CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSC - Series ・Super low ESR, high ripple current capability ・Lower profile than PSA (φ8×8L to φ10×12.5L) ・Rated voltage range : 2.5 to 16Vdc ・Nominal capacitance range : 270 to 2,700µF ・Endurance : 15,000 hours at 105℃ ・Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards ・Added 2.5V 820µF (ESR 5mΩ max.) ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free PSC Low profile Lower ESR PSA P60 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate -55 to +105℃ 2.5 to 16Vdc ±20% (M) Rated voltage×1.15 I=0.2CV or 500µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (Vdc) (at 20℃, 120Hz) (at 105℃) (at 20℃ after 2 minutes) 0.10 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ●Terminal ◆MARKING Code : E φd φD' L' 15min. EX) 2.5V820µF F±0.5 Coated Case 4min. Size code H08 φD 8.0 φd 0.6 F 3.5 φD' L' L+1.0max. HB5 JB5 8.0 10.0 0.8(Note1) 0.8(Note1) 3.5 5.0 φD+0.5max. L+1.5max. JC5 10.0 0.6 5.0 C 3D6 820 2.5V Note1 : 0.6 for rated volt 16V. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 58 CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSCSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSC AAA E AA AAA M AAA S Supplement code (Note2) Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 1000µF:102) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category (Note2) PSC series, 2.5V820µF(ESR 5mΩ max.) has supplement code "J". Can case, terminal and terminal plating are the same as all others in PSC series. Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (µF) 560 820 820 1,000 1,000 1,500 2,700 560 680 1,000 470 560 820 1,500 390 680 270 330 330 470 Case size φD×L(mm) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 7 5 7 7 7 7 8 7 7 6 8 8 7 10 9 7 11 10 10 10 6,100 6,100 6,100 6,100 6,100 6,100 5,560 6,100 6,100 6,640 5,700 5,700 6,640 5,560 5,650 6,100 5,080 6,100 6,100 6,100 APSC2R5E□□561MH08S APSC2R5E□□821MH08J APSC2R5E□□821MH08S APSC2R5E□□102MH08S APSC2R5E□□102MHB5S APSC2R5E□□152MHB5S APSC2R5E□□272MJB5S APSC4R0E□□561MH08S APSC4R0E□□681MHB5S APSC4R0E□□102MJB5S APSC6R3E□□471MH08S APSC6R3E□□561MH08S APSC6R3E□□821MJB5S APSC6R3E□□152MJB5S APSC100E□□391MHB5S APSC100E□□681MJB5S APSC160E□□271MHB5S APSC160E□□331MJB5S APSC160E□□331MJC5S APSC160E□□471MJB5S 8 ×8 8×8 8×8 8×8 8× 11.5 8 × 11.5 10 ×11.5 8 ×8 8× 11.5 10×11.5 8 ×8 8×8 10× 11.5 10×11.5 8 × 11.5 10×11.5 8× 11.5 10× 11.5 10× 12.5 10× 11.5 □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 59 CAT. No. E1001Q