Connor-Winfield EML3313 Leadless surface mount 3.3v pecl clock Datasheet

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ABSOLUTE MAXIMUM RATINGS
PARAMETER
UNITS
Supply Voltage
EML3313
TABLE 1.0
Storage Temperature
(Vcc)
MINIMUM
NOMINAL
MAXIMUM
UNITS
-55
-
105
°C
-0.5
-
7.0
Vdc
NOTE
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
19.44
-100
0
-
164
100
85
MHz
ppm
°C
1
Vdc
DESCRIPTION
OPERATING SPECIFICATIONS
The Connor-Winfield EML3313
is a fixed frequency surface
mount Crystal Controlled
Oscillator (OX) designed for
applications requiring low jitter
and a ±100ppm Frequency
stability. Operating at 3.3V
supply voltage, the EML3313
provides LVPECL compatible
outputs with enable/disable.
TABLE 2.0
PARAMETER
Frequency Range
Total Frequency Tolerance
Operating Temperature Range
(Fo)
Supply Voltage
(Vcc)
3.135
3.3
3.465
Supply Current
(Icc)
-
-
60
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
ps rms
Jitter (BW=12kHz to 20MHz)
-
-
1
ps rms
Sub Harmonics
-
-60
-
dB
SSB Phase Noise at 10Hz offset
-
-60
-
dBc/Hz
SSB Phase Noise at 100Hz offset
-
-90
-
dBc/Hz
SSB Phase Noise at 1KHz offset
-
-100
-
dBc/Hz
SSB Phase Noise at 10KHz offset
-
-125
-
dBc/Hz
SSB Phase Noise at 10KHz offset
-
-135
-
dBc/Hz
NOMINAL
MAXIMUM
-
UNITS
TABLE 3.0
NOTE
Vdc
2
1.68
Vdc
2
INPUT CHARACTERISTICS
PARAMETER
Disable Input Voltage (High)
(Vih)
MINIMUM
2.275
Enable Input Voltage (Low)
(Vil)
-
-
CW 0701
EML3313
155.52M
LEADLESS SURFACE MOUNT 3.3V PECL CLOCK
FEATURES
3.3V OPERATION
LOW JITTER <1ps RMS
PECL OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
Duty Cycle
Rise / Fall Time 20% to 80%
TABLE 4.0
(Voh)
(Vol)
MINIMUM
2.275
45
-
NOMINAL
50
-
MAXIMUM
50
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
nS
PACKAGE CHARACTERISTICS
FREQUENCY STABILITY ±100PPM
NOTE
3
ENABLE/DISABLE
SURFACE MOUNT PACKAGE
4
TAPE AND REEL PACKAGING
TABLE 5.0
Package
Hermetically sealed, leadless ceramic package
Notes
1) Includes calibration, stability vs. t emperature, supply and load variations, shock, vibration and aging (10 years).
2) When oscillator is disabled the true out put is in a low state (Vol) and the complementary output is in the high s tate (VoH)
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
ORDERING INFORMATION
EML3313
PECL
SERIES
- 155.52 MHz
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #: Ec136
PAGE 1
OF
2
REV: 01
DATE:
9/24/03
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
CW 0701
EML3313
155.52M
PIN
1
2
3
4
5
6
FUNCTION
Q OUTPUT (COMP)
N/C
GROUND
Q OUTPUT
N/C
Vcc
SUGGESTED PAD LAYOUT
OUTPUT WAVEFORM
TEST CIRCUIT
Specifications subject to change without notice.
DATA SHEET #: Ec136
PAGE 2
OF
2
REV: 01
DATE:
9/24/03
aCopyright 2001 Connor-Winfield all rights reserved.
Similar pages