Miniature Aluminum Electrolytic Capacitors NRZX Series +125°C WIDE TEMPERATURE RANGE, RADIAL LEADS, POLARIZED FEATURES • -40°C ~ +125°C EXTENDED OPERATING TEMPERATURE RANGE • LOW IMPEDANCE AND HIGH RIPPLE CURRENT AT HIGH FREQUENCY • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current @ 20°C Max. Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. +125°C 10 ~ 35Vdc 22 ~ 2,200μF -40 ~ +125°C ±20% (M) 0.01CV or 3μA, whichever is greater after 2 minutes W.V. (Vdc) 10 16 25 35 S.V. (Vdc) 13 20 32 44 C < 1,000μF C = 1,200μF C = 1,500μF C = 2,200μF Z-25°C/Z+20°C Z-40°C/Z+20°C Case Diameter Life Hours Capacitance Change Tan δ Leakage Current 0.20 0.16 0.14 0.12 0.20 0.20 0.16 0.22 3 2 2 2 6 4 3 3 φD < 6.3 φD = 8 φD = 10 φD = 12.5 1,000hrs 2,000hrs 3,000hrs 4,000hrs Within ±30% of intial measured value Less than 300% of specified value Less than specified vlaue STANDARD PRODUCT AND CASE SIZE D φxL (mm) Cap. (μF) Code 22 33 47 56 100 120 150 180 220 330 470 560 101 121 151 181 10 5x11 6.3x11 - 220 221 - 270 271 - 330 331 8x11.5 470 471 560 561 680 681 820 1000 1200 1500 2200 821 102 122 152 222 8x16 10x12.5 8x20 10x16 10x20 10x23 12.5x20 12.5x25 Working Voltage (VDC) 16 25 5x11 5x11 6.3x11 6.3x11 8x11.5 8x16 8x11.5 10x12.5 8x20 8x16 10x16 10x12.5 8x20 10x20 10x16 10x23 35 5x11 8x12.5 6.3x11 8x11.5 8x16 10x12.5 8x20 10x16 DIAMETER AND LEADSPACE (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Spacing (F) Dim. α 5.0 0.5 2.0 6.3 0.5 2.5 8.0 0.6 3.5 10 0.6 5.0 0.5 12.5 0.8 5.0 1.0 β = L < 16mm=1.5mm, L > 20mm=2.0mm DIMENSIONS (mm) Polarity Marking Sleeve + dφ ± 0.05 10x20 F ± 0.5 - 10x23 12.5x20 12.5x25 10x20 12.5x20 - 10x23 12.5x20 12.5x25 - 12.5x25 - - L + β max. 15mm Min. 4mm Min. Dφ ± α Drawing is representative of parts as supplied in bulk or straight lead format, please see taping specification for details on taped format packaging. PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Miniature Aluminum Electrolytic Capacitors NRZX Series STANDARD VALUES, SPECIFICATIONS AND CASE SIZES (mm) Cap. (μF) Part Number W.V. (Vdc) Dissipation Factor +20°C/120Hz NRZX560M10V5X11F 56 10 0.2 NRZX121M10V6.3x11F 120 10 0.2 NRZX331M10V8X11.5F 330 10 0.2 NRZX471M10V8X16F 470 10 0.2 NRZX471M10V10X12.5F 470 10 0.2 NRZX681M10V8X20F 680 10 0.2 NRZX681M10V10X16F 680 10 0.2 NRZX102M10V10X20F 1000 10 0.2 NRZX122M10V10X23F 1200 10 0.2 NRZX152M10V12.5X20F 1500 10 0.2 NRZX222M10V12.5X25F 2200 10 0.22 NRZX470M16V5X11F 47 16 0.16 NRZX101M16V6.3X11F 100 16 0.16 NRZX221M16V8X11.5F 220 16 0.16 NRZX331M16V8X16F 330 16 0.16 NRZX331M16V10X12.5F 330 16 0.16 NRZX471M16V8X20F 470 16 0.16 NRZX471M16V10X16F 470 16 0.16 NRZX681M16V10X20F 680 16 0.16 NRZX821M16V10X23F 820 16 0.16 NRZX102M16V12.5X20F 1000 16 0.16 NRZX152M16V12.5X25F 