Taiyo Yuden AF216F2450S1-T Chip antenna Datasheet

Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ).
It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
1
notice_e-01
CHIP ANTENNA
REFLOW
■ FEATURES
■ APPLICATIONS
◦Compact and Low-profile
◦Bluetooth®, Wireless LAN, GPS, WiMAX, ZigBee, UWB
◦Wide bandwidth and High Gain
◦Stable temperature characteristics
■ ORDERING CODE
A
△
F
❶
AH
AF
2
1
❷
6
❸
❷Electrode Code
△ With Plating
△=Blank space
2
4
5
❹
❸Dimensions (case size)[mm]
216
2.5×1.6
816
8.0×1.6
116
11.0×1.6
316
3.2×1.6
083
8.0×3.0
104
10.0×4.0
122
12.0×2.0
086
8.0×6.0
❶Type
Multilayer Antenna
Helical Antenna
M
0
0
❺
❹Special Code
Inverted F
Mono Pole
Mono Pole
N
(Dual)
F
M
❻
❺Frequency[MHz]
1574.397~1576.443
2400~2500
3100~8000
1. Describe Center Frequency
2. Lower Frequency for Dualband
T
❼
ーT
example
1575
2450
5550
-
1
❼Packaging
Tape & Reel
❻Spec Code
01~
S1~ Applicable to AH104F
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
AF 216M Type, AF 816M Type, AF 116M Type
AH 316M Type
AH 083F Type
AH 104N Type
AH 086M Type
AH 104F Type
E
AH 122F Type
Standard Quantity (pcs)
Embossed Tape
Type
L
W
T
E
a
b
c
AF 216M
AF 816M
AF 116M
AH 316M
AH 083F
AH 104F
AH 122F
AH 104N
AH 086M
2.5±0.2
8±0.2
11±0.2
3.2±0.15
8±0.3
10±0.3
12±0.3
10±0.3
8±0.3
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.15
3±0.3
4±0.3
2±0.3
4±0.3
6±0.3
1.6±0.2
1.6±0.2
1.6±0.2
0.5±0.1
1±0.3
1±0.3
0.95±0.3
1±0.3
1±0.3
0.5±0.3
0.5±0.3
0.5±0.3
0.5±0.2
ー
ー
ー
ー
ー
ー
ー
ー
ー
3.1±0.3
2.5±0.3
5.1±0.3
3±0.3
1.8±0.2
ー
ー
ー
1.0 min.
1±0.3
1±0.3
1±0.3
0.8±0.3
1±0.3
ー
ー
ー
ー
1.15±0.3
1±0.3
3.1±0.3
1.5±0.3
ー
2000
3000
1000
2000
1000
Unit : mm (inch)
■ PART NUMBERS
Applications
GPS
W-LAN (2.4GHz)
Bluetooth®
WiMAX (2.5GHz)
ZigBee
W-LAN (2.4GHz/5GHz)
UWB & WiMAX (3.5GHz)
Ordering Code
AF816M157502
AF116M157502
AH316M157501
AF216M245001
AH316M245001
AH083F245001
AH104F2450S1
AH104F2650S1
AH122F245001
AH104N2450D1
AH086M555001
AH086M555003
External Dimensions (mm)
8.0×1.6×1.6
11.0×1.6×1.6
3.2×1.6×0.5
2.5×1.6×1.6
3.2×1.6×0.5
8.0×3.0×1.0
10.0×4.0×1.0
10.0×4.0×1.0
12.0×2.0×0.95
10.0×4.0×1.0
8.0×6.0×1.0
8.0×6.0×1.0
Center Frequency (MHz)
1575
1575
1575
2450
2450
2450
2450
2650
2450
2450/5400
5550
5550
* This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
148
1
chipantenna01_e-01
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
Typical Characteristics on Taiyo Yuden evaluation board
●AF 816M157502
11
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
+X
Bandwidth: 180MHz
(VSWR: less than 2)
+Z
−X
−Y
−Y
+Y
Vertical
polarization
Vertical
polarization
1.325
1.575
1.825
Horizontal
polarization
−Z
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@1.575GHz)
Typical characteristics of VSWR
●AH 116M157502
ZX-Plane
+X
XY-Plane
+X
−X
−Z
+Y
+X
Bandwidth:125MHz
(VSWR:less than2)
−X
−Y
+Z
−Y
+Y
Vertical
polarization
Vertical
polarization
1.325
1.575
1.825
Horizontal
polarization
−Z
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@1.575GHz)
Typical characteristics of VSWR
●AH 316M157501
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
+X
Bandwidth: 90MHz
(VSWR: less than 2)
−X
−Y
+Z
−Y
+Y
Vertical
polarization
1.325
1.575
Vertical
polarization
Horizontal
polarization
1.825
−Z
Horizontal
polarization
+X
HIGH FREQUENCY DIELECTRIC COMPONENT
+Z
Typical characteristics of radiation pattern(@1.575GHz)
Typical characteristics of VSWR
●AF 216M245001
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
−X
+X
440MHz
+Z
−Y
+Y
−Y
Vertical
polarization
Vertical
polarization
Horizontal
polarization
−Z
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@2.45GHz)
