CM600E3U-12NFH Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Chopper IGBTMOD™ NFH-Series Module 600 Amperes/600 Volts A D S S K K K V L (4 PLACES) Q M (3 PLACES) G G2 E2 B E H E1 C2E1 C1 E2 G G1 N J AA Q Z F F Q X V Q P Y T P P U S C W LABEL R G2 E2 Tr2 C2E1 E2 Di1 C1 Di2 FREE WHEEL DIODE G1 (NC) E1 (NC) CLAMP DIODE Outline Drawing and Circuit Diagram Dimensions Inches Millimeters Dimensions Inches A 4.25 108.0 P 0.71 2.44 62.0 Q 0.28 R 0.874 B C 1.14+0.04/-0.02 29.0+1.0/-0.5 Millimeters 18.0 7.0 22.2 D 3.66±0.01 93.0±0.25 S 0.30 7.5 E 1.89±0.01 48.0±0.25 T 0.94 24.0 F 0.98 25.0 U 0.11 2.8 G 0.24 6.0 V 0.16 4.0 H 0.59 15.0 W 0.33 8.5 J 0.7854 19.95 X 0.46 11.75 14.0 Y 0.012 ~ 0 6.5 Dia. Z 0.85 21.5 M6 Metric M6 AA 0.69 17.5 1.022 25.95 K 0.55 L 0.26 Dia. M N 10/12 Rev. 0 0.3 ~ 0 Description: Powerex Chopper IGBTMOD™ Modules are designed for use in switching applications. Each module consists of one IGBT Transistor having a reverse-connected superfast recovery free-wheel diode and an anode-collector connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: £ Low Drive Power £ Low VCE(sat) £ Discrete Super-Fast Recovery (150ns) Free-Wheel Diode £ High Frequency Operation (15-20kHz) £ Isolated Baseplate for Easy Heat Sinking Applications: £ DC Motor Control £ Boost Regulator Ordering Information: Example: Select the complete module number you desire from the table - i.e. CM600E3U-12NFH is a 600V (VCES), 600 Ampere Chopper IGBTMOD™ Power Module. Type Current Rating Amperes VCES Volts (x 50) CM 600 12 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM600E3U-12NFH Chopper IGBTMOD™ NFH-Series Module 600 Amperes/600 Volts Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol CM600E3U-12NFH Units Volts Collector-Emitter Voltage (G-E SHORT) VCES 600 Gate-Emitter Voltage (C-E SHORT) VGES ±20 Volts IC 600 Amperes ICM 1200 Amperes Collector Current Collector Current (Pulse)*2 Emitter Current (TC = 25°C)*6 *1 IE 30 Amperes Emitter Current (Pulse)*2 IEM*1 60 Amperes Maximum Power Dissipation (TC = 25°C)*6 PC*3 1420 Watts Maximum Power Dissipation (TC' = 25°C)*8 PC'*3 2460 Watts Repetitive Peak Reverse Voltage (Clamp Diode Part) VRRM 600 Volts IF 600 Amperes Forward Current (Pulse, Clamp Diode Part)*2 IFM 1200 Amperes Isolation Voltage (Charged Part to Baseplate, AC 1 min.) Volts Forward Current (TC = 25°C, Clamp Diode Part) Viso 2500 Junction Temperature Tj -40 ~ +150 °C Storage Temperature Tstg -40 ~ +125 °C *1 *2 *3 *6 *8 Represent ratings and characteristics of the anti-parallel, emitter-to-collector free wheeling diode (FWDi). Pulse width and repetition rate should be such that device junction temperature (Tj) does not exceed Tj(max) rating. Junction temperature (Tj) should not increase beyond maximum junction temperature (Tj(max)) rating. Case temperature (TC) measured point is baseplate side. Case temperature (Ts) measured point is just under the chips as shown in the following figure. 