Technical Datasheet DS56 power light source LUXEON Rebel ® Introduction LUXEON® Rebel is an ultracompact, surfacemount, highpower LED that delivers elevated standards for light output, flux density and manufacturability. Offering industryleading flux density, lumens per package and power handling capabilities, LUXEON Rebel enables you to create never before possible lighting applications and: deliver more useable light and higher flux density optimize applications to reduce size and cost tightly pack the LEDs for color mixing applications engineer more robust applications utilize standard FR4 PCB technology simplify manufacturing through the use of surface mount technology. LUXEON Rebel Technology Leadership 150°C Junction Temperature Industry leading lumen perform ance, > 100 lumens in cool white at 350mA 350mA — 1000mA drive current High efficacy, flux density and lumens per package Industry best moisture sensitivity level—JEDEC Level 1 unlimited floor life no need for reconditioning Leadfree reflow solder JEDEC 020c compatible RoHS Compliant Autoclave compliant— JESD22 A102 Industry best lumen maintenance—50,000 hours life at 700 mA with 70% lumen maintenance Electrically isolated thermal pad Available in all colors. Table of Contents Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Visual Appearance of LUXEON Rebel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Flux Characteristics for LUXEON Rebel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Pad Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Typical Light Output Characteristics over Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Typical Relative Luminous Flux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 CoolWhite Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 NeutralWhite Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 WarmWhite Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Color Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 LUXEON Rebel Datasheet DS56 (7/07) 2 Product Nomenclature LUXEON Rebel is tested and binned at 350mA. The part number designation is explained as follows: LXMLABCDEFGH Where: A — designates radiation pattern (value P for Lambertian) B — designates color (see LUXEON Rebel Binning and Labelling section) C — designates color variant (0 for direct colored variants, C for CoolWhite, N for NeutralWhite and W for WarmWhite) D — designates test current (value 1 for 350 mA) E — reserved for future product offerings FGH — minimum luminous flux (lm) or radiometric power (mW) performance Therefore products tested and binned at 350 mA follow the part numbering scheme: LXMLPxx1xxxx Average Lumen Maintenance Characteristics Lifetime for solidstate lighting devices (LEDs) is typically defined in terms of lumen maintenance—the percentage of initial light output remaining after a specified period of time. Philips Lumileds projects that coolwhite, neutralwhite, warmwhite, green, cyan, blue and royalblue LUXEON Rebel products will deliver, on average, 70% lumen maintenance (B50, L70) at 50,000 hours of operation at a forward current of 700 mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. Philips Lumileds projects that red, redorange and amber LUXEON Rebel products will deliver, on average, 70% lumen mainte nance (B50, L70) at 50,000 hours of operation at a forward current of 350 mA. This projection is based on constant current operation with junction temperature maintained at or below 