonlinearity
Gain Drift
INPUT
Differential Input Impedance
Input Voltage Range
OUTPUT
Output Voltage Range
Output Series Resistance
CURRENT EXCITATION
Excitation Current Range
Excitation Current Accuracy
Excitation Current Drift
External Resistor for Setting
Excitation Current (RSET)
Excitation Current Power
Supply Rejection
Excitation Current Pin Voltage
Excitation Current Output Resistance
Required Capacitor from Ground to
Excitation Current Pin (CBRIDGE)
ENABLE
ENBL High Level
Test Conditions
Input voltage (VINP − VINN)
range of 0.2 V to VCC − 1.7 V
Min
Typ
110
120
dB
0.75
μV p-p
Input referred, f = 0.1 Hz to 10 Hz
Reference is internal and set to
900 mV nominal
−40°C < TA < +85°C
900
935
mV
−300
±50
120
+300
μV/°C
dB
−1000
−2000
±100
±200
+1000
+2000
pA
pA
0.25
+25
0.2
VCC − 1.7
MΩ||pF
V
0.075
VCC − 0.075
V
−25
50
±0.5
±0.0075
±15
kHz
V/V
%
%
ppm/°C
−1.0
+1.0
50||1
VOUT = Gain × (VINP − VINN) +
Output Offset
10 ± 20%
Excitation current = 0.9 V/RSET
−40°C < TA < +85°C
300
−1.0
−250
692
−2.0
±50
+0.2
0
kΩ
1300
+1.0
+250
3000
μA
%
ppm/°C
Ω
+2.0
μA/V
VCC − 1.0
V
MΩ
μF
VCC
VCC
0.8
V
V
V
ms
100
0.1
VCC < 2.9 V
VCC > 2.9 V
VCC − 0.5
2.4
GND
ENBL Low Level
Start-Up Time for ENBL
5.0
Rev. B | Page 3 of 20
Unit
865
With external filter capacitors,
CFILTER = 6.8 nF and output
antialiasing capacitor = 68 nF
−40°C < TA < +85°C
Max
AD8290
Parameter
POWER SUPPLY
Operating Range
Quiescent Current
Test Conditions
Min
Typ
Max
Unit
1.2 + 2×
excitation current
0.5
5.5
1.8 + 2×
excitation current
10
V
mA
+85
°C
2.6
Shutdown Current
TEMPERATURE RANGE
For Operational Performance
−40
Rev. B | Page 4 of 20
μA
AD8290
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage 1
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 10 sec)
1
Rating
6V
+VSUPPLY
±VSUPPLY
Indefinite
−65°C to +150°C
−40°C to +85°C
−65°C to +150°C
300°C
Differential input voltage is limited to ±5.0 V, the supply voltage, or
whichever is less.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 3.
Package Type
16-Lead LFCSP (0.55 mm)
ESD CAUTION
Rev. B | Page 5 of 20
θJA
42.5
θJC
7.7
Unit
°C/W
AD8290
9
NC
NC 8
NC 7
11 RSET
10 GND
(Not to Scale)
CF2 5
12 NC
NC = NO CONNECT
06745-002
14 VINN
TOP
VIEW
ENBL 3
VOUT 4
13 IOUT
16 NC
AD8290
CF1 6
NC 1
VCC 2
15 VINP
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Figure 2. Pin Configuration
Table 4. Pin Function Descriptions
Pin No.
1
2
3
4
Mnemonic
NC
VCC
ENBL
VOUT
5
6
7
8
9
10
11
12
13
14
15
16
17/Pad
CF2
CF1
NC
NC
NC
GND
RSET
NC
IOUT
VINN
VINP
NC
NC
1
Description
Tie to Ground 1 or Pin 16.
Positive Power Supply Voltage.
Logic 1 enables the part, and Logic 0 disables the part.
Open End of Internal 10 kΩ Resistor. Tie one end of external antialiasing filter capacitor (6.8 nF) to this pin, and tie
the other end to ground.1
Tie one end of the CFILTER (68 nF) that is in parallel with the internal gain resistor to this pin.
Tie the other end of the CFILTER (68 nF) that is in parallel with the internal gain resistor to this pin.
Tie to Ground.1
Tie to Ground.1
Tie to Ground.1
Ground1 or Negative Power Supply Voltage.
Tie one end of Resistor RSET to this pin to set the excitation current and tie the other end of Resistor RSET to Pin 10.