1500 16 0.16 NRZX330M25V5X11F 33 25 0.14 NRZX560M25V6.3X11F 56 25 0.14 NRZX151M25V8X11.5F 150 25 0.14 NRZX221M25V8X16F 220 25 0.14 NRZX221M25V10X12.5F 220 25 0.14 NRZX271M25V8X20F 270 25 0.14 NRZX331M25V10X16F 330 25 0.14 NRZX471M25V10X20F 470 25 0.14 NRZX561M25V10X23F 560 25 0.14 NRZX681M25V12.5X20F 680 25 0.14 NRZX102M25V12.5X25F 1000 25 0.14 NRZX220M35V5X11F 22 35 0.12 NRZX560M35V6.3X11F 56 35 0.12 NRZX101M35V8X11.5F 100 35 0.12 NRZX121M35V8X16F 120 35 0.12 NRZX151M35V10X12.5F 150 35 0.12 NRZX181M35V8X20F 180 35 0.12 NRZX221M35V10X16F 220 35 0.12 NRZX271M35V10X20F 270 35 0.12 NRZX331M35V10X23F 330 35 0.12 NRZX471M35V12.5X20F 470 35 0.12 NRZX561M35V12.5X25F 560 35 0.12 For Automotive Applications see part number system Maximum Leakage Current after 2 minutes (μA) Ripple Current Rating +125°C/100KHz (mA) 16.8 36 99 141 141 204 204 300 360 450 660 22.6 48 105.6 158.4 158.4 225.6 225.6 326.4 393.6 480 720 24.8 42 112.5 165 165 202.5 247.5 352.5 420 510 750 23.1 58.8 105 126 157.5 189 231 283.5 346.5 493.5 588 250 405 760 995 1030 1250 1430 1500 1620 1720 1900 250 405 760 995 1030 1250 1430 1500 1620 1720 1900 250 405 760 995 1030 1250 1430 1500 1620 1720 1900 250 405 760 995 1030 1250 1430 1500 1620 1720 1900 Max. ESR (Ω) 100KHz +20°C 0.400 0.170 0.094 0.073 0.069 0.054 0.050 0.030 0.029 0.028 0.024 0.400 0.170 0.094 0.073 0.069 0.054 0.050 0.030 0.029 0.028 0.024 0.400 0.170 0.094 0.073 0.069 0.054 0.050 0.030 0.029 0.028 0.024 0.400 0.170 0.094 0.073 0.069 0.054 0.050 0.030 0.029 0.028 0.024 100KHz -10°C 1.30 0.53 0.29 0.23 0.21 0.17 0.16 0.09 0.086 0.069 0.059 1.30 0.53 0.29 0.23 0.21 0.17 0.16 0.09 0.086 0.069 0.059 1.30 0.53 0.29 0.23 0.21 0.17 0.16 0.09 0.086 0.069 0.059 1.30 0.53 0.29 0.23 0.21 0.17 0.16 0.09 0.086 0.069 0.059 Load Life @+125°C (Hours) 1,000 1,000 2,000 2,000 3,000 3,000 3,000 3,000 3,000 4,000 4,000 1,000 1,000 2,000 2,000 3,000 3,000 3,000 3,000 3,000 4,000 4,000 1,000 1,000 2,000 2,000 3,000 3,000 3,000 3,000 3,000 4,000 4,000 1,000 1,000 2,000 2,000 3,000 3,000 3,000 3,000 3,000 4,000 4,000 RIPPLE CURRENT CORRECTION FACTOR Frequency (Hz) 22 ~ 33μF 39 ~ 100μF 120 ~ 270μF 330 ~ 680μF 820 ~ 1800μF 2200μF 2 120 0.20 0.25 0.35 0.45 0.50 0.55 1K 0.50 0.60 0.70 0.75 0.80 0.85 10K 0.80 0.90 0.92 0.95 0.96 0.98 100K 1.00 1.00 1.00 1.00 1.00 1.00 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Miniature Aluminum Electrolytic Capacitors PART NUMBERING SYSTEM NRZX 471 M 16V 10X16 TB Y F . Series NRZX Series RoHS Compliant TB = Tape & Box* Case Size (DφxL) Working Voltage (Vdc) Tolerance Code (M=20%) Capacitance Code: First 2 characters significant, third character is multiplier *see tape specification for details Optional: For automotive equipment, sourced to