110°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solidstate lighting market. LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). Visual Appearance of LUXEON Rebel All lighted LUXEON Rebel product will provide comparable Lambertian beam performance, suitable for use with commercially available optical systems. Without power, LED die within different reels may appear visually different. Please contact your Philips Lumileds or Future Electronics respresentative for further information. LUXEON Rebel Datasheet DS56 (7/07) 3 Flux Characteristics for LUXEON Rebel—Thermal Pad Temperature = 25°C Table 1. Performance at Test Current Typical Performance at Indicated Current Color Part Number Minimum Luminous Flux (lm) or Radiometric Power (mW) ΦV [1] [3] Test Current (mA) Typical Luminous Flux (lm) or Radiometric Power (mW) ΦV [2] [3] Drive Current (mA) CoolWhite LXMLPWC10040 LXMLPWC10050 LXMLPWC10070 LXMLPWC10080 LXMLPWC10090 LXMLPWC10100 40 50 70 80 90 100 350 350 350 350 350 350 80 95 130 145 160 180 700 700 700 700 700 700 NeutralWhite LXMLPWN10040 LXMLPWN10050 LXMLPWN10070 LXMLPWN10080 40 50 70 80 350 350 350 350 80 95 130 145 700 700 700 700 WarmWhite LXMLPWW10040 LXMLPWW10050 LXMLPWW10060 40 50 60 350 350 350 80 95 110 700 700 700 Green LXMLPM010040 LXMLPM010050 LXMLPM010070 LXMLPM010080 40 50 70 80 350 350 350 350 80 95 130 145 700 700 700 700 Cyan LXMLPE010030 LXMLPE010040 LXMLPE010060 LXMLPE010070 30 40 60 70 350 350 350 350 65 80 110 130 700 700 700 700 Blue LXMLPB010008 LXMLPB010010 LXMLPB010013 LXMLPB010018 LXMLPB010023 8.2 10.7 13.9 18.1 23.5 350 350 350 350 350 19 22 27 38 48 700 700 700 700 700 RoyalBlue LXMLPR010175 LXMLPR010225 LXMLPR010275 175 mW 225 mW 275 mW 350 350 350 325 mW 400 mW 525 mW 700 700 700 Notes for Table 1: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and radiometric power levels will become available in the future. Please consult Philips Lumileds or Future Electronics for more information. LUXEON Rebel Datasheet DS56 (7/07) 4 Flux Characteristics for LUXEON Rebel Continued Thermal Pad Temperature = 25°C Table 1. Continued Performance at Test Current Typical Performance at Indicated Current Color Part Number Minimum Luminous Flux (lm) ΦV [1] [3] Test Current (mA) Typical Luminous Flux (lm) ΦV [2] [3] Drive Current (mA) Red LXMLPD010030 LXMLPD010040 30 40 350 350 65 85 700 700 Red Orange LXMLPH010040 LXMLPH010050 40 50 350 350 85 100 700 700 Amber LXMLPL010023 LXMLPL010030 23.5 30.0 350 350 50 65 700 700 Notes for Table 1: 1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux and power measurements. 2. Typical luminous flux performance is when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and levels will become available in the future. Please consult Philips Lumileds or Future Electronics for more information. LUXEON Rebel Datasheet DS56 (7/07) 5 Optical Characteristics Lambertian LUXEON Rebel at Test Current[1] Thermal Pad Temperature = 25°C Table 2. Dominant Wavelength [2] λD, Peak Wavelength [3] λP, or Color Temperature [4] CCT Min. Typ. Max. Color Typical Spectral Halfwidth (nm) Δλ1/2 [6] Typical Temperature Coefficient of Dominant Wavelength (nm/oC) ΔλD/ ΔTJ Typical Total Included Angle [7] (degrees) θ0.90V Typical Viewing Angle [8] (degrees) 2θ 1/2 CoolWhite 4500 K 6500 K 10,000 K N/A N/A 160 140 NeutralWhite 3500 K 4100 K 4500 K N/A N/A 160 140 WarmWhite 2670 K 3100 K 3500 K N/A N/A 160 140 Green 520 nm 530 nm 550 nm 30 0.05 160 140 Cyan 490 nm 505 nm 520 nm 30 0.04 160 140 Blue 460 nm 470 nm 490 nm 33 0.05 160 140 440 nm 455 nm 460 nm 24 0.04 160 140 RoyalBlue [3] Red 620.5 nm 627 nm 645 nm 29 0.05 160 140 RedOrange 613.5 nm 617 nm 620.5 nm 28 0.08 160 140 Amber 584.5 nm 590 nm 597 nm 28 0.10 160 140 Notes for Table 2: 1. 