Typical characteristics of VSWR
●AH 316M245001
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
+X
Bandwidth:
Bandwidth:
more 190MHz
than 170MHz
(VSWR: less than 2)
−X
−Y
+Z
+Y
Vertical
polarization
Vertical
polarization
2.0
2.5
Typical characteristics of VSWR
3.0
−Z
Horizontal
polarization
−Y
+X
Horizontal
polarization
Typical characteristics of radiation pattern(@2.45GHz)
* This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipantenna01_e-01
1
149
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
Typical Characteristics on Taiyo Yuden evaluation board
●AH 083F245001
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
+X
Bandwidth:150MHz
2
−X
+Z
−Y
+Y
−Y
Vertical
polarization
Vertical
polarization
Horizontal
polarization
−Z
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@2.45GHz)
Typical characteristics of VSWR
●AH 104F2450S1
ZX-Plane
+Z
+X
XY-Plane
+X
−X
−Z
+Y
+X
300MHz
−X
+Y
−Y
+Z
−Y
Vertical
polarization
Vertical
polarization
Horizontal
polarization
−Z
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@2.45GHz)
Typical characteristics of VSWR
●AH 122F245001
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
+X
150MHz
2
−X
+Y
−Y
+Z
−Y
Vertical
polarization
Vertical
polarization
Horizontal
polarization
−Z
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@2.45GHz)
Typical characteristics of VSWR
●AH 104N2450D1
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
−X
+X
Bandwidth:500MHz
−Y
+Z
−Y
+Y
Vertical
polarization
Vertical
polarization
Horizontal
polarization
−Z
Typical characteristics of VSWR(2GHz band)
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@2.45GHz)
ZX-Plane
+Z
+X
XY-Plane
+X
−X
−Z
+Y
+X
Bandwidth:1200MHz
−X
+Z
−Y
−Y
+Y
Vertical
polarization
Vertical
polarization
4.9
5.4
5.9
Typical characteristics of VSWR(5GHz band)
−Z
Horizontal
polarization
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@5.25GHz)
* This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
150
1
chipantenna01_e-01
■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS
Typical Characteristics on Taiyo Yuden evaluation board
●AH 086M555001
ZX-Plane
+X
+Z
XY-Plane
+X
−X
−Z
+Y
−X
+X
+Z
−Y
+Y
−Y
Vertical
polarization
2
3
4
5
6
7
8
9
10
Vertical
polarization
Horizontal
polarization
−Z
Horizontal
polarization
+X
Typical characteristics of radiation pattern(@3.96GHz)
Typical characteristics of VSWR
●AH 086M555003
+Z
+X
XY-Plane
+X
−X
−Z
+Y
−X +Z
+X
−Y
+Y
Vertical
polarization
Vertical
polarization
2
3
4
5
6
7
8
9
10
−Z
Typical characteristics of VSWR
Horizontal
polarization
−Y
+X
Typical characteristics of radiation pattern(@3.96GHz)
Horizontal
polarization
HIGH FREQUENCY DIELECTRIC COMPONENT
ZX-Plane
* This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipantenna01_e-01
1
151
■ PACKAGING
①Minimum Quantity
④Leader and Blank Portion
Standard Quantity (pcs)
Embossed Tape
Type
AF216M, AF816M, AF116M, AH104F,
AH122F, AH104N
AH316M
AH083F, AH086M
2000
3000
1000
②Tape Material
⑤Reel size
Type
③Taping Dimensions
◦Embossed Tape
A
B
W
T
AF216M
AH316M
178±2.0
(7.0±0.08)
50 min.
(2.0 min.)
10.0±1.5
(0.394±0.06)
3.0 max.
(0.12 max.)
AF816M
AH083F
178±2.0
(7.0±0.08)
50 min.
(2.0 min.)
17.0±1.0
(0.67±0.04)
2.5 max.
(0.1 max.)
AF116M, AH104F
AH122F, AH104N
330±2.0
(13.0±0.08)
100±1.0
(3.94±0.04)
25.5±1.0
(1.0±0.04)
3.0 max.
(0.12 max.)
AH086M
330 ± 2.0
(13.0±0.08)
100 ± 1.0
(3.94±0.04)
17.0 ± 1.0
(0.67±0.04)
2.5 max.
(0.1 max.)
Unit : mm (inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1~0.7N in the direction of the arrow as
illustrated below.
