Tenand LTV-817S-TA High density mounting type photocoupler Datasheet

深圳市腾恩科技有限公司
SHENZHEN TENAND TECHNOLOGY CO.,LTD
http://www.tenand.com
High Density Mounting
Type Photocoupler
LTV-817 Series
Features
Current transfer ratio
(CTR : MIN. 50% at IF=5mA, VCE=5V)
High input-output isolation voltage:
(VISO : 5,000Vrms)
Compact dual-in-line package
LTV-817 : 1-channel type
LTV-827 : 2-channel type
LTV-847 : 4-channel type
UL approved (No. E113898)
TUV approved (No. R9653630)
CSA approved (No. CA91533-1)
FIMKO approved (No. 202634)
NEMKO approved (No. P98101945)
DEMKO approved (No. 307857)
SEMKO approved (No. 9832157/01-03)
VDE approved (No. 094722)
Options available :
-Leads with 0.4"(10.16mm)spacing (M Type)
-Leads bends for surface mounting(S Type)
-Tape and Reel of Type I for SMD(Add"-TA"Suffix)
-Tape and Reel of Type II for SMD(Add"-TA1"Suffix)
-VDE 0884 approvals (Add"-V"Suffix)
Applications
1.
2.
3.
4.
5.
Computer terminals.
System appliances, measuring instruments.
Registers, copiers, automatic vending machines.
Electric home appliances such as fan heaters, etc.
Signal transmission between circuits of different
potentials and impedances.
深圳市腾恩科技有限公司
12-110
SHENZHEN
TENAND TECHNOLOGY CO.,LTD
http://www.tenand.com
Package Dimensions
Note:
1.Year date code.
2. 2-digit work week.
3. Factory code shall be marked (Z : Taiwan, Y : Thailand).
4.Rank shall be or shall not be marked.
5. All dimensions are in millimeters (inches).
0.25mm (.010 ) unless otherwise noted.
6. Tolerance is
7. Specifications are subject to change without notice.
Part Number
Package
LTV-817
LTV-817M
LTV-817S
LTV-817S-TA
LTV-817S-TA1
LTV-827
LTV-827M
LTV-827S
LTV-827S-TA
LTV-827S-TA1
LTV-847
LTV-847M
LTV-847S
4-pin DIP
4-pin (leads with 0.4" spacing)
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type
4-pin (tape and reel packaging of type
8-pin DIP
8-pin (leads with 0.4" spacing)
8-pin (lead bends for surface mount)
8-pin (tape and reel packaging of type
8-pin (tape and reel packaging of type
16-pin DIP
16-pin (leads with 0.4" spacing)
16-pin (lead bends for surface mount)
LTV817-V
LTV817M-V
LTV817S-V
LTV817STA-V
LTV817STA1-V
LTV827-V
LTV827M-V
LTV827S-V
LTV827STA-V
LTV827STA1-V
LTV847-V
LTV847M-V
LTV847S-V
4-pin DIP
4-pin (leads with 0.4" spacing)
4-pin (lead bends for surface mount)
4-pin (tape and reel packaging of type
4-pin (tape and reel packaging of type
8-pin DIP
8-pin (leads with 0.4" spacing)
8-pin (lead bends for surface mount)
8-pin (tape and reel packaging of type
8-pin (tape and reel packaging of type
16-pin DIP
16-pin (leads with 0.4" spacing)
16-pin (lead bends for surface mount)
Safety Standard Approval
I)
II)
UL approved
TUV approved
CSA approved
FIMKO approved
NEMKO approved
SEMKO approved
DEMKO approved
Application part
number
LTV-817
PHOTOCOUPLER
Ordering Information
LTV-827
I)
II)
LTV-847
VDE approved
LTV-817
I)
II)
LTV-827
I)
II)
LTV-847
12-111
Ltv817.p65
Page 111
2000/7/11, ¤U¤È 12:29
Adobe PageMaker 6.5C/Win
Absolute Maximum Ratings
(Ta=25 )
Parameter
Input
Output
Symbol
Rating
Unit
Forward Current
IF
50
mA
Reverse Voltage
VR
6
V
Power Dissipation
P
70
mW
Collector-Emitter Voltage
V CEO
35
V
Emitter-Collector Voltage
V ECO
6
V
IC
50
mA
Collector Current
PC
150
mW
Total Power Dissipation
P tot
200
mW
Operating Temperature
Topr
-30~+100
Tstg
-55~+125
Collector Power Dissipation
Storage Temperature
*1.Isolation Voltage
V iso
5
*2.Soldering Temperature
Tsol
260
KV rms
*1. AC for 1 minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side.
(2)The isolation voltage tester with zero-cross circuit shall be used.
(3)The waveform of applied volttage shall be a sine wave.
*2. For 10 seconds.
Electrical/Optical Characteristics
Transfer Characteristics
Output
Input
Parameter
Forward Voltage
Symbol
Min.
Typ.
Max.
Unit
1.2
1.4
V
10
A
30
250
pF
V=0, f=1KHz
100
VF
Reverse Current
IR
Terminal Capacitance
Ct
Collector Dark Current
Collector-Emitter
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
*Current Transfer Ratio
(Ta=25 )
V R =4V
nA
V CE =20V
35
V
I C=0.1mA
BV ECO
6
V
I E=10
CTR
50
600
%
IC
2.5
30
mA
0.2
V
1.0
pF
I CEO
BV CEO
Collector Current
Collector-emitter
Saturation Voltage
Isolation Resistance
V CE(sat)
Floating Capacitance
Cf
0.6
Cut-off Frequency
fc
80
Response Time (Rise)
tr
4
18
s
Response Time (Fall)
tf
3
18
s
IC
*CTR= IF
Conditions
I F=20mA
R ISO
0.1
5
10
10
10
11
I F =5mA, VCE =5V R BE=
I F=20mA, I C=1mA
DC500V, 40~60% R.H.
KHz
V=0, f=1MHz
V CE =5V, I C =2mA
R L=100 , -3dB
V CE =2V, I C =2mA
R L=100
100%
Supplement
Rank Table of Current Transfer Ratio CTR
Model No.
Rank Mark
CTR(%)
LTV-817
L
50~100
LTV-817
A
80~160
LTV-817
B
130~260
LTV-817
C
200~400
LTV-817
D
300~600
LTV-817
L or A or B or C or D
Conditions
12-112
A
I F=5mA V CE =5V Ta=25
50~600
PHOTOCOUPLER
Typical Electrical/Optical Characteristic Curves
(25 Ambient Temperature Unless Otherwise Noted)
12-113
Ltv817.p65
Page 113
2000/7/11, ¤U¤È 12:29
Adobe PageMaker 6.5C/Win
12-114
Similar pages