2. Test current is 350 mA for all LXMLPxx10xxx products. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements. 3. RoyalBlue product is binned by radiometric power and peak wavelength rather than photometric lumens. Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. 4. CCT ±5% tester tolerance. 5. Typical CRI (Color Rendering Index) for CoolWhite is 70, NeutralWhite is 75 and WarmWhite is 80. 6. Spectral width at ½ of the peak intensity. 7. Total angle at which 90% of total luminous flux is captured. 8. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 9. All white, green, cyan, blue and royalblue products are built with Indium Gallium Nitride (InGaN). 10. All red, redorange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP). 11. CoolWhite, NeutralWhite, WarmWhite, Blue and RoyalBlue power light sources represented here are IEC825 class 2 for eye safety. LUXEON Rebel Datasheet DS56 (7/07) 6 Electrical Characteristics Electrical Characteristics at 350mA for LUXEON Rebel, Part Numbers LXMLPxx10xxx, Thermal Pad Temperature = 25ºC Table 3. Color CoolWhite Forward Voltage Vf [1] (V) Min. Typ. Max. 2.55 3.15 Typical Dynamic Resistance (Ω) RD 3.99 [2] 0.3 Typical Temperature Coefficient of Forward Voltage [3] (mV/oC) ΔVF / ΔTJ Typical Thermal Resistance Junction to Thermal Pad (oC/W) RθJC 3.0 10 NeutralWhite 2.55 3.15 3.99 0.3 3.0 10 WarmWhite 2.55 3.15 3.99 0.3 3.0 10 Green 2.55 3.15 3.99 0.3 6.0 10 Cyan 2.55 3.15 3.99 0.3 3.0 10 Blue 2.55 3.15 3.99 0.2 3.0 10 RoyalBlue 2.55 3.15 3.99 0.2 5.0 10 Red 2.31 2.9 3.51 1.65 3.5 12 RedOrange 2.31 2.9 3.51 1.5 3.0 12 Amber 2.31 2.9 3.51 1.3 2.5 12 Notes for Table 3: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 8 and 9. 3. Measured between 25°C = TJ = 110°C at If = 350 mA. Typical Electrical Characteristics at 700mA for LUXEON Rebel, Part Numbers LXMLPxx10xxx, Thermal Pad Temperature = 25ºC Table 4. Color Typical Forward Voltage Vf (V) CoolWhite 3.40 NeutralWhite 3.40 WarmWhite 3.40 Green 3.40 Cyan 3.40 Blue 3.40 RoyalBlue 3.40 Red 3.60 RedOrange 3.60 Amber 3.60 Notes for Table 4: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See figures 8 and 9. 3. Measured between 25°C = TJ = 110°C at If = 700 mA. LUXEON Rebel Datasheet DS56 (7/07) 7 Absolute Maximum Ratings Table 5. Parameter CoolWhite / NeutralWhite / WarmWhite / Green / Cyan / Blue / RoyalBlue Red / RedOrange / Amber DC Forward Current (mA) 1000 700 Peak Pulsed Forward Current (mA) 1000 700 Average Forward Current (mA) ESD Sensitivity 1000 700 < 8000V Human Body Model (HBM) Class 2 JESD22A114B < 400V Machine Model (MM) Class 2 JESD22A115B < 8000V Human Body Model (HBM) Class 2 JESD22A114B < 400V Machine Model (MM) Class 2 JESD22A115B 150°C 135°C LED Junction Temperature[1] Operating Case Temperature at 350mA 40°C 135°C 40°C 120°C Storage Temperature 40°C 135°C 40°C 135°C JEDEC 020c 260°C JEDEC 020c 260°C 3 3 Soldering Temperature Allowable Reflow Cycles Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) See Note 2 See Note 2 Notes for Table 5: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. JEDEC Moisture Sensitivity Table 6. Soak Requirements Level 1 Floor Life Standard Conditions Time (hours) Conditions Time unlimited ≤ 30°C / 85% RH 168 + 