ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Description The ACE5018T series are a group of positive voltage regulators manufactured by CMOS technologies with ultra low power consumption and low dropout voltage, which provide large output currents even when the difference of the input-output voltage is small. The ACE5018T series can deliver 300mA output current and allow an input voltage as high as 8V. The series are very suitable for the battery-powered equipment, such as RF applications and other systems requiring a quiet voltage source. Features Low Quiescent Current:1.0μA Operating Voltage Range: 1.8V～8V Output Current: 300mA Low Dropout Voltage： 110mV@100mA(VOUT =3.3V) Output Voltage: 1.2~ 5.0V High Accuracy: ±2％/±1％（Typ.） High Power Supply Rejection Ratio: 50dB@1kHz Low Output Noise: 27xVOUT μVRMS (10Hz~100kHz) Excellent Line and Load Transient Response Built-in Current Limiter, Short-Circuit Protection Application Portable consumer equipments Radio control systems Laptop, Palmtops and PDAs Wireless Communication Equipments Portable Audio Video Equipments Ultra Low Power Microcontroller VER 1.1 1 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Absolute Maximum Ratings(1) Unless otherwise specified, TA=25°C Parameter Input Voltage(2) (2) Output Voltage Output Current Symbol Max Unit VIN -0.3~9 V VOUT -0.3~VIN+0.3 V IOUT 600 mA SOT-23-3 Power Dissipation 0.4 SOT-23-5 0.4 Pd SOT-89-3 W 0.6 DFN1*1-4 0.4 Operating Temperature Topr - 40~125 O C O C Storage Temperature Tstg - 40~125 Soldering Temperature & Time Tsolder 260 OC,10s Note: (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods my affect device reliability. (2) All voltages are with respect to network ground terminal. Recommended Operating Conditions Parameter MIN. MAX. Units Supply voltage at VIN 1.8 8 V Operating junction temperature range, Tj -40 125 °C Operating free air temperature range, TA -40 85 °C VER 1.1 2 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Packaging Type SOT-23-3 SOT-23-3 A B C 1 3 3 2 2 3 1 SOT-23-5 SOT-23-5 SOT-89-3 SOT-89-3 DFN1*1-4 DFN1*1-4 Pin Name Function 2 2 VSS Ground 1 3 1 VOUT Output 3 1 4 VIN Power input 3 CE Chip Enable Pin NC No Connection Thermal PAD Ground A B C 2 1 2 1 5 3 2 1 2 3 4 EP Ordering information ACE5018T X XX XX + H Halogen - free Pb - free BMA：SOT-23-3A BMB：SOT-23-3B BMC：SOT-23-3C BN：SOT-23-5 AMA：SOT-89-3A AMB：SOT-89-3B AMC：SOT-89-3C IN：DFN1*1-4 Output Voltage：1.2 / 1.5V …../5.0V A：1% B：2% VER 1.1 3 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Block Diagram Typical Application Circuit VER 1.1 4 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Electrical Characteristics (VIN=VOUT+1V, C IN=COUT =1μF， TA=25 OC, unless otherwise specified) Parameter Symbol Input Voltage VIN Output Voltage Range VOUT IOUT =1mA DC Output Accuracy Dropout Voltage Conditions Vdif(2) Min Max Units 1.8 8 V 1.2 5 V -2 2 % -1 1 % IOUT =100mA, 110 VOUT=3.3V 1.2V≤VOUT Supply Current ISS IOUT =0 ≤3.3V 3.3V<VOUT ≤5.0V Standby Current Line Regulation Load Regulation Temperature Coefficient ISTBY CE=VSS ∆VOUT IOUT =10mA VOUT ✕∆V IN VOUT +1V≤VIN≤8V ∆VOUT VIN= VOUT +1V, IOUT =10mA, VOUT ✕∆TA -40°C<TA<125°C Output Current Limit ILIM Short Current ISHORT Power Supply Rejection Ratio PSRR Output Noise Voltage VON CE "High" Voltage VCE“H” CE "Low" Voltage VCE“L” COUT Auto-Discharge Resistance RDISCHRG VOUT=0.5xVOUT(Normal), VIN = 5V 550 VOUT =VSS IOUT =50mA 1.5 μA 1.0 1.5 μA 0.1 μA 0.3 %/V 10 mV 100 ppm 700 70 1kHz 50 10kHz 40 100kHz 35 1.5 200 mA mA dB μVRMS 27 x VOUT BW=10Hz to 100kHz VCE=VSS 850 20 100Hz VIN=5V, VOUT =3.0V, mV 1.0 0.05 1mA≤IOUT≤100mA ∆VOUT Typ(1) VIN V 0.3 V Ω NOTE: (1) Typical numbers are at 25°C and represent the most likely norm. (2) Vdif：The Difference Of Output