TI MC3303 Quadruple low-power operational amplifier Datasheet

MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
D
D
D
D
D
D
D
MC3303 . . . D, N, OR PW PACKAGE
MC3403 . . . D, DB, N, NS, OR PW PACKAGE
(TOP VIEW)
Wide Range of Supply Voltages, Single
Supply . . . 3 V to 36 V or Dual Supplies
Class AB Output Stage
True Differential Input Stage
Low Input Bias Current
Internal Frequency Compensation
Short-Circuit Protection
Designed to Be Interchangeable With
Motorola MC3303, MC3403
1OUT
1IN–
1IN+
VCC+
2IN+
2IN–
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN–
4IN+
VCC–
3IN+
3IN–
3OUT
description
The MC3303 and the MC3403 are quadruple operational amplifiers similar in performance to the µA741, but
with several distinct advantages. They are designed to operate from a single supply over a range of voltages
from 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies
is 3 V to 36 V. The common-mode input range includes the negative supply. Output range is from the negative
supply to VCC – 1.5 V. Quiescent supply currents are less than one-half those of the µA741.
The MC3303 is characterized for operation from –40°C to 85°C, and the MC3403 is characterized for operation
from 0°C to 70°C.
AVAILABLE OPTIONS
PACKAGE
TA
VIOMAX
AT 25°C
PLASTIC
SMALL OUTLINE
(D, NS)
0°C to 70°C
10 mV
MC3403D
MC3403NS
–40°C to 85°C
8 mV
MC3303D
PLASTIC SHRINK
SMALL OUTLINE
(DB)
PLASTIC
DIP
(N)
PLASTIC
THIN SHRINK
SMALL OUTLINE
(PW)
MC3403DB
MC3403N
MC3403PW
—
MC3303N
MC3303PW
The D package is available taped and reeled. Add R suffix to the device type (e.g., MC3403DR). The DB, NS,
and PW packages are only available taped and reeled.
logic diagram (each amplifier)
IN+
+
IN–
–
OUT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2002, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
schematic (each amplifier)
Common
Bias Circuitry
VCC+
5 pF
IN+
To Three
Other
Amplifiers
Output
IN–
2.4 kΩ
VCC–
Component values shown are nominal.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
VCC– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 V
Supply voltage, VCC+ with respect to VCC– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±36 V
Input voltage (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Package thermal impedance, θJA (see Note 4): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. These voltage values are with respect to the midpoint between VCC+ and VCC–.
2. Differential voltages are at IN+ with respect to IN–.
3. Neither input must ever be more positive than VCC+ or more negative than VCC–.
4. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
recommended operating conditions
VCC
Supply voltage
Dual
supply voltage
Dual-supply
TA
Operating free-air
free air temperature
MIN
MAX
5
30
UNIT
V
VCC+
VCC–
2.5
15
V
–2.5
–15
V
MC3303
–40
85
MC3403
0
70
°C
electrical characteristics at specified free-air temperature, VCC+ = 14 V, VCC– = 0 V for MC3303,
VCC± = ±15 V for MC3403 (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
See Note 5
aV
Temperature coefficient
of input offset voltage
See Note 5
IIO
Input offset current
See Note 5
aI
Temperature coefficient
of input offset current
See Note 5
IIB
Input bias current
See Note 5
VICR
Common-mode
input voltage range‡
VOM
Peak
P
k output
t t
voltage swing
IO
IO
MC3303
TEST CONDITIONS†
MIN
MC3403
TYP
MAX
2
8
25°C
Full range
MIN
TYP
MAX
2
10
10
Full range
10
25°C
30
Full range
12
75
30
Full range
25°C
–0.2
Full range
50
–0.5
–0.2
–1
VCC–
to 12
VCC–
to 12.5
VCC–
to 13
VCC–
to 13.5
25°C
12
12.5
±12
±13.5
RL = 2 kΩ
25°C
10
12
±10
±13
RL = 2 kΩ
Full range
10
25°C
20
Full range
15
AVD
Large-signal
differential
g
g
voltage amplification
V RL = 2 kΩ
VO = ±10 V,
BOM
Maximum-output-swing
bandwidth
VOPP = 20 V, AVD = 1,
THD ≤ 5%, RL = 2 kΩ
B1
φm
Unity-gain bandwidth
ri
nA
pA/C
–0.5
–0.8
25°C
RL = 10 kΩ
50
200
50
mV
µV/°C
10
250
UNIT
µA
V
V
±10
200
20
200
V/mV
15
25°C
9
9
kHz
25°C
1
1
MHz
Phase margin
VO = 50 mV, RL = 10 kΩ
CL = 200 pF, RL = 2 kΩ
Input resistance
f = 20 Hz
25°C
ro
Output resistance
f = 20 Hz
25°C
CMRR
Common-mode
rejection ratio
VIC = VICRmin
25°C
kSVS
Supply voltage
sensitivity
(∆VIO/∆VCC)
VCC± = ±2.5 to ±15 V
25°C
IOS
Short-circuit
output current§
25°C
25°C
60°
0.3
60°
1
0.3
75
70
±10
90
70
30
150
±30
±45
±10
1
MΩ
75
Ω
90
dB
30
150
µV/V
±30
±45
mA
ICC
Total supply current
No load, See Note 5
25°C
2.8
7
2.8
7
mA
† All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. Full range for TA is
–40°C to 85°C for MC3303, and 0°C to 70°C for MC3403.