Tie to Ground.1
Excitation Current Output. Tie one end of CBRIDGE (0.1 μF) to this pin and tie the other end of CBRIDGE to ground.1
Negative Input Terminal.
Positive Input Terminal.
Tie to Ground1 or Pin 1.
Pad should be floating and not tied to any potential.
During dual-supply operation, ground becomes the negative power supply voltage.
Rev. B | Page 6 of 20
AD8290
TYPICAL PERFORMANCE CHARACTERISTICS
25
35
30
20
UNITS (%)
UNITS (%)
25
20
15
15
10
10
5
892
894
896
898
900
902
904
906
908
OUTPUT VOLTAGE (mV)
0
06745-003
0
Figure 3. Output Offset Voltage at 2.6 V Supply
0.2988
0.2991
0.2994
0.3000
0.3006
0.3012
0.2997
0.3003
0.3009
EXCITATION CURRENT (mA)
06745-006
5
Figure 6. Excitation Output Current for 3 kΩ RSET at 2.6 V Supply
35
25
30
20
20
UNITS (%)
UNITS (%)
25
15
15
10
10
5
892
894
896
898
900
902
904
906
908
OUTPUT VOLTAGE (mV)
0
06745-004
0
Figure 4. Output Offset Voltage at 3.6 V Supply
0.2988
0.2991
0.2994
0.3000
0.3006
0.3012
0.2997
0.3003
0.3009
EXCITATION CURRENT (mA)
06745-007
5
Figure 7. Excitation Output Current for 3 kΩ RSET at 3.6 V Supply
35
25
30
20
UNITS (%)
20
15
15
10
10
5
0
892
894
896
898
900
902
904
906
OUTPUT VOLTAGE (mV)
908
0
0.2988
0.2991
0.2994
0.2997
0.3000
0.3003
0.3006
0.3009
0.3012
EXCITATION CURRENT (mA)
Figure 5. Output Offset Voltage at 5.0 V Supply
Figure 8. Excitation Output Current for 3 kΩ RSET at 5.0 V Supply
Rev. B | Page 7 of 20
06745-008
5
06745-005
UNITS (%)
25
25
25
20
20
15
15
UNITS (%)
10
5
1.296 1.297 1.298 1.299 1.300 1.301 1.302 1.303 1.304 1.305
EXCITATION CURRENT (mA)
0
GAIN ERROR (%)
Figure 12. Percent Gain Error at 2.6 V Supply
25
25
20
20
15
15
UNITS (%)
10
10
5
5
EXCITATION CURRENT (mA)
0
06745-010
1.296 1.297 1.298 1.299 1.300 1.301 1.302 1.303 1.304 1.305
GAIN ERROR (%)
Figure 13. Percent Gain Error at 3.6 V Supply
25
25
20
20
15
15
UNITS (%)
UNITS (%)
Figure 10. Output Excitation Current for 692 Ω RSET at 3.6 V Supply
10
5
10
5
1.296 1.297 1.298 1.299 1.300 1.301 1.302 1.303 1.304 1.305
EXCITATION CURRENT (mA)
0
06745-011
0
–0.60 –0.56 –0.52 –0.48 –0.44 –0.40 –0.36 –0.32 –0.28
06745-013
UNITS (%)
Figure 9. Output Excitation Current for 692 Ω RSET at 2.6 V Supply
0
–0.60 –0.56 –0.52 –0.48 –0.44 –0.40 –0.36 –0.32 –0.28
06745-012
5
06745-009
0
10
–0.60 –0.56 –0.52 –0.48 –0.44 –0.40 –0.36 –0.32 –0.28
GAIN ERROR (%)
Figure 11. Output Excitation Current for 692 Ω RSET at 5.0 V Supply
Figure 14. Percent Gain Error at 5.0 V Supply
Rev. B | Page 8 of 20
06745-014
UNITS (%)
AD8290
AD8290
50
40
35
40
25
UNITS (%)
UNITS (%)
30
20
15
30
20
10
10
0.0030
0.0035
0.0040
0.0050
0.0060
0.0070
0.0045
0.0055
0.0065
NONLINEARITY (%)
0
06745-026
0
–35
–15
5
25
45
65
85
105
125
DRIFT (µV/°C)
06745-031
5
Figure 18. Output Offset Voltage Drift from −40°C to +85°C at 2.6 V Supply