5/0 85°C / 85% RH LUXEON Rebel Datasheet DS56 (7/07) 8 Reflow Soldering Characteristics JEDEC 020c Table 7. Profile Feature Lead Free Assembly Average RampUp Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) Time Maintained Above Temperature (TL) Time Maintained Above Time (tL) Peak / Classification Temperature (TP) Time Within 5°C of Actual Peak Temperature (tP) Ramp Down Rate Time 25°C to Peak Temperature 60 180 seconds 217°C 60 150 seconds 260°C 20 40 seconds 6°C / second max 8 minutes max Notes for Table 7: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON Rebel Datasheet DS56 (7/07) 9 Mechanical Dimensions Figure 1. Package Outline Drawing. Notes for Figure 1: 1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. LUXEON Rebel Datasheet DS56 (7/07) 10 Pad Configuration Figure 2. Pad Configuration. Note for Figure 2: 1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. Solder Pad Design Note for Figure 3: The photograph below shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7K/W. Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available upon request. Figure 3. Solder Pad Layout. LUXEON Rebel Datasheet DS56 (7/07) 11 Wavelength Characteristics Green, Cyan, Blue, RoyalBlue, Red, RedOrange and Amber at Test Current Thermal Pad Temperature, TJ = 25°C Figure 4. Relative intensity vs. wavelength. CoolWhite at Test Current Thermal Pad Temperature = 25°C Relative Spectral Power Distribution 1.0 0.8 0.6 0.4 0.2 0.0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 5a. CoolWhite color spectrum of typical CCT part, integrated measurement. LUXEON Rebel Datasheet DS56 (7/07) 12 Spectral Power Distribution NeutralWhite at Test Current Thermal Pad Temperature = 25°C 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 5b. NeutralWhite color spectrum of typical CCT part, integrated measurement. Spectral Power Distribution WarmWhite at Test Current Thermal Pad Temperature = 25°C 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 5c. WarmWhite color spectrum of typical CCT part, integrated measurement. LUXEON Rebel Datasheet DS56 (7/07) 13 Typical Light Output Characteristics over Temperature CoolWhite, NeutralWhite, WarmWhite, Green, Cyan, Blue and RoyalBlue at Test Current. 1.2 Relative Luminous Flux lm / mW 1.1 1.0 0.9 White Photometric 0.8 Blue Photometric 0.7 Green Photometric Cyan Photometric 0.6 Royal-Blue Radiometric 0.5 -20 0 20 40 60 80 100 120 140 Thermal Pad Temperature °C Figure 6. Relative light output vs. Thermal Pad temperature for White, Green, Cyan, Blue and RoyalBlue. Red, RedOrange and Amber at Test Current 1.75 Red Photometric Relative Luminous Flux Output 1.50 Red-Orange Photometric Amber Photometric 1.25 1.00 0.75 0.50 0.25 0.00 -20 0 20 40 60 80 100 Thermal Pad Temperature °C Figure 7. Relative light output vs. Thermal Pad temperature for Red, RedOrange and Amber. LUXEON Rebel Datasheet DS56 (7/07) 14 Typical Forward Current Characteristics CoolWhite, NeutralWhite, WarmWhite, Green, Cyan, Blue and RoyalBlue, Thermal Pad Temperature = 25°C 1200 Forward Current mA 1000 800 600 400 200 0 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 Forward Voltage V Figure 8. Forward current vs. forward voltage for White, Green, Cyan, Blue and RoyalBlue. Red, RedOrange and Amber, Thermal Pad Temperature = 25°C 800 700 Forward Current mA 600 500 400 300 200 100 0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 Forward Voltage V Figure 9. Forward current vs. forward voltage for red, redorange