A
B
C
D
Insertion Pitch
F
AF216M
1.85±0.2
(0.073±0.008)
2.75±0.2
(0.108±0.008)
8±0.2
(0.315±0.008)
3.5±0.1
(0.138±0.004)
4±0.1
(0.157±0.004)
1.95
(0.077)
0.3
(0.012)
AF816M
1.95±0.2
(0.077±0.008)
8.4±0.2
(0.331±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.296±0.004)
4±0.1
(0.157±0.004)
2.05
(0.081)
0.35
(0.014)
AF116M
1.95±0.2
(0.077±0.008)
11.4±0.2
(0.449±0.008)
24±0.3
(0.945±0.012)
11.5±0.1
(0.453±0.004)
4±0.1
(0.157±0.004)
2.05
(0.081)
0.35
(0.014)
AH316M
1.9±0.2
(0.075±0.008)
3.5±0.2
(0.138±0.008)
8±0.2
(0.315±0.012)
3.5±0.1
(0.138±0.004)
4±0.1
(0.157±0.004)
0.85
(0.033)
0.3
(0.012)
AH083F
3.35±0.2
(0.132±0.008)
8.35±0.2
(0.329±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.295±0.004)
8±0.1
(0.315±0.004)
1.55
(0.061)
0.3
(0.012)
AH104F,
AH104N
4.35±0.2
(0.171±0.008)
10.35±0.2
(0.407±0.008)
24±0.3
(0.945±0.012)
11.5±0.1
(0.435±0.004)
8±0.1
(0.315±0.004)
1.55
(0.061)
0.3
(0.012)
AH122F
2.3±0.2
(0.091±0.008)
12.3±0.2
(0.484±0.008)
24±0.3
(0.945±0.012)
11.5±0.1
(0.435±0.004)
4±0.1
(0.157±0.004)
1.45
(0.057)
0.35
(0.014)
AH086M
6.25±0.2
(0.246±0.008)
8.26±0.2
(0.325±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.296±0.004)
12±0.1
(0.473±0.004)
1.3
(0.051)
0.3
(0.012)
Type
Chip Cavity
Tape Widthness
Tape Thickness MAX.
K
T
Unit : mm (inch)
* This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipan_reli_e-01
1
chipan_reli-PRP1
■ RELIABILITY DATA
1. Operating Temperature Range
Specified Value
2. Storage Temperature Range
Specified Value
【Test Methods and Remarks】
※with being taped, ー20~+35℃
-20~+80℃
-40~+85℃
3. Solderability
Specified Value
At least 90% of Terminal surface immersed is covered by new solder.
【Test Methods and Remarks】
Solder temperature : 230±5℃
Duration
: 3±1 sec.
Preconditioning
: Preheating at 150℃ after immersion into flux.
4. Thermal Shock
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery after 10 times of 30min.immersion alternately at ー40℃ and 85℃ of temperature,followed by evaluating electrical characteristics.
5. High Temperature Storage Test
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical characteristics.
6. Low Temperature Storage Test
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with ー40℃ of temperature, followed by evaluating electrical characteristics.
7. Humidity Storage Test
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90~95% relative humidity followed by evaluating electrical characteristics.
8. Resistance to Reflow
Specified Value
Shall satisfy required VSWR value of individual specifications for each item.
【Test Methods and Remarks】
Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics.
* This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipan_reli-PRP2
1
chipan_reli_e-01
■ PRECAUTIONS
1. PCB Design
◆Land pattern design
Please do not arrange the surface and inside layer pattern near the antenna mounting area.
◆Land pattern design
Land pattern dimension examples and recommended antenna land pattern
Precautions
AF216M/816M/116M
AH316M
Type
AF216M
AF816M
AF116M
L
2.5
8
11
Dimensions
P
1.5
7
10
AH083F
AH104F
AH104N
AH086M
a
3
5
3
Unit : mm
AH122F
Technical
Considerations
2. Soldering
◆Conditions of Reflow soldering (for reference)
・Pb Free Reflow Profile
・Reflow Profilev
Technical
Considerations
※ Components should be preheated to within
100 to 130℃ from soldering temperature.
※ Assured to be reflow soldering for 2 times.
Note : The above profiles are the maximum allowable soldering condition, therefore these
profiles are not always recommended.
3. Storage Conditions
◆Storage conditions
1. The Products should not be used in the following environments :
・exposure to special gases such as (C12, NH3, SOx, NOx)
・exposure to volatile gas or inflammable gas
・exposure to a lot of dust
・exposure to water or condensation
Precautions
・exposure to direct sanlight or freezing
2. The Products should be kept in the following conditions :
・Temperature : ー10~+40℃
・Humidity
: 15~85%RH
3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage.
■ Please contact our offices for further details of specifications.
All of the standard values listed here are subject to change without notice due to technical improvements.
Therefore, please check the specifications carefully before use.
* This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
chipan_reli-PRP3
1
chipan_reli_e-01
Similar pages