Figure 15. Percent Nonlinearity at 2.6 V Supply
50
35
30
40
UNITS (%)
UNITS (%)
25
20
15
30
20
10
10
0.0030
0.0035
0.0040
0.0050
0.0060
0.0070
0.0045
0.0055
0.0065
NONLINEARITY (%)
0
06745-027
0
–35
–15
5
25
45
65
85
105
125
DRIFT (µV/°C)
06745-032
5
Figure 19. Output Offset Voltage Drift from −40°C to +85°C at 3.6 V Supply
Figure 16. Percent Nonlinearity at 3.6 V Supply
50
45
40
40
35
UNITS (%)
25
20
30
20
15
10
10
0
0.0030
0.0045
0.0060
0.0090
0.0075
0.0105
NONLINEARITY (%)
0.0120
0.0135
Figure 17. Percent Nonlinearity at 5.0 V Supply
0.0150
0
–35
–15
5
25
45
65
DRIFT (µV/°C)
85
105
125
06745-033
5
06745-028
UNITS (%)
30
Figure 20. Output Offset Voltage Drift from −40°C to +85°C at 5.0 V Supply
Rev. B | Page 9 of 20
AD8290
45
40
40
35
35
30
25
UNITS (%)
25
20
15
20
35
50
65
80
95
110
125
DRIFT (ppm/°C)
0
06745-035
5
40
40
35
35
40
50
60
70
80
90
30
30
25
UNITS (%)
25
20
15
20
15
10
10
5
5
20
35
50
65
80
95
110
125
DRIFT (ppm/°C)
0
06745-036
5
10
20
30
40
50
60
70
80
90
DRIFT (ppm/°C)
Figure 22. Excitation Current Drift from −40°C to +85°C at
3.6 V Supply, RSET = 3 kΩ
06745-040
UNITS (%)
30
Figure 24. Excitation Current Drift from −40°C to +85°C at
2.6 V Supply, RSET = 692 Ω
45
Figure 25. Excitation Current Drift from −40°C to +85°C at
3.6 V Supply, RSET = 692 Ω
45
40
40
35
35
30
30
UNITS (%)
25
25
20
15
20
15
10
10
5
5
20
35
50
65
80
95
110
125
DRIFT (ppm/°C)
06745-037
5
0
20
DRIFT (ppm/°C)
Figure 21. Excitation Current Drift from −40°C to +85°C at
2.6 V Supply, RSET = 3 kΩ
0
10
06745-039
5
5
UNITS (%)
15
10
10
0
20
0
10
20
30
40
50
60
70
80
90
DRIFT (ppm/°C)
Figure 26. Excitation Current Drift from −40°C to +85°C at
5.0 V Supply, RSET = 692 Ω
Figure 23. Excitation Current Drift from −40°C to +85°C at
5.0 V Supply, RSET = 3 kΩ
Rev. B | Page 10 of 20
06745-041
UNITS (%)
30
AD8290
100
40
35
30
GAIN (V/V)
UNITS (%)
25
20
15
10
10
–16.0 –15.5 –15.0 –14.5 –14.0 –13.5 –13.0 –12.5 –12.0
DRIFT (ppm/°C)
1
06745-045
0
1
10
100
1k
10k
FREQUENCY (Hz)
Figure 27. Gain Drift from −40°C to +85°C at 2.6 V Supply
06745-018
5
Figure 30. Frequency Response for Supply Range of 2.6 V to 5.0 V
(External CFILTER = 6.8 nF, Antialiasing Capacitor = 68 nF)
310
40
308
35
EXCITATION CURRENT (µA)
306
30
20
15
10
5
302
300
298
296
294
–16.0 –15.5 –15.0 –14.5 –14.0 –13.5 –13.0 –12.5 –12.0
DRIFT (ppm/°C)
290
2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50
POWER SUPPLY (V)
Figure 31. Low Excitation Current vs. Power Supply
Figure 28. Gain Drift from −40°C to +85°C at 3.6 V Supply
1.310
40
1.308
EXCITATION CURRENT (mA)
35
30
20
15
10
5
1.306
1.304
1.302
1.300
1.298
1.296
1.294
1.292
–16.0 –15.5 –15.0 –14.5 –14.0 –13.5 –13.0 –12.5 –12.0
DRIFT (ppm/°C)
06745-047
UNITS (%)
25
0
06745-019
292