81.0 70.4 36.2 0 TC MEASURED POINT 0 0 15.4 Di2 Di1 20.4 33.2 Di1 72.7 Tr2 48.6 0 33.8 Tr2 35.4 Di1 LABEL SIDE Each mark points to the center position of each chip. Tr2: IGBT 2 Di2: FWDi Di1: Clamp Diode 10/12 Rev. 0 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM600E3U-12NFH Chopper IGBTMOD™ NFH-Series Module 600 Amperes/600 Volts Static Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Collector Cutoff Current Symbol Test Conditions Min. Typ. Max. ICES VCE = VCES, VGE = 0V – – 1 Units mA Gate Leakage Current IGES ±VGE = VGES, VCE = 0V – – 1 µA Repetitive Peak Reverse Current IRRM VRM = VRRM, Clamp Diode Part IC = 60mA, VCE = 10V – – 1 mA Gate-Emitter Threshold Voltage Collector-Emitter Saturation Voltage VGE(th) VCE(sat) 5 6 7 Volts 25°C*3 – 2.0 2.7 Volts IC = 600A, VGE = 15V, Tj = 125°C*3 – 1.95 – Volts 420 – – S – – 166 nF – – 11 nF – – – 3720 – – IC = 600A, VGE = 15V, Tj = IC = 600A, VCE = 10V*3 Forward Transfer Admittance |yfs| Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Total Gate Charge QG Turn-on Delay Time td(on) VCC = 300V, IC = 600A, VGE = 15V VCC = 300V, Turn-on Rise Time tr IC = 600A, IE = 30A, – – 400 ns Turn-off Delay Time td(off) VGE1 = VGE2 = 15V, – – 1100 ns tf RG = 2.0Ω, – – 200 ns Turn-off Fall Time *1 VGE = 0V, VCE = 10V 6.0 nF – nC 800 ns Reverse Recovery Time trr Inductive Load – – 110 ns Reverse Recovery Charge Qrr*1 Switching Operation – 0.08 – µC Emitter-Collector Voltage VEC*1 – – 2.8 Volts Forward Voltage Drop 2.5 Volts VFM IE = 30A, VGE = 0V IF = 600A, Clamp Diode Part – – Reverse Recovery Time trr Clamp Diode Part – – 200 ns Reverse Recovery Charge Qrr VCC = 300V, IF = 600A, – 10 – µC – 2 Ω VGE1 = VGE2 = 15V, RG = 2.0Ω, Inductive Load Switching Operation External Gate Resistance RG 0.2 *1 Represent ratings and characteristics of the anti-parallel, emitter-to-collector free wheeling diode (FWDi). *3 Junction temperature (Tj) should not increase beyond maximum junction temperature (Tj(max)) rating. 10/12 Rev. 0 3 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com CM600E3U-12NFH Chopper IGBTMOD™ NFH-Series Module 600 Amperes/600 Volts Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Thermal Resistance, Junction to Case Symbol Test Conditions Min. Typ. Rth(j-c)Q IGBT Part*6 – – 0.088 °C/W – – 0.08 °C/W – 0.04 – °C/W Thermal Resistance, Junction to Case Rth(j-c)R Contact Thermal Resistance Rth(c-s) Clamp Diode Part*6 Case to Heatsink,Per 1/2 Module, Thermal Grease Max. Units Applied*7 Thermal Resistance, Junction to Case Rth(j-c')Q IGBT Part*8 – – 0.053 °C/W Thermal Resistance, Junction to Case Rth(j-c')R Clamp Diode Part*8 – – 0.052 °C/W Symbol Test Conditions Min. Typ. Mechanical Characteristics Characteristics Mounting Torque Max. Units Mt Main Terminals, M6 Screw 31 35 40 in-lb Ms Mounting Holes, M6 Screw 31 35 40 in-lb Weight – 400 – Grams *6 Case temperature (TC) measured point is baseplate side. *7 Typical value is measured by using thermally conductive grease of λ = 0.9 W/(m•K). *8 Case temperature (Ts) measured point is just under the chips as shown in the following figure. 81.0 70.4 36.2 0 TC MEASURED POINT 0 0 15.4 Di2 Di1 20.4 33.2 Di1 72.7 Tr2 48.6 0 33.8 Tr2 35.4 Di1 LABEL SIDE Each mark points to the center position of each chip. Tr2: IGBT 4 Di2: FWDi Di1: Clamp Diode 10/12 Rev. 0