MKC 1860* Vishay Roederstein Metallized Polycarbonate Film Capacitor Related Document: IEC 60 384-6 MAIN APPLICATIONS: Dimensions in millimeters Storage, filter, timing and integrating circuits. Ød MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture 40.0 ± 5.0 L Max. DIELECTRIC: 40.0 ± 5.0 D Max. Polycarbonate film D Ød Vacuum deposited aluminum ≤ 7.0 0.7 COATING: < 16.0 0.8 Plastic-wrapping, epoxy resin sealed ≥ 16.5 1.0 ELECTRODES: CONSTRUCTION: Extended metallized film (refer to general information) TIME CONSTANT: LEADS: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute Tinned wire For C > 0.33µF and UR > 100 VDC: 10,000 s minimum value (40,000 s typical value) IEC TEST CLASSIFICATION: For C > 0.33µF and UR ≤ 100 VDC: 55/100/21, according to IEC 60068 5,000 s minimum value (15,000 s typical value) OPERATING TEMPERATURE RANGE: CAPACITANCE DRIFT: - 55°C to + 100°C Up to + 40°C, ± 2% for a period of two years CAPACITANCE RANGE: 0.01µF to 10µF DERATING FOR DC AND AC. CATEGORY VOLTAGE UC: CAPACITANCE TOLERANCES: ± 10% (K), ± 5% (J) At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR RATED VOLTAGES (UR): SELF INDUCTANCE: 63 VDC, 100 VDC, 250 VDC, 400 VDC ~ 12 nH measured with 6mm long leads PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: PULL TEST ON LEADS: 40 VAC, 63 VAC, 160 VAC, 200 VAC ≥ 20 N in direction of leads according to IEC 60068-2-21 TEST VOLTAGE (ELECTRODE/ELECTRODE): BEND TEST ON LEADS: 1.6 x UR for 2 s 2 bends through 90° with half of the force used in pull test INSULATION RESISTANCE: RELIABILITY: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute Operational life > 300,000 h Failure rate < 1 FIT (40°C and 0.5 x UR) For C ≤ 0.33µF and UR > 100 VDC: 30,000 MΩ minimum value (100,000 MΩ typical value) For C ≤ 0.33µF and UR ≤ 100 VDC: For further details, please refer to the general information provided in this catalog. 15,000 MΩ minimum value (50,000 MΩ typical value) MAXIMUM PULSE RISE TIME Maximum pulse rise time dv/dt [V/µs] CAPACITOR LENGTH (mm) 14 19 26.5 31.5 63 VDC 100 VDC 250 VDC 400 VDC 17 9 6 5 23 13 8 6 38 21 13 10 61 33 20 16 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Please note: these capacitors are not recommended for new designs www.vishay.com 98 For technical questions, contact [email protected] Document Number 26028 Revision 01-Dec-03 MKC 1860* Vishay Roederstein Metallized Polycarbonate, Related Document: IEC 60 384-6 DISSIPATION FACTOR TAN δ C ≤ 0.1µF MEASURED AT 1kHz 3 x 10 10kHz 4 x 10-3 100kHz 0.1µF < C ≤ 1.0µF -3 10 x 10 3 x 10 C > 1.0µF -3 3 x 10-3 4 x 10-3 — — — -3 Maximum values CAPACITANCE CAPACITANCE CODE 0.01 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF µF - 310 - 315 - 322 - 333 - 347 - 368 - 410 - 415 - 422 - 433 - 447 - 468 - 510 - 515 - 522 - 533 - 547 - 568 - 610 VOLTAGE CODE 06 63 VDC/ 40 VAC VOLTAGE CODE 01 100 VDC/ 63 VAC VOLTAGE CODE 25 250 VDC/ 160 VAC VOLTAGE CODE 40 400 VDC/ 200 VAC D L D L D L D L — — — — — — — — 6.0 6.0 7.0 6.5 7.5 8.5 9.0 9.5 11.0 12.0 14.0 — — — — — — — — 14.0 14.0 14.0 19.0 19.0 19.0 19.0 26.5 26.5 31.5 31.5 — — — — — — 6.0 6.0 6.0 6.0 7.0 8.0 9.0 9.0 10.5 12.5 13.0 15.5 17.5 — — — — — — 14.0 14.0 14.0 19.0 19.0 19.0 19.0 26.5 26.5 26.5 31.5 31.5 31.5 — — — 6.0 6.0 6.0 7.0 7.5 7.0 8.0 9.5 9.0 10.5 11.5 13.5 — — — — — — — 14.0 14.0 14.0 14.0 14.0 19.0 19.0 19.0 26.5 26.5 31.5 31.5 — — — — 6.0 6.0 6.0 6.0 7.0 8.0 7.5 8.5 8.5 10.0 11.5 12.0 14.5 — — — — — — 14.0 14.0 14.0 14.0 14.0 14.0 19.0 19.0 26.5 26.5 26.5 31.5 31.5 — — — — — — Further C-values upon request pcm = L + 3.5 RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLE G AMMO — MKC 1860-422/404-G X R REEL 350 MKC 1860-422/404-R X — BULK — MKC 1860-422/404 X Please note: these capacitors are not recommended for new designs Document Number 26028 Revision 01-Dec-03 For technical questions, contact [email protected] www.vishay.com 99 MKC 1860* Metallized Polycarbonate, Related Document: IEC 60 384-6 100 7 VRMS VRMS Vishay Roederstein Capacitance in µF 5 2 .0 0.4 7 10 .0 6. 8 3.3 10 7 5 8 4.7 2 .2 1 .5 3 2 0.4 7 0.6 10 0.3 3 0.3 3 10 7 5 0.1 5 0.2 2 3 100 7 1.0 3 0.6 2.2 8 1.5 1.0 3 2 2 Capacitance in µF 100 VDC 63 VDC 1 1 102 2 3 5 7 103 2 3 7 104 5 2 3 5 7 105 102 2 3 7 103 5 2 3 7 104 5 2 3 5 f [Hz] 1000 7 f [Hz] Permissible AC Voltage versus Frequency Capacitance in µF 5 VRMS VRMS Permissible AC Voltage versus Frequency 7 105 1000 7 Capacitance in µF 5 3 3 2 2 0.0 0.0 33 100 7 5 100 7 5 0.0 47 0.1 3 2.2 1 .5 2 1.0 250 VDC 47 0.0 68 1.0 0 .6 3 0.1 5 0.6 8 0.3 3 0.2 2 1 0.0 0.1 0.3 3 0.2 8 0. 47 2 400 VDC 2 10 10 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 102 2 3 5 7 103 2 3 5 7 104 f [Hz] Permissible AC Voltage versus Frequency 2 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency Please note: these capacitors are not recommended for new designs www.vishay.com 100 For technical questions, contact [email protected] Document Number 26028 Revision 01-Dec-03