DCDC 1 Watt xppower.com ID Series Specification Single & Dual Output • SIP Package • Industry Standard Pinout • 6000 VDC Isolation • 40 °C to +85 °C Operation • MTBF >3 MHrs • 3 Year Warranty Input Voltage Input Input Voltage Range Input Reverse Voltage Protection • • Nominal ±10% • None 5 VDC Output Output Voltage • Minimum Load • Line Regulation • Load Regulation • Setpoint Accuracy • Ripple & Noise • Temperature Coefficient • Short Circuit Protection • See table 10% 1.2%/1% ∆ Vin 7.5% 10-100% load change 100-110% of nominal at 10% load 200 mV pk-pk 20 MHz bandwidth 0.03%/°C 5 V input: 1 s max, 12 V input: continuous MTBF • • • • • See table 6000 VDC, 1 mA max 109 Ω 10 pF typical 5 V input: 250 kHz, 12 V input: 50 kHz typical at nominal input and full load • >3 MHrs to MIL-HDBK-217F at 25 şC, GB Environmental Operating Temperature Storage Temperature Case Temperature Cooling -40 °C to +85 °C -55 °C to +125 °C 105 °C max Convection-cooled Efficiency (typ) Model Number(1) 5.0 V 200 mA 70% ID0505SA 9.0 V 111 mA 72% ID0509SA 12.0 V 84 mA 73% ID0512SA 15.0 V 67 mA 74% ID0515SA 5.0 V 200 mA 70% ID1205SA 9.0 V 111 mA 71% ID1209SA 12.0 V 84 mA 72% ID1212SA 15.0 V 67 mA 75% ID1215SA 1. For dual output versions, delete ‘A’ from part number and split current equally between outputs. Mechanical Details Weight: 0.009 lbs (4.2 g) Bottom View 1 2 5 6 7 0.77 (19.50) 0.38 (9.80) 0.079 (2.00) 0.161 (4.10) 0.1 (2.54) Single Output Dual Output Pin 1 2 5 6 7 2 0.49 (12.50) Side View 0.02 (0.50) Recommended footprint Top view grid: 0.1 x 0.1 in (2.54 x 2.54 mm) Diameter: 0.39” (1.0 mm) 1 • • • • Output Current Notes 0.10 (2.50) General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency 12 VDC Output Voltage 5 6 7 Single Vin GND 0V No Pin +Vo 1 2 5 7 Dual Vin GND -Vo 0V +Vo Notes Dimensions in inches (mm) Tolerance: ±0.010 (±0.25) Pin diameter: 0.020 x 0.012 (0.50 x 0.30) Pin tolerance: ±0.004 (±0.10 mm) 15-Dec-09