06745-046
0
304
1.290
2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50
POWER SUPPLY (V)
Figure 32. High Excitation Current vs. Power Supply
Figure 29. Gain Drift from −40°C to +85°C at 5.0 V Supply
Rev. B | Page 11 of 20
06745-020
UNITS (%)
25
AD8290
50.0
310
49.9
300
2.6V SUPPLY
3.6V SUPPLY
2.6V SUPPLY
49.8
5V SUPPLY
49.7
3.6V SUPPLY
290
5.0V SUPPLY
49.6
285
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
PIN VOLTAGE (V)
49.5
–55 –45 –35 –25 –15 –5
06745-021
280
5
15 25 35 45 55 65 75 85 95
TEMPERATURE (°C)
Figure 33. Low Excitation Current vs. Excitation Current Pin Voltage
06745-052
295
GAIN (V/V)
EXCITATION CURRENT (µA)
305
Figure 36. Gain vs. Temperature
1.32
0.305
0.304
EXCITATION CURRENT (mA)
EXCITATION CURRENT (mA)
1.31
1.30
1.29
2.6V SUPPLY
3.6V SUPPLY
1.28
5.0V SUPPLY
1.27
0.303
0.302
5.0V SUPPLY
2.6V SUPPLY
0.301
0.300
3.6V SUPPLY
0.299
0.298
0.297
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
PIN VOLTAGE (V)
0.295
–45 –35 –25 –15 –5
06745-022
1.26
5
15
25
35
45
55
65
75
85
95
TEMPERATURE (°C)
Figure 34. High Excitation Current vs. Excitation Current Pin Voltage
06745-038
0.296
Figure 37. Excitation Current vs. Temperature, RSET = 3 kΩ
1.315
0.905
0.904
1.310
EXCITATION CURRENT (mA)
2.6V SUPPLY
0.902
0.901
3.6V SUPPLY
0.900
0.899
0.898 5.0V SUPPLY
0.897
5.0V SUPPLY
1.305
1.300
2.6V SUPPLY
3.6V SUPPLY
1.295
1.290
0.895
–45 –35 –25 –15 –5
5
15
25
35
45
55
65
75
TEMPERATURE (°C)
85
95
Figure 35. Output Offset Voltage vs. Temperature
1.285
–45 –35 –25 –15 –5
5
15
25
35
45
55
65
75
85
TEMPERATURE (°C)
Figure 38. Excitation Current vs. Temperature, RSET = 692 Ω
Rev. B | Page 12 of 20
95
06745-042
0.896
06745-034
OUTPUT OFFSET (V)
0.903
AD8290
1000
1.5
1.3
1.2
5.0V SUPPLY
3.6V SUPPLY
NOISE (nV Hz)
QUIESCENT CURRENT (mA)
1.4
1.1
1.0
0.9
2.6V SUPPLY
100
10
0.8
5
15
25
35
45
55
65
75
TEMPERATURE (°C)
85
95
1
0.01
06745-043
0.6
–45 –35 –25 –15 –5
0.1
1
10
100
1000
FREQUENCY (Hz)
Figure 39. Quiescent Current vs. Temperature (Excludes 2× Excitation Current)
06745-051
0.7
Figure 41. Input-Referred Noise vs. Frequency
1.0
INPUT-REFERRED NOISE (100nV/DIV)
0.9
0.8
ENBL PIN
VOLTAGE
(0V TO 5V)
OUTPUT OFFSET
VOLTAGE
0.7
VOLTS (V)
0.6
0.5
0.4
0.3
0.2
0.1
Figure 40. 0.01 Hz to 10 Hz Input-Referred Noise
–0.1
–10
–5
0
5
10
15
TIME (ms)
Figure 42. ENBL Pin Voltage for 5.0 V Supply vs.
Output Offset Voltage Start-Up Time
Rev. B | Page 13 of 20
20
06745-050
TIME (10s/DIV)
06745-049
0
AD8290
THEORY OF OPERATION
AMPLIFIER
HIGH POWER SUPPLY REJECTION (PSR) AND
COMMON-MODE REJECTION (CMR)
The amplifier of the AD8290 is a precision current-mode
correction instrumentation amplifier. It is internally set to a
fixed gain of 50. The current-mode correction topology results
in excellent accuracy.
