Digitron MAC38-7 Silicon bidirectional thyristor Datasheet

DIGITRON SEMICONDUCTORS
MAC37 SERIES
MAC38 SERIES
SILICON BIDIRECTIONAL THYRISTORS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS
Rating
Symbol
Peak repetitive off-state voltage
(TJ = 110°C)
MAC37-1,MAC38-1
MAC37-2,MAC38-2
MAC37-3,MAC38-3
MAC37-4,MAC38-4
MAC37-5,MAC38-5
MAC37-6,MAC38-6
MAC37-7,MAC38-7
Value
Unit
(1)
25
50
100
200
300
400
500
VDRM
RMS on-state current
IT(RMS)
Volts
25
Amps
Peak non-repetitive surge current
(1 cycle, 60Hz, TJ = -40 to + 110°C)
ITSM
Circuit fusing considerations (TJ = -40 to + 110°C, t = 8.3ms)
I2t
210
A2s
PGM
5.0
Watts
PG(AV)
0.5
Watts
Peak gate power
(2)
Average gate power
Peak gate current
Amps
225
(2)
IGM
2
Amps
Operating junction temperature range
TJ
-40 to +110
°C
Tstg
-40 to +150
°C
30
In. lb.
Storage temperature range
Mounting torque
Note 1: For either direction of blocking voltage. VDRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for open gate conditions. Thyristor devices shall
not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking voltage.
Note 2: TJ = 110°C, 1 second maximum duration: 5.0% duty cycle, ITM = 10A.
THERMAL CHARACTERISTICS
Characteristic
Thermal resistance, junction to case
Symbol
Maximum
Unit
RӨJC
1.0
°C/W
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic
Symbol
Peak blocking current (either direction)
(VD = Rated VDRM, TJ = 110°C)
IDRM
Peak on-state voltage (either direction)
(ITM = 35A peak)
VTM
Gate trigger current (continuous dc) (3)
(VD = 7V, RL = 47Ω)
MT2(+),G(+); MT2(-),G(-)
IGT
Gate trigger voltage (continuous dc) (3)
(VD = 7V, RL = 47Ω)
MT2(+),G(+); MT2(-),G(-)
VGT
Gate trigger voltage (continuous dc) (3)
(VD = Rated VDRM, RL = 100Ω, TJ = 110°C)
MT2(+),G(+); MT2(-),G(-)
VGD
Holding current (either direction)
(VD = 7V, ITM = 150mA, gate open)
IH
Gate controlled turn-on time
(ITM = 25A, IGT = 200mA)
ton
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
Min
Typ.
Max
-
-
2.0
-
1.4
1.9
-
20
75
-
1.0
3.0
0.2
-
-
-
10
75
-
1.0
-
Unit
mA
Volts
mA
Volts
Volts
[email protected]
www.digitroncorp.com
Rev. 20130207
mA
µs
DIGITRON SEMICONDUCTORS
MAC37 SERIES
MAC38 SERIES
SILICON BIDIRECTIONAL THYRISTORS
Characteristic
Symbol
Critical forward voltage application rate
(@ VDRM, TJ = 110°C, gate open)
Min
Typ.
Max
-
100
-
dv/dt
Note 3: All voltage polarity reference to Main Terminal 1.
MECHANICAL CHARACTERISTIC
Case
Digi PF2 (MAC37 Series)
Marking
Alpha-numeric
Polarity
Cathode is stud
DIGI PF2
A
B
C
E
F
J
K
N
Q
Inches
Min
Max
0.501
0.505
0.465
0.475
0.330
0.380
0.100
0.035
0.085
0.080
0.097
0.800
0.510
0.065
0.160
Millimeters
Min
Max
12.730
12.830
11.810
12.060
8.390
9.650
2.540
0.890
2.160
2.040
2.460
20.320
12.950
1.650
4.060
MECHANICAL CHARACTERISTIC
Case
TO-48 (MAC38 Series)
Marking
Alpha-numeric
Polarity
Cathode is stud
TO-48
A
B
C
F
H
J
K
L
Q
T
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
Inches
Min
Max
0.604
0.614
0.551
0.559
1.050
1.190
0.135
0.160
0.265
0.420
0.455
0.620
0.670
0.300
0.350
0.055
0.085
0.501
0.505
Millimeters
Min
Max
15.340
15.600
14.000
14.200
2.670
30.230
3.430
4.060
6.730
10.670
11.560
15.750
17.020
7.620
8.890
1.400
2.160
12.730
12.830
[email protected]
www.digitroncorp.com
Rev. 20130207
Unit
V/µs
DIGITRON SEMICONDUCTORS
MAC37 SERIES
MAC38 SERIES
144 Market Street
Kenilworth NJ 07033 USA
SILICON BIDIRECTIONAL THYRISTORS
phone +1.908.245-7200
fax +1.908.245-0555
[email protected]
www.digitroncorp.com
Rev. 20130207
DIGITRON SEMICONDUCTORS
MAC37 SERIES
MAC38 SERIES
144 Market Street
Kenilworth NJ 07033 USA
SILICON BIDIRECTIONAL THYRISTORS
phone +1.908.245-7200
fax +1.908.245-0555
[email protected]
www.digitroncorp.com
Rev. 20130207
Similar pages