and amber. LUXEON Rebel Datasheet DS56 (7/07) 15 Typical Relative Luminous Flux Typical Relative Luminous Flux vs. Forward Current for CoolWhite, NeutralWhite, WarmWhite, Green, Cyan, Blue and RoyalBlue, Thermal Pad Temperature = 25°C 2.50 2.25 2.00 Normalized Luminous Flux 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 200 400 600 800 1000 1200 Forward Current mA Figure 10. Relative luminous flux or radiometric power vs. forward current for white, green, cyan, blue and royal blue at Thermal Pad = 25ºC maintained, test current 350 mA. Typical Relative Luminous Flux vs. Forward Current for Red, RedOrange, Amber, Thermal Pad Temperature = 25°C 2.00 Normalized Luminous Flux lm 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 100 200 300 400 500 600 700 800 Forward Current mA Figure 11. Relative luminous flux vs. forward current for red, redorange and amber at Thermal Pad = 25ºC maintained, test current 350 mA. LUXEON Rebel Datasheet DS56 (7/07) 16 Current Derating Curves Current Derating Curve for 350 mA drive current CoolWhite, NeutralWhite, WarmWhite, Green, Cyan, Blue and RoyalBlue 400 IF - Forward Current mA 350 300 250 200 15º C/W 150 25º C/W 100 35º C/W 50 45º C/W 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 12: Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. Current Derating Curve for 350 mA drive current Red, RedOrange, Amber 400 IF - Forward Current mA 350 300 250 200 150 15º C/W 25º C/W 100 35º C/W 50 45º C/W 0 0 25 50 75 100 125 150 TA - Ambient Temperature °C Figure 13: Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC. LUXEON Rebel Datasheet DS56 (7/07) 17 Current Derating Curve for 700 mA drive current CoolWhite, NeutralWhite, WarmWhite, Green, Cyan, Blue and RoyalBlue 800 IF - Forward Current mA 700 600 500 400 300 15º C/W 200 25º C/W 100 35º C/W 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 14: Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. Current Derating Curve for 700 mA drive current Red, RedOrange, Amber 800 IF - Forward Current mA 700 600 500 400 300 15º C/W 200 25º C/W 100 35º C/W 0 0 25 50 75 100 125 150 TA - Ambient Temperature °C Figure 15: Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC. LUXEON Rebel Datasheet DS56 (7/07) 18 Current Derating Curve for 1000mA drive current CoolWhite, NeutralWhite, WarmWhite, Green, Cyan, Blue and RoyalBlue 1200 IF - Forward Current mA 1000 800 600 15°C/W 400 25°C/W 200 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 16: Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. LUXEON Rebel Datasheet DS56 (7/07) 19 Typical Radiation Patterns Typical Representative Spatial Radiation Pattern for CoolWhite, NeutralWhite and WarmWhite Lambertian 100% 90% 80% Relative Intensity % 70% 60% 50% 40% 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 17: Typical Representative Spatial Radiation Pattern for CoolWhite, NeutralWhite and WarmWhite Lambertian. Typical Polar Radiation Pattern for White Lambertian 0º - 30º 30º - 60º 60º - 90º 0 20% 40% 60% 80% 90º 100% Figure 18: Typical Polar Radiation Pattern for CoolWhite, NeutralWhite and WarmWhite Lambertian. LUXEON Rebel Datasheet DS56 (7/07) 20 Typical Representative Spatial Radiation Pattern for Green, Cyan, Blue and RoyalBlue Lambertian 1.2 Relative Intensity % 1.0 0.8 0.6 0.4 Typical Upper Bound 0.2 Typical Lower Bound 0.0 -90 -70 -50 -30 -10 10 30 50 70 90 Angular Displacement deg Figure 19: Typical Representative Spatial Radiation Pattern for Green and Royal