PSR and CMR indicate the amount that the offset voltage of an
amplifier changes when its common-mode input voltage or power
supply voltage changes. The autocorrection architecture of the
AD8290 continuously corrects for offset errors, including those
induced by changes in input or supply voltage, resulting in
exceptional rejection performance. The continuous autocorrection
provides great CMR and PSR performances over the entire
operating temperature range (−40°C to +85°C).
Figure 43 shows a simplified diagram illustrating the basic
operation of the instrumentation amplifier within the AD8290
(without correction). The circuit consists of a voltage-to-current
amplifier (M1 to M6), followed by a current-to-voltage amplifier
(R2 and A1). Application of a differential input voltage forces a
current through R1, resulting in a conversion of the input
voltage to a signal current. Transistors M3 to M6 transfer twice
the signal current to the inverting input of the op amp, A1. A1
and R2 form a current-to-voltage converter to produce a rail-torail output voltage, VOUT.
1/f NOISE CORRECTION
Flicker noise, also known as 1/f noise, is noise inherent in the
physics of semiconductor devices and decreases 10 dB per decade.
The 1/f corner frequency of an amplifier is the frequency at which
the flicker noise is equal to the broadband noise of the amplifier. At
lower frequencies, flicker noise dominates causing large errors
in low frequency or dc applications.
Op Amp A1 is a high precision auto-zero amplifier. This
amplifier preserves the performance of the autocorrecting,
current-mode amplifier topology while offering the user a true
voltage-in, voltage-out instrumentation amplifier. Offset errors
are corrected internally.
Flicker noise appears as a slowly varying offset error that is
reduced by the autocorrection topology of the AD8290, allowing
the AD8290 to have lower noise near dc than standard low
noise instrumentation amplifiers.
An internal 0.9 V reference voltage is applied to the noninverting
input of A1 to set the output offset level. External Capacitor
CFILTER is used to filter out correction noise.
VCC
CFILTER
I
I
M5
M6
R1
I – IR1
VINP
M1
2I
2IR1
R3
I + IR1
(VINP – VINN)
R1
VBIAS
M2
VINN
M3
M4
VOUT = VREF
+
2R2
R1
VINP – VINN
A1
VREF = 0.9V
2I
06745-023
IR1 =
R2
I – IR1
EXTERNAL
Figure 43. Simplified Schematic of the Instrumentation Amplifier Within the AD8290
Rev. B | Page 14 of 20
AD8290
CURRENT SOURCE
The AD8290 generates an excitation current that is
programmable with an external resistor, RSET, as shown in
Figure 44. A1 and M1 are configured to produce 0.9 V across
RSET, which is based on an internal 0.9 V reference and creates a
current equal to 0.9 V/RSET internal to the AD8290. This current
is passed to a precision current mirror and a replica of the current
is sourced from the IOUT pin. This current can be used for the
excitation of a sensor bridge. CBRIDGE is used to filter noise from
the current excitation circuit.
PRECISION CURRENT
MIRROR
A1
M1
VREF = 0.9V
GND
RSET
IOUT
RSET
SENSOR
BRIDGE
Figure 44. Current Excitation
Rev. B | Page 15 of 20
06745-024
CBRIDGE
AD8290
APPLICATIONS INFORMATION
For bandwidths greater than 10 Hz, an additional single-pole
RC filter of 235 Hz is required on the output, which is also
recommended when driving an ADC requiring an antialiasing
filter. Internal to the AD8290 is a series 10 kΩ resistor at the
output (R3 in Figure 43) and using an external 68 nF capacitor
to ground produces an RC filter of 235 Hz on the output as well.
These two filters produce an overall bandwidth of approximately
160 Hz for the output signal.
TYPICAL CONNECTIONS
Figure 45 shows the typical connections for single-supply
operation when used with a sensor bridge.
CURRENT EXCITATION
In Figure 45, RSET is used to set the excitation current sourced at
the IOUT pin. The formula for the excitation current IOUT is
IOUT = (900/RSET) mA
In addition, when driving low impedances, the internal series
10 kΩ resistor creates a voltage divider at the output. If it is
necessary to access the output of the internal amplifier prior
to the 10 kΩ resistor, it is available at the CF2 pin.
where RSET is the resistor between Pin 10 (GND) and Pin 11
(RSET).
The AD8290 is internally set by the factory to provide the
current excitation described by the previous formula (within the
tolerance range listed in Table 1). The range of RSET is 692 Ω to
3 kΩ, resulting in a corresponding IOUT of 1300 μA to 300 μA,
respectively.
