1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612SYKCGKC-F01 PRELIMINARY SPEC Super Bright Yellow Green Features Description z 1.6mmx1.25mm SMT LED, 0.65mm THICKNESS. The Super Bright Yellow device is made with DH InGaAlP z BI-COLOR,LOW POWER CONSUMPTION. (on GaAs substrate) light emitting diode chip. z WIDE VIEWING ANGLE. The Green source color devices are made with InGaAlP on z IDEAL FOR BACKLIGHT AND INDICATOR. GaAs substrate Light Emitting Diode. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1100 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203002069 Selection Guide Part No. Dice APTB1612SYKCGKC-F01 Lens Type Super Bright Yellow (InGaAlP) WATER CLEAR Green (InGaAlP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 36 100 18 50 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 574 nm IF=20mA Super Bright Yellow Green 590 570 nm IF=20mA Spectral Line Half-width Super Bright Yellow Green 20 20 nm IF=20mA C Capacitance Super Bright Yellow Green 20 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow Green 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current Super Bright Yellow Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 175 150 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1100 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203002069 APTB1612SYKCGKC-F01 Super Bright Yellow SPEC NO: DSAF1100 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203002069 Green SPEC NO: DSAF1100 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203002069 APTB1612SYKCGKC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1100 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203002069 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF1100 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu APTB1612SYKCGKC-F01 DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203002069