Blue Lambertian. Typical Polar Radiation Pattern for Green, Cyan, Blue and RoyalBlue Lambertian 0° 30° 330° 60° 300° 90° 270° 1 1 1 1 0 0 0 0 0 1 1 1 1 Figure 20: Typical Polar Radiation Pattern for Green and Royal Blue Lambertian. LUXEON Rebel Datasheet DS56 (7/07) 21 Typical Representative Spatial Radiation Pattern for Red, RedOrange and Amber Lambertian 100% 90% 80% Relative Intensity % 70% 60% 50% 40% 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 21: Typical Representative Spatial Radiation Pattern for Red, RedOrange and Amber Lambertian. Typical Polar Radiation Pattern for Red, RedOrange and Amber Lambertian 0° -30° 30° -60° -90° -120% -100% 60° -80% -60% -40% -20% 0% 20% 40% 60% 80% 100% 90° 120% Figure 22: Typical Polar Radiation Pattern for Red, RedOrange and Amber Lambertian. LUXEON Rebel Datasheet DS56 (7/07) 22 Emitter Pocket Tape Packaging LUXEON Rebel Datasheet DS56 (7/07) 23 Emitter Reel Packaging LUXEON Rebel Datasheet DS56 (7/07) 24 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the tech nical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (VF). Decoding Product Bin Labeling LUXEON Rebel Emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emit ters packaged on a single reel. All emitters packaged within a reel are of the same 3variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Format of Labeling for Emitters Reels of Green, Cyan, Blue, RoyalBlue, Red, RedOrange and Amber Emitters are labeled with a three digit alphanumeric CAT code following the format below. ABC A = Flux bin (J, H, J, K etc.) B = Color bin (2, 4, 6 etc.) C = VF bin (D, E, F, G etc.) Reels of CoolWhite, NeutralWhite and WarmWhite Emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A = Flux bin (J, H, J, K etc.) B and C = Color bin (W0, U0, V0 etc.) C = VF bin (D, E, F, G etc.) LUXEON Rebel Datasheet DS56 (7/07) 25 Luminous Flux Bins Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters (tested and binned at 350mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 8. Flux Bins All Colors (except RoyalBlue) Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) A 8.2 10.7 B 10.7 13.9 LUXEON Rebel Datasheet DS56 (7/07) C 13.9 18.1 D 18.1 23.5 E 23.5 30 F 30 40 G 40 50 H 50 60 J 60 70 K 70 80 L 80 90 M 90 100 N 100 120 P 120 140 Q 140 160 R 160 180 S 180 200 T 200 220 U 220 240 V 240 260 W 260 280 X 280 300 26 Table 9. Flux Bins RoyalBlue Only (tested and binned at 350mA) Bin Code Minimum Radiometric Flux (mW) Maximum Radiometric Flux (mW) A 175 225 B 225 275 C 275 350 D 350 425 E 425 500 F 500 600 G 600 700 H 700 800 J 800 900 K 900 1000 CoolWhite Bin Structure Figure 23: CoolWhite Bin Structure. LUXEON Rebel Datasheet DS56 (7/07) 27 CoolWhite Bin Coordinates CoolWhite LUXEON Rebel Emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range 10,000K to 4,500K Table 10. CoolWhite Bin Coordinates Bin Code Y0 YA XM XN X0 XP WM WN W0 WP X Y 0.274238 0.303051 0.307553 0.282968 0.282968 0.307553 0.311163 0.289922 0.300667 0.332708 0.310778 0.283772 0.283772 0.310778 0.293192 0.270316 0.301093 0.313617 0.314792 0.303051 0.342244 0.354992 0.344438 0.332708 0.303051 0.314792 0.316042 0.305170 0.332708 0.344438 0.333222 0.322386 0.305170 0.316042 0.317466 0.307553 0.322386 0.333222 0.320438 0.310778 0.307553 0.317466 0.319597 0.311163 0.310778 0.320438 0.301303 0.293192 0.313617 0.328636 0.328823 0.314792 0.354992 0.368952 0.356917 0.344438 0.314792 0.328823 0.329006 0.316042 0.344438 0.356917 0.345092 0.333222 