For applications with low bandwidths (<10 Hz), only the first
filter capacitor (CFILTER) is required. In this case, the high
frequency noise from the auto-zero amplifier (output amplifier)
is not filtered before the following stage.
ENABLE/DISABLE FUNCTION
CLOCK FEEDTHROUGH
Pin 3 (ENBL) provides the enabling/disabling function of the
AD8290 to conserve power when the device is not needed. A
Logic 1 turns the part on and allows it to operate normally. A
Logic 0 disables the output and excitation current and reduces
the quiescent current to less than 10 μA.
The AD8290 uses two synchronized clocks to perform
autocorrection. The input voltage-to-current amplifiers
are corrected at 60 kHz.
Trace amounts of these clock frequencies can be observed at
the output. The amount of feedthrough is dependent upon the
gain because the autocorrection noise has an input- and outputreferred term. The correction feedthrough is also dependent
upon the values of the external capacitors, C2 and CFILTER.
The turn-on time upon switching Pin 3 high is dominated
by the output filters. When the device is disabled, the output
becomes high impedance, enabling the muxing application of
multiple AD8290 instrumentation amplifiers.
OUTPUT FILTERING
Filter Capacitor CFILTER is required to limit the amount of
switching noise present at the output. The recommended
bandwidth of the filter created by CFILTER and an internal
100 kΩ is 235 Hz. Select CFILTER based on
CFILTER = 1/(235 × 2 × π × 100 kΩ) = 6.8 nF
CFILTER
6.8nF
5.0V
RSET
692Ω TO 3kΩ
6
5
CF1
CF2
11
RSET
3
ENBL
VCC 2
C1
0.1µF
13 IOUT
14
AD8290
VINN
GND 10
VOUT 4
15 VINP
VOUT
CBRIDGE
NC
NC
NC
NC
NC
NC
1
7
8
9
12
16
NC = NO CONNECT
NOTES
LAYOUT CONSIDERATIONS:
1. KEEP C1 CLOSE TO PIN 2 AND PIN 10.
2. KEEP RSET CLOSE TO PIN 11.
Figure 45. Typical Single-Supply Connections
Rev. B | Page 16 of 20
06745-025
C2
68nF
AD8290
DUAL-SUPPLY OPERATION
MAXIMIZING PERFORMANCE THROUGH PROPER
LAYOUT
The AD8290 can be configured to operate in dual-supply mode.
An example of such a circuit is shown in Figure 46, where the
AD8290 is powered by ±1.8 V supplies. When operating with
dual supplies, pins that are normally referenced to ground in the
single-supply mode, now need to be referenced to the negative
supply. These pins include the following: Pin 1, Pin 7, Pin 8, Pin 9,
Pin 10, Pin 12, and Pin 16. External components, such as RSET, the
sensing bridge, and the antialiasing filter capacitor at the output,
should also be referenced to the negative supply. Additionally,
two bypass capacitors should be added beyond what is necessary
for single-supply operation: one between the negative supply
and ground, and the other between the positive and negative
supplies.
To achieve the maximum performance of the AD8290, care
should be taken in the circuit board layout. The PCB surface
must remain clean and free of moisture to avoid leakage currents
between adjacent traces. Surface coating of the circuit board
reduces surface moisture and provides a humidity barrier,
reducing parasitic resistance on the board.
RSET should be placed close to RSET (Pin 11) and GND (Pin 10).
The paddle on the bottom of the package should not be connected
to any potential and should be floating.
For high impedance sources, the PCB traces from the AD8290
inputs should be kept to a minimum to reduce input bias
current errors.
When operating in dual-supply mode, the specifications change
and become relative to the negative supply. The input voltage
range minimum shifts from 0.2 V to 0.2 V above the negative
supply (in this example: −1.6 V), the output voltage range shifts
from a minimum of 0.075 V to 0.075 V above the negative supply
(in this example: −1.725 V), and the excitation current pin
voltage minimum shifts from 0 V to −1.8 V in this example.
The maximum specifications of these three parameters are
specified relative to VCC in Table 1 and do not change.
POWER SUPPLY BYPASSING
The AD8290 uses internally generated clock signals to perform
autocorrection. As a result, proper bypassing is necessary to
achieve optimum performance. Inadequate or improper bypassing
of the supply lines can lead to excessive noise and offset voltage.
