Agamem Microelectronics Inc. PRELIMINARY AA3414 SINGLE-SUPPLY DUAL HIGH CURRENT OPERATIONAL AMPLIFIER ■ DESCRIPTION AA3414 is a high output current, high output voltage swing and high gain dual operational amplifier capable of driving 70mA. The IC is available in 8-pin TSSOP (AA3414A) and 8-pin SOP (AA3414S) package. ■ FEATURES • Bipolar Technology • Provided in TSSOP-8, SOP-8 package • Single Power Supply • Wide Operating Voltage from 3V ~ 15V • Capable of driving 70mA • 1.0V/us Slew Rate ■ APPLICATIONS • Audio • Digital Photo Frame • Portable Digitals ■ BLOCK DIAGRAM ©Copyright Agamem Microelectronics Inc. 1 www.agamem.com.tw 2008/5/28 AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTS OR CIRCUIT DESRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. AA3414 Agamem Microelectronics Inc. PRELIMINARY SINGLE-SUPPLY DUAL HIGH CURRENT OPERATIONAL AMPLIFIER ■ PIN DESCRIPTIONS PIN NO. 1 PIN NAME AO PIN FUNCTION Amplifier A Output 2 A- Amplifier B Invert Input 3 A+ Amplifier A Non-Invert Input 4 GND 5 B+ Amplifier B Non-Invert Input 6 B- Amplifier B Invert Input 7 BO Amplifier B Output 8 V+ Wide Operating Voltage from 3V to 15V Ground ■ ABSOLUTE MAXIMUM RATINGS TA=25℃ PARAMETER SYMBOL RATING UNIT VCC -0.3 ~ +18(or±9V) V Operating Ambient Temperature TA -40 ~ +85 ℃ Storage Temperature TS -40 ~ +125 ℃ Supply Voltage NOTE: Stress above those listed under “Absolute Maximum Rating” may cause device permanent damage. This stress-rating only factor and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for an extending period of time may affect the reliability of the device. ©Copyright Agamem Microelectronics Inc. 2 www.agamem.com.tw 2008/5/28 AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTS OR CIRCUIT DESRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. AA3414 Agamem Microelectronics Inc. PRELIMINARY SINGLE-SUPPLY DUAL HIGH CURRENT OPERATIONAL AMPLIFIER ■ ELECTRICAL CHARACTERISTICS TA = 25°C, V+=8.6V SYMBOL PARAMETER MIN LIMITS TYP MAX -- -- 15 V CONDITIONS UNIT V+ Operating Voltage Icc Supply Current 3 4 5 mA GB Gain Bandwidth -- 1.3 -- MHz VIO Input Offset Voltage -- 2 5 mV IIO Input Offset Current -- 5 100 nA Av Large Signal Voltage Gain 88 100 -- dB V+ - 2 -- -- V RL = ∞ RS = 0 RL = 2KΩ VICM Input Common Voltage Range VOM1 Maximum Output Voltage Swing 1 RL ≥ 2KΩ, V+ = 5V 3.5 -- -- V VOM2 Maximum Output Voltage Swing 2 IO = 70mA, V+ = 5V 3.2 -- -- V CMR Common Mode Rejection Ratio 80 90 -- dB SVR Supply Voltage Rejection Ratio 80 90 -- dB Slew Rate -- 1.0 -- V/us SR ■ ORDERING INFORMATION ORDER NO. PACKAGE PACKING ONE REEL Q’TY AA3414A TSSOP 8L Tape & Reel 3,000ea AA3414S SOP 8L Tape & Reel 3,000ea ©Copyright Agamem Microelectronics Inc. 3 MARK CHART 3414 XXXX A 3414 XXXX S www.agamem.com.tw 2008/5/28 AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTS OR CIRCUIT DESRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. Agamem Microelectronics Inc. PRELIMINARY AA3414 SINGLE-SUPPLY DUAL HIGH CURRENT OPERATIONAL AMPLIFIER ■ PACKAGE DIMENSIONS TSSOP 8L SYMBOLS DIMENSIONS IN MILLIMETERS DIMENSIONS IN INCHES MIN NOM MAX A --- --- 1.20 MIN --- NOM --- MAX 0.048 A1 0.05 --- 0.15 0.002 --- 0.006 0.031 0.039 0.041 A2 0.80 1.00 1.05 b 0.19 --- 0.30 0.007 --- 0.012 C 0.09 --- 0.20 0.004 --- 0.008 0.122 D 2.90 3.00 3.10 0.114 0.118 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e --- 0.65 --- --- 0.026 --- 0.024 0.030 0.004 L 0.45 0.60 0.75 0.018 y --- --- 0.10 --- --- θ 0° --- 8° 0° --- ©Copyright Agamem Microelectronics Inc. 8° 4 NOTES: 1. Package body sizes exclude mold flash protrusions or gate burrs 2. Tolerance ± 0.1 ㎜ (4 mil) unless otherwise specified 3. Coplanarity:0.1 ㎜ 4. Controlling dimension is millimeter whereas converted inch dimensions are not necessarily exact 5. Followed from jedec mo-153 www.agamem.com.tw 2008/5/28 AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTS OR CIRCUIT DESRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. AA3414 Agamem Microelectronics Inc. PRELIMINARY SINGLE-SUPPLY DUAL HIGH CURRENT OPERATIONAL AMPLIFIER SOP 8L SYMBOLS DIMENSIONS IN MILLIMETERS DIMENSIONS IN INCHES MIN NOM MAX A 1.35 1.60 1.75 MIN 0.053 NOM 0.063 MAX 0.069 NOTES: A1 0.10 --- 0.25 A2 --- 1.45 --- 0.004 --- 0.010 1. --- 0.057 --- b 0.33 --- 0.51 0.013 --- 0.020 C 0.19 --- 0.25 0.007 --- 0.010 D 4.80 --- 5.00 0.189 --- 0.197 E 3.80 --- 4.00 0.150 --- 0.157 3. Coplanarity: 0.1 mm e --- 1.27 --- --- 0.050 --- 4. Controlling dimension is H 5.80 --- 6.20 0.228 --- 0.244 millimeter converted inch L 0.40 --- 1.27 0.016 --- 0.050 dimensions are not necessarily y --- --- 0.10 --- --- 0.004 θ 0° --- 8° 0° ©Copyright Agamem Microelectronics Inc. --- moldflash protrusions or gate burns. 2. 5 Tolerance ± 0.1 ㎜ (4 mil) unless otherwise specified exact 5. 8° Package body sizes exclude Followed from JEDEC MS-012 www.agamem.com.tw 2008/5/28 AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTS OR CIRCUIT DESRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.