EC13 Series EC13 • RoHS Compliant (Pb-free) • HCMOS/TTL output • 3.3V supply voltage • 14 pin DIP package • Stability to ±20ppm • Custom lead length, gull wing options available H 5.08 W 20.8 L 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 0.250MHz to 125.000MHz Operating Temperature Range 0°C to 70°C -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) Input Current Frequency Tolerance / Stability 3.3VDC ±0.3VDC 0.250MHz to 24.000MHz 10mA Maximum 24.001MHz to 70.000MHz 25mA Maximum 70.001MHz to 125.000MHz 45mA Maximum Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm, or Frequency Stability over the Operating Temperature Range, ±20ppm Maximum (0°C to 70°C Only) Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration Output Voltage Logic High (VOH) w/ TTL Load 2.4VDC Minimum w/ HCMOS Load 2.7VDC Minimum w/ TTL Load 0.4VDC Maximum w/ HCMOS Load 0.5VDC Maximum 10% to 90% of Waveform w/HCMOS Load or 10 nSeconds Max. < 24.000MHz 0.4VDC to 2.4VDC w/TTL Load 10 nSeconds Max. < 24.000MHz 10% to 90% of Waveform w/HCMOS Load 6 nSeconds Max. 24.000MHz to 70.000MHz 10% to 90% of Waveform w/HCMOS Load 4 nSeconds Max. 70.001MHz to 125.000MHz Duty Cycle at 50% of Waveform 50 ±10(%) (Standard) or 50 ±5(%) (Optional) Load Drive Capability < 24.000MHz 2TTL or 15pF HCMOS Load > 24.000MHz 15pF HCMOS Load VIH :No Connection Enables Output VIH :>2.2VDC Enables Output VIL :<0.8VDC Disables Output: High Impedance Output Voltage Logic Low (VOL) Rise Time / Fall Time Tri-State Input Voltage Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EC13 14 pin DIP 3.3V OS20 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 08/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC13 00 ET T TS - 50.000M - G FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum, 25=±25ppm Maximum 20=±20ppm Maximum AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length G=Full Size Gull Wing OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard), ET=-40°C to 85°C FREQUENCY OUTPUT CONTROL FUNCTION Blank = No Connect TS=Tri-State Enable High DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS Pin 1: Tri-State or N o Connect Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Line 1: ECLIPTEK Line 2: EC13 TS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Output Control Function TS = Tri-State Enable High Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Series Designator Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER ECLIPTEK CORP. CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE OSCILLATOR EC13 14 pin DIP 3.3V OS20 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EC13 Series EC13 • RoHS Compliant (Pb-free) • HCMOS/TTL output • 3.3V supply voltage • 8 pin DIP package • Stability to ±20ppm • Custom lead length, gull wing options available H 5.6 L 13.2 W 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 0.250MHz to 125.000MHz Operating Temperature Range 0°C to 70°C -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 3.3VDC ±0.3VDC Input Current Frequency Tolerance / Stability 0.250MHz to 24.000MHz 10mA Maximum 24.001MHz to 70.000MHz 25mA Maximum 70.001MHz to 125.000MHz 45mA Maximum Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm, or Frequency Stability over the Operating Temperature Range, ±20ppm Maximum (0°C to 70°C Only) Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration Output Voltage Logic High (VOH) w/ TTL Load 2.4VDC Minimum w/ HCMOS Load 2.7VDC Minimum w/ TTL Load 0.4VDC Maximum w/ HCMOS Load 0.5VDC Maximum 10% to 90% of Waveform w/HCMOS Load or 10 nSeconds Max. < 24.000MHz 0.4VDC to 2.4VDC w/TTL Load 10 nSeconds Max. < 24.000MHz 10% to 90% of Waveform w/HCMOS Load 6 nSeconds Max. 24.000MHz to 70.000MHz 10% to 90% of Waveform w/HCMOS Load 4 nSeconds Max. 70.001MHz to 125.000MHz Duty Cycle at 50% of Waveform 50 ±10(%) (Standard) or 50 ±5(%) (Optional) Load Drive Capability < 24.000MHz 2TTL or 15pF HCMOS Load > 24.000MHz 15pF HCMOS Load VIH :No Connection Enables Output VIH :>2.2VDC Enables Output VIL :<0.8VDC Disables Output: High Impedance Output Voltage Logic Low (VOL) Rise Time / Fall Time Tri-State Input Voltage Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EC13 8 pin DIP 3.3V OS21 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 08/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC13 00 HS ET T TS - 50.000M - G TR PACKAGING OPTIONS TR= Tape & Reel (only offered with Half Size G and Half Size G2 Options) FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum, 25=±25ppm Maximum 20=±20ppm Maximum AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length G=Half Size Gull Wing G2=Half Size Gull Wing PACKAGE HS=Half Size 8 Pin DIP OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard), ET=-40°C to 85°C FREQUENCY OUTPUT CONTROL FUNCTION Blank=None (No Connection on Pin 1) TS=Tri-State Enable High DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) MECHANICAL DIMENSIONS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For “G” Option (2) For “G2” Option Ø Ø Pin 1: No Connect or Tri-State Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EC13 TS Output Control Function Blank = None (No Connection on Pin 1) TS = Tri-State Enable High Series Designator 250 Pieces Per Reel Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC13 8 pin DIP 3.3V OS21 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.