BXY44 HiRel Silicon PIN Diode • HiRel Discrete and Microwave Semiconductor • Current controlled RF resistor for RF attenuators and switches • High reverse voltage • Hermetically sealed microwave package • Space Qualified ESA/SCC Detail Spec. No.: 5513/030 Type Variant No.s 04 to 07 T T1 T2 FP ESD: Electrostatic discharge sensitive device, observe handling precautions! Type BXY44-T (ql) Marking - Ordering Code see below Pin Configuration Package 1 2 T BXY44-T1 (ql) 1 2 T1 BXY44-T2 (ql) 1 2 T2 BXY44-FP (ql) 1 1' FP 2 (ql) Quality Level: P: Professional Quality, Ordering Code: Q62702X148 H: High Rel Quality, Ordering Code: on request S: Space Quality, Ordering Code: on request ES: ESA Space Quality, Ordering Code: Q62702X162 (see order instructions for ordering example) Semiconductor Group 1 of 6 Draft B, September 99 BXY44 Maximum Ratings Parameter Symbol Reverse Voltage VR 200 V IF 400 mA Power Dissipation Ptot 500 mW Operating Temperature Range Top -55 to +150 °C Storage Temperature Range Tstg -65 to +175 °C Soldering Temperature 2) Tsol +235 °C Junction Temperature Tj 150 °C Thermal Resistance Junction-Case Rth(j-c) Forward Current 1) Values Unit K/W 110 BXY44-T 140 BXY44-T1 110 BXY44-T2 110 BXY44-FP Notes.: 1.) For BXY44-T; -T2, -FP: At TCASE = 95 °C. For TCASE > 95 °C derating is required. For BXY44-T1: At TCASE = 80 °C. For TCASE > 80 °C derating is required. 2.) During 5 sec. maximum. The same terminal shall not be resoldered until 5 minutes have elapsed. Electrical Characteristics at TA=25°C; unless otherwise specified Parameter Symbol Values Unit min. typ. max. IR1 - - 100 nA IR2 - - 5 nA VF - 1,0 1,05 V DC Characteristics Reverse Current 1 VR1=200V Reverse Current 2 VR2=100V Forward Voltage IF=100mA Semiconductor Group 2 of 6 Draft B, September 99 BXY44 Electrical Characteristics (continued) Parameter Symbol Values min. typ. Unit max. AC Characteristics Total Capacitance pF CT VR=50V; f=1MHz BXY44-T, -T1, -T2 - 0,20 0,35 BXY44-FP - 0,50 0,75 Forward Resistance 1 Ω RF1 f=100MHz, IF1=10µA BXY44-T, -T1, -T2 800 900 1300 BXY44-FP 700 900 1200 Forward Resistance 2 Ω RF2 f=100MHz, IF2=1mA BXY44-T, -T1, -T2 12 16 28 BXY44-FP 11 20 27 Forward Resistance 3 Ω RF3 f=100MHz, IF3=10mA BXY44-T, -T1, -T2 2,0 3,0 5,0 BXY44-FP 2,0 3,8 5,0 300 800 - Minority Carrier Lifetime τL ns IF=10mA, IR=6mA, IR=3mA Semiconductor Group 3 of 6 Draft B, September 99 BXY44 Order Instructions: Full type variant including package variant and quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: Q.......... BXY44- (x) (ql) (x): Package Variant (ql): Quality Level Ordering Example: Ordering Code: Q62702X162 BXY44-T1 ES For BXY44 in T1 Package; ESA Space Quality Level Further Informations: See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/products/discrete/hirel.htm - HiRel Discrete and Microwave Semiconductors www.infineon.com/products/discrete/hirel.htm Please contact also our marketing division : Tel.: Fax.: ++89 234 24480 ++89 234 28438 e-mail: Address: [email protected] Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich Semiconductor Group 4 of 6 Draft B, September 99 BXY44 T Package B X1 A C Y1 Symbol Y2 A B C 2 1 Millimetre min max 1,30 1,45 1,15 1,35 0,40 T1 Package X1 B Y1 A Y2 Symbol C A B C D E F G H 2 1 D F E H G G Millimetre min max 1,30 1,45 1,15 1,35 0,40 0,10 0,50 0,30 0,06 0,10 5,50 0,40 0,60 T2 Package X1 Y2 Y1 B A Symbol 2 1 C ∅A ∅B C D D Semiconductor Group 5 of 6 Millimetre min max 1,30 1,45 2,0 2,2 0,60 1,25 0,08 0,20 Draft B, September 99 BXY44 FP Package Y1 L B B1 Symbol L X1 d B B1 D D1 d d1 F L D D1 Y2 2 1 1' d1 F n.c. Millimetre min max 3,10 3,55 3,00 3,30 1,30 1,70 0,55 0,65 0,10 0,15 0,25 0,40 2,40 2,60 5,50 - n.c. Published by Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich. Infineon Technologies AG 1998. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives woldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office, Semiconductor Group. Infineon Technologies Semiconductors is a certified CECC and QS9000 manufacturer (this includes ISO 9000). Semiconductor Group 6 of 6 Draft B, September 99