GBJL10J THRU GBJL10M Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage - 600V to 1000V Forward Current - 10.0 Amperes Features ◆ Thin Single In-Line package; ◆ Ideal for printed circuit boards; ◆ Glass Passivated chip junction; ◆ Low profile package; ◆ High Surge current capability; ◆ High case dielectric strength of 2500 V RMS; ◆ Plastic package has Underwrites Laboratory Flammability Classification 94V-0; ◆ Same footprint V.S GBJ package; ~ ~ + Mechanical Data ◆ Case: GBJL; Epoxy meets UL-94V-0 Flammability rating; ◆ Terminals:Matte tin plated leads, solderable per J-STD-002 and JESD22-B102; E3 suffix for customer grade, meet JESD 201; ◆ High temperature soldering guaranteed: Solder Dip 270℃,10seconds; ◆ Polarity: As marked on body; ◆ Mounting Torgue: 10cm-kg (8.8inches-lbs) max; ◆ Recommend Torgue:Mounting Torgue: 5.7cm-kg (5inches-lbs); Typical Applications General purpose use in AC-to-DC bridge full wave rectification for Switching Power Supply, Home Appliances, Office Equipment, Industrial Automation applications. Package Dimensions in mm Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Symbol GBJL10J Parameter GBJL10K GBJL10M Maximum repetitive peak reverse voltage VRRM 600 800 Maximum RMS voltage VRMS 420 Maximum DC blocking voltage VDC 600 Maximum average forward rectified output current at TC=110℃ TA=25℃ Peak forward surge current 8.3 ms single sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t<8.3ms) Maximum Instantaneous forward voltage drop per leg at 5.0A Maximum DC Reverse Current at Rated DC Blocking Voltage per leg TA=25℃ TA=125℃ Typical thermal resistance per leg Operating junction and Storage Temperature Range IF(AV) Unit 1000 V 560 700 V 800 1000 V 10 (1) 3.0 (2) Amps IFSM 180 Amps I2 t VF 135 A2sec Volt IR 0.98 5 150 RӨJA 22 (2) RӨJC 2.1 (1) -55 to +150 TJ,TSTG μA ℃/W ℃ Notes: 1). Unit case mounted on Al plate heatsink; 2). Units mounted on PCB without heatsink; 3). Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw. GBJL10J THRU GBJL10M Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage - 600V to 1000V Forward Current - 10.0 Amperes RATINGS AND CHARACTERISTICS CURVES (TA=25℃ unless otherwise noted) 180 Peak Forward Surge Current (A) Average Forward Output Current (A) 12 Heatsink Mounting,TC 10 8 6 4 P.C.B Mounting,TA 2 0 50 0 100 TJ=TJ Max. Single Sine-Wave 120 60 1.0 Cycle 0 150 Figure 2. Maximum Non-Repetitive Peak Forward Surge Current per Diode 100 1000 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 Number of Cycles at 60Hz Figure 1. Derating Curve Output Rectified Current TJ=25℃ 1 0.1 0.01 0.6 0.8 1.0 1.2 10 1000 TJ=150℃ 100 10 TJ=125℃ 1 0.1 0.01 TJ=25℃ 40 60 80 0.1 1 10 100 Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode 0.001 20 100 1 0.4 Instantaneous Forward Voltage (V) Instantaneous Reverse Current (A) 10 1 Temperature (℃) 100 Percent of Rated Peak Reverse Voltage (%) Figure 5. Typical Reverse Characteristics Per Diode Figure 4. Typical Junction Capacitance Per Diode