A 0.1 μF surface-mount capacitor should be connected between
Pin 2 (VCC) and Pin 10 (GND) when operating with a single
supply and should be located as close as possible to those two pins.
For other specifications, both the minimum and maximum
specifications change. The output offset shifts from a minimum
of +865 mV and maximum of +935 mV to a minimum of
−935 mV and a maximum of −865 mV in the example. In
addition, the logic levels for the ENBL operation should be
adjusted accordingly.
CFILTER
6.8nF
1.8V
11
RSET
C3
0.1µF
6
5
3
CF1
CF2
ENBL
–1.8V
VCC 2
13
IOUT
C1
0.1µF
–1.8V
GND 10
14
VINN
15
VINP
AD8290
C5
0.1µF
VOUT 4
CBRIDGE
NC
NC
NC
NC
NC
NC
1
7
8
9
12
16
–1.8V
NC = NO CONNECT
NOTES
LAYOUT CONSIDERATIONS:
1. KEEP C1 CLOSE TO PIN 2 AND PIN 10.
2. KEEP C3 CLOSE TO PIN 2.
3. KEEP C5 CLOSE TO PIN 10.
4. KEEP RSET CLOSE TO PIN 11.
VOUT
C2
68nF
–1.8V
Figure 46. Typical Dual-Supply Connections
Rev. B | Page 17 of 20
06745-029
RSET
692Ω TO 3kΩ
AD8290
The specifications for the bridge are show in Table 5 and the
chosen conditions for the AD8290 are listed in Table 6.
PRESSURE SENSOR BRIDGE APPLICATION
Given its excitation current range, the AD8290 provides a good
match with pressure sensor circuits. Two such sensors are the
Fujikura FGN-615PGSR and the Honeywell HPX050AS. Figure 47
shows the AD8290 paired with the Honeywell bridge and the
appropriate connections. In this example, a resistor, RP, is added
to the circuit to ensure that the maximum output voltage of the
AD8290 is not exceeded. Depending on the sensors specifications,
RP may not be necessary.
Given these specifications, calculations should be made to ensure
that the AD8290 is operating within its required ranges. The
combination of the excitation current and RP must be chosen
to ensure that the conditions stay within the minimum and
maximum specifications of the AD8290. For this example,
because the specifications of the HPX050AS are for a bridge
excitation voltage of 3.0 V, care must be taken to scale the
resulting voltage calculations to the actual bridge voltage. The
required calculations are shown in Table 7.
CFILTER
6.8nF
3.3V
RSET
2.7kΩ
13
RP
2kΩ
CBRIDGE
0.1µF
6
5
3
CF1
CF2
ENBL
11
RSET
VCC 2
IOUT
8
HPX050AS
2
14
VINN
15
VINP
AD8290
GND 10
C1
0.1µF
6
VOUT 4
5
NC
NC
NC
NC
NC
NC
1
7
8
9
12
16
C2
68nF
06745-030
4
NC = NO CONNECT
Figure 47. HPX050AS Pressure Sensor Application
Table 5. HPX050AS Specifications
Bridge Impedance (Ω)
Minimum
Maximum
4000
6000
Rated Offset (mV)
Minimum
Maximum
−30
+30
Rated Output Span (mV)
Minimum
Maximum
0
80
Bridge Excite Voltage (V)
3.0
Table 6. Typical AD8290 Conditions for Pressure Sensor Circuit
AD8290 VCC (V)
3.3 (2.6 to 5.5)
Excitation Current (μA)
333.3 (300 to 1300)
Parallel Resistor RP (Ω)
2000
Table 7. Pressure Sensor Circuit Calculations Compared to AD8290 Minimum/Maximum Specifications
Specification
Supply Current
Current Setting Resistor (RSET)
Minimum Equivalent Resistance to IOUT Pin
Maximum Equivalent Resistance to IOUT Pin
Minimum Current into Bridge
Maximum Current into Bridge
Minimum Bridge Midpoint Voltage (Excluding Offset/Span)
Maximum Bridge Midpoint Voltage (Excluding Offset/Span)
Minimum Voltage at Current Output Pin (IOUT)
Maximum Voltage at Current Output Pin (IOUT)
Input Voltage Minimum
Input Voltage Maximum
Output Voltage Minimum
Output Voltage Maximum
Calculation
1.867
2700
1333
1500
83.333
111.111
0.222
0.250
0.444
0.500
0.218
0.266
0.643
1.852
Rev. B | Page 18 of 20
Unit
mA
Ω
Ω
Ω
μA
μA
V
V
V
V
V
V
V
V
Allowable Range of AD8290
692 Ω to 3000 Ω
>0.0 V
<2.3 V
>0.2 V
<1.6 V
>0.075 V
<3.225 V
AD8290
TEMPERATURE SENSOR APPLICATION
ADC/MICROCONTROLLER
The AD8290 can be used with a temperature sensor. Figure 48
shows the AD8290 in conjunction with an RTD, in this
example, a 2-wire PT100. The specifications for the sensor are
shown in Table 8 and the chosen conditions for the AD8290 are
listed in Table 9.
