AZ960 MINIATURE POWER RELAY FEATURES • • • • • • 1 Form A or 1 Form C Standard and sensitive coils High in-rush capability All plastics rated 94V-0 UL, CUR file E44211 Epoxy sealed version available CONTACTS GENERAL DATA Arrangement SPST NO (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 30 VDC or 250 VAC UL, CUR 5 A at 250 VAC 1/10 HP 125, 250 VAC Minimum Load 5 VDC, 0.1 A Material Silver alloy Resistance < 100 milliohms initially (24 V, 1 A voltage drop method) COIL Minimum operations 1 x 107 1 x 105 at rated load Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 750 Vrms contact to contact Insulation Resistance 1000 megohms min. at 500 VDC, 20°C, 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Standard: 40°C (-40°F) to 75°C (167°F) Sensitive: 40°C (-40°F) to 80°C (176°F) Storage Power At Pickup Voltage (typical) Standard coil: 176 mW Sensitive coil: 129 mW Max Continuous Dissipation 1.3 W at 20°C (68°F) 0.9 W at 40°C (104°F) Temperature Rise At nominal coil voltage: Standard coil: 31°C (56°F) Sensitive coil: 23°C (41°F) Max. Temperature Life Expectancy Mechanical Electrical 105°C (221°F) NOTES 40°C (-40°F) to 105°C (221°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 250°C (482°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 8 grams 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Rev. 7/10/97 AZ960 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.5 6 Max. Continuous VDC 9.5 Coil Resistance ±10% 69 11.4 100 4.2 ORDER NUMBER* AZ960–1C–5D AZ960–1C–6D 9 6.3 17.1 225 AZ960–1C–9D 12 8.4 22.8 400 AZ960–1C–12D 14 9.8 26.6 544 AZ960–1C–14D 18 12.6 34.2 900 AZ960–1C–18D 24 16.8 45.6 1600 AZ960–1C–24D 48 33.6 91.2 6400 AZ960–1C–48D Max. Continuous VDC 11.4 Coil Resistance ±10% 100 ORDER NUMBER* 13.7 145 AZ960–1C–6DS SENSITIVE RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 Must Operate VDC 3.6 6 4.3 AZ960–1C–5DS 9 6.5 20.6 325 AZ960–1C–9DS 12 8.6 27.3 575 AZ960–1C–12DS 14 10.1 32.0 790 AZ960–1C–14DS 18 13.0 41.1 1300 AZ960–1C–18DS 24 17.3 54.3 2310 AZ960–1C–24DS 48 34.7 109.5 9220 AZ960–1C–48DS *Add suffix “E” for epoxy sealed version. Substitute “1A” in place of the “1C” to indicate 1 Form A. MECHANICAL DATA .807 (20.5) .413 (10.5) .807 (20.5) Term. No. Dimensions Tol.: ±0.005(0.13) 2, 3 0.024 X 0.024 (0.6 X 0.6) 1, 4 0.016 X 0.024 (0.4 X 0.6) 5 0.010 X 0.032 (0.25 X 0.8 ) .047 (1.2) 3 places .039 (1.0) 2 places .20 (5.08) .10 (2.54) .134 (3.4) .54 (1.36) .54 (1.36) .20 .50 (5.08) (12.70) PC BOARD LAYOUT .20 (5.08) .10 (2.54) .30 (7.62) .0571 (1.44) .10 (2.54) .10 (2.54) .054 (1.36) .50 (12.7) .039 (1.0) 2 places WIRING DIAGRAM 1 2 1 NC COM .30 (7.62) .10 (2.54) COM NO 4 2 NO 3 4 3 Viewed toward terminals .047 (1.2) 2 places .20 (5.08) .057 (1.44) .50 (12.7) .054 (1.36) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" Rev. 7/10/97