Voltage And Input Voltage When Input Voltage Is Decreased Gradually Till Output Voltage Equals To 98% Of VOUT (E). VER 1.1 5 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Typical Performance Characteristics VIN=VOUT +1V, CIN=COUT =1μF，TA=25℃,unless otherwise specified VER 1.1 6 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Application Information Selection of Input/ Output Capacitors In general, all the capacitors need to be low leakage. Any leakage the capacitors have will reduce efficiency, increase the quiescent current. A recent trend in the design of portable devices has been to use ceramic capacitors to filter DC-DC converter inputs. Ceramic capacitors are often chosen because of their small size, low equivalent series resistance (ESR) and high RMS current capability. Also, recently, designers have been looking to ceramic capacitors due to shortages of tantalum capacitors. Unfortunately, using ceramic capacitors for input filtering can cause problems. Applying a voltage step to a ceramic capacitor causes a large current surge that stores energy in the inductances of the power leads. A large voltage spike is created when the stored energy is transferred from these inductances into the ceramic capacitor. These voltage spikes can easily be twice the amplitude of the input voltage step. Many types of capacitors can be used for input bypassing, however, caution must be exercised when using multilayer ceramic capacitors (MLCC). Because of the self-resonant and high Q characteristics of some types of ceramic capacitors, high voltage transients can be generated under some start-up conditions, such as connecting the LDO input to a live power source. Adding a 3Ω resistor in series with an X5R ceramic capacitor will minimize start-up voltage transients. The LDO also requires an output capacitor for loop stability. Connect a 1μF tantalum capacitor from OUT to GND close to the pins. For improved transient response, this output capacitor may be ceramic. COUT Auto-Discharge Function ACE5018TB series can discharge the electric charge in the output capacitor (COUT), when a low signal to the CE pin, which enables a whole IC circuit turn off, is inputted via the N-channel transistor located between the VOUT pin and the VSS pin (cf. BLOCK DIAGRAM). The COUT auto-discharge resistance value is set at 200Ω (VOUT=3.0V @ VIN=5.0V at typical). The discharge time of the output capacitor (COUT) is set by the COUT auto-discharge resistance (R) and the output capacitor (COUT ). By setting time constant of a COUT auto-discharge resistance value [RDISCHRG] and an output capacitor value (COUT) as τ (τ=C x RDISCHRG), the output voltage after discharge via the N-channel transistor is calculated by the following formulas. ( V : Output voltage after discharge, VOUT(E) : Output voltage, t: Discharge time, τ: COUT auto-discharge resistance RDISCHRG×Output capacitor (COUT) value C) VER 1.1 7 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Packing Information SOT-23-3 VER 1.1 8 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Packing Information SOT-23-5 VER 1.1 9 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Packing Information SOT-89-3 VER 1.1 10 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Packing Information DFN1*1-4 VER 1.1 11 ACE5018T Ultra Low Current Consumption 300mA CMOS Voltage Regulator Notes ACE does not assume any responsibility for use as critical components in life support devices or systems without the express written approval of the president and general counsel of ACE Electronics Co., LTD. As sued herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and shoes failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ACE Technology Co., LTD. http://www.ace-ele.com/ VER 1.1 12