MC13-SERIES 䡵 Features (1) 2 mounting options : MC13** Screw mounting type MC13**DIN Din rail mounting type (2) Worldwide compliance : Voltage rating 3 phase AC500V, 10, 20, 30A (3) Safe design : Terminal with cover, Low leakage current (4) Environmental compliance : Lead free soldering 䡵 Safety standard EN133200 UL1283 CSA Std. C22. 2 No. 8 EN133200 䡵 Specifications 12 Vibration 13 Weight MC13** MC13**DIN MC1306 MC1306DIN MC1310 MC1320 MC1330 MC1310DIN MC1320DIN MC1330DIN 500V (50/60Hz) 6A 10A 20A 30A 2000V (100mA) at 25°C, 70% RH 100MΩ min at 25°C, 70% RH 5.0mA max 90mΩ max 68mΩ max 23mΩ max 11mΩ max 30°C max -25°C ~ +85°C 30% ~ 95% RH (No Dewdrop) -40°C ~ +85°C 10% ~ 95% RH (No Dewdrop) At no operating 10~55~10Hz, Amplitude (Sweep for 1min) 0.825mm constant (Maximum 49.0m/s 2)X,Y,Z 1hour each At no operating 55~250~55Hz, Acceleration (Sweep for 1min) 19.6m/s 2, X,Y,Z 1hour each At no operating 10~55~10Hz, Acceleration (Sweep for 1min) 9.8m/s 2, X,Y,Z 1hour each 600g =50°C For Ta>50°C derate according to the derating curve shown on the right. (Note) : Value for Ta < 䡵 Derating Current (%) 䡵 Circuit Temperature (°C) 䡵 Terminal Explanation 䢇 Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. 䢇 Contact us about delivery before ordering. 163 EMI Noise filter Model STD type Items DIN type 1 Rated Voltage (AC) 2 Rated Current (*1) 3 Test Voltage (terminals to base plate, 1min AC) 4 Isolation Resistance (terminals to base plate, 500VDC) 5 Leakage Current 500V,60Hz 6 DC Resistance (three lines) 7 Temperature Rise 8 Operating Temperature 9 Operating Humidity 10 Storage Temperature 11 Storage Humidity MC13-SERIES 䡵 MC13** (Unit: mm) EMI Noise filter 䡵 MC13**DIN (Unit: mm) 䡵 MC13**DIN explanation *Mounting *Ground MC13**DIN could be mounted on 35mm wide (TS35 type) Din-rail.For mounting, put the part (A) of the unit over the top hat rail and push forward like (B), so that the rail stopper is firmly held on the Din-rail. For unmounting, put a screw driver int the part (C) and lift it up to remove the unit. A B C 164 Do not earth whth Din-rail. Earth directly from the ground terminal of MC13**DIN. MC13-SERIES CHARACTERISTICS 䡵 Attenuation Characteristic (typical) MC1306 MC1310 EMI Noise filter 165 MC13-SERIES CHARACTERISTICS 䡵 Attenuation Characteristic (typical) EMI Noise filter MC1320 166 MC1330