special production and inspection at TS-16949 certified production site NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Miniature Aluminum Electrolytic Capacitors NRZX Series STANDARD RADIAL TAPING (5mm LEAD SPACING, FORMED LEADS) TB Taping Dimensions (mm) Case Dia. 5 (Dφ) Case Size 5x11 dφ ±0.05 0.5 H ±0.75 F +0.8 ~ -0.2 P P0 18.5 6.3 8 6.3x11 0.5 8x11.5 0.6 18.5 5.0 -02 ~ +0.8 12.7 ±1.0 12.7 ±0.2 20.0 P1 3.85 ±0.5 (at end of tape) P 6.35 ±1.0 2 W 18.0 ±0.5 W0 11.5 min. W1 9.0 ±0.5 W2 0 ~ 2.5 H0 I D φ 0 16.0 ±0.5 1.0 max. 4.0 ±0.2 Δh t P P2 ∅D w2 P1 F ∅d W w0 w H0 H 1.0 Δh S ∅D 0 P0 1max 0 ±1.0 (at top of can) 0.7 ±0.2 (not including lead) t STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB Taping Dimensions (mm) Case Dia. (Dφ) Case Size Dim. dφ ±0.05 H ±0.75 F +0.8 ~ -0.2 P ±1.0 P0 P P 1 2 W W 0 10 12.5 All All 0.6 19.0 5.0 12.7* 0.6 19.0 5.0 25.4* 3.85 6.35 ±1.0 18.0 ±0.5 11.5 min 9.0 ±0.5 W2 0 ~ 2.5 H0 16.0 ±0.5 1.0 max. D 0φ 1max 12.7 ±0.2 W1 I Δh P2 t ∅D w2 4.0 ±0.2 Δh 0 ±1.0 (at top of can) t 0.7 ±0.2 (not including lead) P w P1 F ∅d W1 w0 *Optional Taping Specifications 10mm diameter available with P dim. = 15mm (P/N Suffix: TB15MMP) H 1.0 12.5mm diameter available with P dim. = 15mm, P1= 5.0mm, P0 = 15.0mm & P2 = 7.5mm (P/N Suffix: TB15MMP) P0 S ∅ D0 NOTE: ANODE (+) LEAD FEEDS OFF FIRST. FOR OPTION OF NEGATIVE (_) LEAD FIRST, SPECIFY “TBN”. 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Miniature Aluminum Electrolytic Capacitors NRZX Series SPECIAL STRAIGHT LEAD TAPING TBST* Taping Dimensions (mm) Δh Case Dia. (Dφ) Case Size Dim. dφ ±0.05 6.3 8 6.3x11 8x11.5 0.5 0.6 H ±0.75 18.5 20.0 F +0.8 ~ -0.2 2.5 P ±1.0 1max 3.5 12.7 ±0.2 12.7 ±0.2 P0 5.1 P1 4.6 P2 6.35 ±1.0 W 18.0 ±0.5 W0 11.5 min. W1 9.0 ±0.5 W2 0 ~ 2.5 H0 16.0 ±0.5 I 1.0 max. D0φ P2 t ∅D w2 w 4.0 ±0.2 Δh P P1 F ∅d W1 w0 H 0 ±1.0 (at top of can) t 0.7 ±0.2 (not including lead) * Parts with 4mm diameter are taped with a slight flare in the lead and a 2.0mm lead-space. 1.0 S ∅ D0 P0 *Straight leads will extend from the based of the component to the edge of the carrier. The section of lead below the adhesive tape may be straight or formed. RADIAL TAPED PACKAGING Ammo Box (Tape & Box) TB, TBF1, TBST Size of box and component quantity Ammo Box Dimensions (mm) Scored corner Label - W 5x11 Q'ty per Box (pcs) 2,000 340 255 55 6.3x11 2,000 331 280 48 8x11.5 1,000 335 235 53 8x16, 8x20 500 335 300 53 10x12.5 500 335 190 53 10x16 500 335 300 53 10x20 500 335 300 55 10x23 500 335 300 61 12.5x20 500 335 300 55 12.5x25 500 335 300 61 Case Dia (Dφ) or Case Size ⊕ H L NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com Dim. L Dim. H www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE Dim. W www.SMTmagnetics.com 5