‡ The VICR limits are linked directly, volt-for-volt, to supply voltage; the positive limit is 2 V less than VCC+.
§ Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded.
NOTE 5: VIO, IIO, IIB, and ICC are defined at VO = 0 for MC3403 and VO = 7 V for MC3303.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
electrical characteristics, VCC+ = 5 V, VCC– = 0 V, TA = 25°C (unless otherwise noted)
TEST CONDITIONS†
PARAMETER
VIO
IIO
Input offset voltage
IIB
MC3303
MIN
TYP
MC3403
MAX
MIN
TYP
MAX
UNIT
VO = 2.5 V
VO = 2.5 V
10
2
10
75
30
50
nA
Input bias current
VO = 2.5 V
RL = 10 kΩ
–0.5
–0.2
–0.5
µA
VOM
Peak output voltage swing‡
RL = 10 kΩ,
VCC+ = 5 V to 30 V
AVD
Large-signal
g
g
differential voltage amplification
VO = 1
1.7
7 V to 3
3.3
3V
V, RL = 2 kΩ
kSVS
Supply-voltage
y
g sensitivity
y
(∆VIO/∆VCC±)
5 V to ±15 V
VCC± = ±2
±2.5
Supply current
VO = 2.5 V, No load
f = 1 kHZ to 20 kHZ
Input offset current
ICC
VO1/VO2
Crosstalk attenuation
3.3
3.5
3.3
VCC+
– 1.7
3.5
V
VCC+
– 1.7
20
200
20
200
150
2.5
7
120
mV
V/mV
150
2.5
7
120
µV/V
mA
dB
† All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified.
‡ Output will swing essentially to ground.
operating characteristics, VCC+ = 14 V, VCC– = 0 V for MC3303, VCC± = ±15 V for MC3403,
TA = 25°C, AVD = 1 (unless otherwise noted)
PARAMETER
TYP
UNIT
VI = ±10 V,
∆VO = 50 mV,
CL = 100 pF,
RL = 2 kΩ,
See Figure 1
0.6
V/µs
CL = 100 pF,
RL = 10 kΩ,
See Figure 1
0.35
µs
CL = 100 pF,
RL = 10 kΩ,
See Figure 1
0.35
µs
Overshoot factor
∆VO = 50 mV,
∆VO = 50 mV,
CL = 100 pF,
RL = 10 kΩ,
See Figure 1
20
%
Crossover distortion
VI(PP) = 30 mV,
VOPP = 2 V,
f = 10 kHZ
1
%
SR
Slew rate at unity gain
tr
tf
Rise time
Fall time
TEST CONDITIONS
PARAMETER MEASUREMENT INFORMATION
–
OUT
+
VI
CL = 100 pF
RL
Figure 1. Unity-Gain Amplifier
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
TYPICAL CHARACTERISTICS†
30
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
RL = 10 kΩ
TA = 25°C
25
20
15
10
5
0
0
2
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
VOPP – Maximum Peak-to-Peak Output Voltage – V
VOPP – Maximum Peak-to-Peak Output Voltage – V
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
4
6
8
10
12
14
16
30
25
20
15
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
10
5
VCC± = ±15 V
CL = 0
RL = 10 kΩ
TA = 25°C
See Figure 1
0
1k
10 k
100 k
f – Frequency – Hz
|VCC±| – Supply Voltage – V
Figure 3
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREQUENCY
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
VCC± = ±15 V
RL = 2 kΩ
TA = 25°C
See Figure 1
10
105
Output
Input Output Voltages – V
A VD – Large-Signal Differential Voltage Amplification – dB
Figure 2
106
104
103
102
ÎÎÎÎÎ
ÎÎÎÎÎ
VCC± = ±15 V
RL = 2 kΩ
TA = 25°C
10
1
1
10
100
1M
5
0
–5
Input
–10
1k
10 k
100 k
1M
0
f – Frequency – Hz
10
20
30
40
50
60
70
80
90
t – Time –µs
Figure 4
Figure 5
† Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
MC3303, MC3403
QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
SLOS101C – FEBRUARY 1979 – REVISED FEBRUARY 2002
TYPICAL CHARACTERISTICS†
INPUT BIAS CURRENT
vs
SUPPLY VOLTAGE
INPUT BIAS CURRENT
vs
FREE-AIR TEMPERATURE
ÎÎÎÎÎ
ÎÎÎÎÎ
250
VCC± = ±15 V
200
150
100
200
150
100
50
50
0
–75
ÎÎÎÎ
ÎÎÎÎ
TA = 25°C
I IB – Input Bias Current – mA
I IB – Input Bias Current – mA
250
0
–50
–25
0
25
50
75
100
125
0
2
TA – Free-Air Temperature – °C
4
6
8
10
12
14
16
|VCC±| – Supply Voltage – V
Figure 6
Figure 7
† Operation of the device at these or any other conditions beyond those indicated under ‘‘recommended operating conditions” is not implied.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
MC3303D
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3303DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3303DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3303DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3303N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
MC3303NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
MC3303PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3303PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3303PWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3303PWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403D
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
MC3403NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
MC3403NSLE
OBSOLETE
SO
NS
14
TBD
Call TI
MC3403NSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403NSRG4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403PWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
MC3403PWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
(1)
Lead/Ball Finish
MSL Peak Temp (3)
Call TI
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2006, Texas Instruments Incorporated