In both of the previous applications, an ADC or a microcontroller
can be used to follow the AD8290 to convert the output analog
signal to digital. For example, if there are multiple sensors in the
system, the six channel ADuC814ARU microcontoller is an
excellent candidate to interface with multiple AD8290s.
Once again, care must be taken when picking the excitation
current and RG such that the minimum and maximum
specifications of the AD8290 are not exceeded. Sample
calculations are shown in Table 10.
CFILTER
6.8nF
3.3V
RSET
3kΩ
11
RSET
6
5
3
CF1
CF2
ENBL
VCC 2
13 IOUT
CBRIDGE
0.1µF
15
AD8290
VINP
GND 10
C1
0.1µF
RTD
14 VINN
VOUT 4
NC
NC
NC
NC
NC
NC
1
7
8
9
12
16
C2
68nF
06745-044
RG
698Ω
NC = NO CONNECT
Figure 48. PT100 Temperature Sensor Application Connections
Table 8. PT100 Specifications
RTD Minimum @ 0°C
100 Ω
RTD Maximum @ 100°C
138.5 Ω
Table 9. Typical AD8290 Conditions for Temperature Sensor Circuit
AD8290 VCC (V)
3.30 (2.6 to 5.5)
Excitation Current (μA)
300 (300 to 1300)
Resistor from RTD to GND, RG (Ω)
698
Table 10. Temperature Sensor Circuit Calculations Compared to AD8290 Minimum/Maximum Specifications
Specification
Supply Current
Current Setting Resistor (RSET)
Minimum Equivalent Resistance to IOUT Pin
Maximum Equivalent Resistance to IOUT Pin
Minimum Voltage @ Current Output Pin (IOUT)
Maximum Voltage @ Current Output Pin (IOUT)
Input Voltage Minimum
Input Voltage Maximum
Output Voltage Minimum
Output Voltage Maximum
Calculation
1.8
3000
798
836.5
0.239
0.251
0.209
0.251
2.365
3.013
Rev. B | Page 19 of 20
Unit
mA
Ω
Ω
Ω
V
V
V
V
V
V
Allowable Range of AD8290
692 Ω to 3000 Ω
>0.0 V
<2.3 V
>0.2 V
<1.6 V
>0.075 V
<3.225 V
AD8290
OUTLINE DIMENSIONS
3.00
BSC SQ
PIN 1
INDICATOR
13
12
16
1
1.80
1.70 SQ
1.55
EXPOSED
PAD
0.50
BSC
TOP VIEW
0.60
0.55
0.51
SEATING
PLANE
9
8
5
4
BOTTOM VIEW
0.40 MAX
0.30 NOM
0.05 MAX
0.02 NOM
0.30
0.25
0.18
0.08 REF
053106-B
INDEX
AREA
COMPLIANT TO JEDEC STANDARDS MO-248-UEED.
Figure 49. 16-Lead Lead Frame Chip Scale Package [LFCSP_UQ]
3 mm × 3 mm Body, Ultra Thin Quad
(CP-16-12)
Dimensions shown in millimeters
ORDERING GUIDE
Model
AD8290ACPZ-R2 1
AD8290ACPZ-R71
AD8290ACPZ-RL1
1
Temperature Range
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
Package Description
16-Lead LFCSP_UQ
16-Lead LFCSP_UQ
16-Lead LFCSP_UQ
Z = RoHS Compliant Part.
©2007–2008 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D06745-0-2/08(B)
Rev. B | Page 20 of 20
Package Option
CP-16-12
CP-16-12
CP-16-12
Branding
Y0J
Y0J
Y0J
Similar pages