0.316042 0.329006 0.329220 0.317466 0.333222 0.345092 0.331331 0.320438 0.317466 0.329220 0.329393 0.318606 0.320438 0.331331 0.320211 0.310201 Typical CCT (K) Bin Code 8000 WQ 8000 VM 6700 VN 6700 V0 6700 VP 6700 UM 6000 UN 6000 U0 6000 UP X Y 0.318606 0.329393 0.329544 0.319597 0.328636 0.348147 0.346904 0.328823 0.310201 0.320211 0.310495 0.301303 0.368952 0.385629 0.371742 0.356917 0.328823 0.346904 0.345781 0.329006 0.356917 0.371742 0.359190 0.345092 0.329006 0.345781 0.344443 0.329220 0.345092 0.359190 0.344232 0.331331 0.329220 0.344443 0.343352 0.329393 0.331331 0.344232 0.332034 0.320211 0.348147 0.367294 0.364212 0.346904 0.385629 0.400290 0.382878 0.371742 0.346904 0.364212 0.362219 0.345781 0.371742 0.382878 0.371616 0.359190 0.345781 0.362219 0.359401 0.344443 0.359190 0.371616 0.355699 0.344232 0.344443 0.359401 0.357079 0.343352 0.344232 0.355699 0.342581 0.332034 Typical CCT (K) 6000 5300 5300 5300 5300 4750 4750 4750 4750 6000 Note for Table 10: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Datasheet DS56 (7/07) 28 NeutralWhite Bin Structure Figure 24: NeutralWhite Bin Structure. NeutralWhite LUXEON Rebel Emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 4,500K to 3,500K Table 11. NeutralWhite Bin Coordinates Bin Code TM TN T0 TP SM SN X Y 0.367294 0.385953 0.381106 0.364212 0.364212 0.381106 0.378264 0.362219 0.400290 0.412995 0.393747 0.382878 0.382878 0.393747 0.382458 0.371616 0.362219 0.378264 0.374075 0.359401 0.371616 0.382458 0.365822 0.355699 0.359401 0.374075 0.370582 0.357079 0.355699 0.365822 0.351953 0.342581 0.385953 0.402270 0.396279 0.381106 0.412995 0.422776 0.403508 0.393747 0.381106 0.396279 0.392368 0.378264 0.393747 0.403508 0.390932 0.382458 Typical CCT (K) Bin Code 4300 S0 4300 SP 4300 RM 4300 RN 3950 R0 3950 RP X Y 0.378264 0.392368 0.387071 0.374075 0.374075 0.387071 0.382598 0.370582 0.382458 0.390932 0.373899 0.365822 0.365822 0.373899 0.359515 0.351953 0.402270 0.420940 0.414776 0.396279 0.422776 0.432618 0.416097 0.403508 0.396279 0.414776 0.408593 0.392368 0.403508 0.416097 0.399525 0.390932 0.392368 0.408593 0.402113 0.387071 0.390932 0.399525 0.382156 0.373899 0.387071 0.402113 0.396564 0.382598 0.373899 0.382156 0.367284 0.359515 Typical CCT (K) 3950 3950 3650 3650 3650 3650 Note for Table 11: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Datasheet DS56 (7/07) 29 WarmWhite Bin Structure Figure 25: WarmWhite Bin Structure. WarmWhite LUXEON Rebel Emitters are tested and binned by x,y coordinates. 16 Color Bins, CCT Range 3,500K to 2,670K Table 12. WarmWhite Bin Coordinates Bin Code QM QN Q0 QP PM PN P0 PP X Y 0.420940 0.438458 0.431186 0.414776 0.414776 0.431186 0.423956 0.408593 0.432618 0.440399 0.423386 0.416097 0.416097 0.423386 0.406472 0.399525 0.408593 0.423956 0.416487 0.402113 0.399525 0.406472 0.389001 0.382156 0.402113 0.416487 0.409996 0.396564 0.382156 0.389001 0.373814 0.367284 0.438458 0.453820 0.445639 0.431186 0.440399 0.445980 0.428680 0.423386 0.431186 0.445639 0.437578 0.423956 0.423386 0.428680 0.411632 0.406472 0.423956 0.437578 0.429373 0.416487 0.406472 0.411632 0.394281 0.389001 0.416487 0.429373 0.422124 0.409996 0.389001 0.394281 0.378952 0.373814 Typical CCT (K) Bin Code 3375 NM 3375 NN 3375 N0 3375 NP 3150 MM 3150 MN 3150 M0 3150 MP X Y 0.453820 0.470507 0.461404 0.445639 0.445639 0.461404 0.452512 0.437578 0.445980 0.450832 0.433334 0.428680 0.428680 0.433334 0.416241 0.411632 0.437578 0.452512 0.443600 0.429373 0.411632 0.416241 0.399111 0.394281 0.429373 0.443600 0.435591 0.422124 0.394281 0.399111 0.383714 0.378952 0.470507 0.486648 0.476733 0.461404 0.450832 0.454191 0.436634 0.433334 0.461404 0.476733 0.467132 0.452512 0.433334 0.436634 0.419632 0.416241 0.452512 0.467132 0.457663 0.443600 0.416241 0.419632 0.402866 0.399111 0.443600 0.457663 0.448994 0.435591 0.399111 0.402866 0.387515 0.383714 Typical CCT (K) 2950 2950 2950 2950 2760 2760 2760 2760 Note for Table 12: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Datasheet DS56 (7/07) 30 Color Bins Green, Cyan and Blue LUXEON Rebel Emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Green Emitters Table 13. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 1 520 525 2 525 530 3 530 535 4 535 540 5 540 545 6 545 550 Dominant Wavelength Bin Structure for Cyan Emitters Table 14. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 1 490 495 2 495 500 3 500 505 4 505 510 5 510 515 6 515 520 Dominant Wavelength Bin Structure for Blue Emitters Table 15. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 1 460 465 2 465 470 3 470 475 4 475 480 5 480 485 6 485 490 RoyalBlue Luxeon Rebel Emitters are tested and binned for peak wavelength. Peak Wavelength Bin Structure for RoyalBlue Emitters Table 16. LUXEON Rebel Datasheet DS56 (7/07) Bin Code Minimum Peak Wavelength (nm) Maximum Peak Wavelength (nm) 3 440 445 4 445 450 5 450 455 6 455 460 7 460 465 8 465 470 31 Red, RedOrange and Amber LUXEON Rebel Emitters are tested and binned for dominant wavelength. Dominant Wavelength Bin Structure for Red Emitters Table 17. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 4 620.5 631.0 5 631.0 645.0 Dominant Wavelength Bin Structure for RedOrange Emitters Table 18. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 2 613.5 620.5 Dominant Wavelength Bin Structure for Amber Emitters Table 19. Amber Dominant Wavelength Bins Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 1 584.5 587.0 2 587.0 589.5 4 589.5 592.0 6 592.0 594.5 7 594.5 597.0 Forward Voltage Bins Table 20 lists minimum and maximum VF bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 20. VF Bins LUXEON Rebel Datasheet DS56 (7/07) Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) A 2.31 2.55 B 2.55 2.79 C 2.79 3.03 D 3.03 3.27 E 3.27 3.51 F 3.51 3.75 G 3.75 3.99 32 Company Information Philips Lumileds Lighting Company is a world class supplier of Light Emitting Diodes (LEDs) and produces billions of LEDs annually. Philips Lumileds is a fully integrated supplier producing core LED material in all three base colors (red, green, blue) and white. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands as well as production capabilities in San Jose, Philips Lumileds may make process or materials changes affecting the perform ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. Penang Malaysia and Singapore. Founded in 1999, Philips Lumileds is the highflux LED technology leader and is dedicated to bridging the gap between solidstate LED technology and the lighting world. Philips Lumileds technologies, LEDs and systems are enabling new applications and markets in the lighting world. www.luxeon.com www.lumiledsfuture.com For technical assistance or the location of your nearest sales office contact any of the following: North America: +1 888 589 3662 or [email protected] Europe: 00 800 443 88 873 or [email protected] ©2007 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. Asia: 800 5864 5337 or [email protected]