Surface Mount Monolithic Amplifier DC-3 GHz Features • Miniature SOT-89 package • Low noise figure, 2.4 dB typ. • Internally Matched to 50 Ohms • Wide bandwidth, DC to 3 GHz • Excellent package for heat dissipation, exposed metal bottom • Low thermal resistance for high reliability • Aqueous washable Gali S66+ CASE STYLE: DF782 Applications • Cellular • PCS • Communication receivers & transmitters +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications General Description Gali S66+ (RoHS compliant) is a wideband amplifier offering high dynamic range. Lead finish is SnAgNi. It has repeatable performance from lot to lot, and is enclosed in a SOT-89 package. It uses Darlington configuration and is designed to be rugged for ESD. simplified schematic and pin description RF-OUT and DC-IN RF IN 3 RF-OUT & DC-IN 4 2 GROUND 1 RF-IN GROUND Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”. GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. G M151107 EE-8572/B GALI-S66+ RS/YB/FL 150723 Page 1 of 4 Gali S66+ Monolithic InGaP HBT MMIC Amplifier Electrical Specifications at 25°C and 16mA, unless noted Parameter Min. Frequency Range* Typ. DC Gain Max. Units 3 GHz dB f=0.1 GHz — 21.6 — f=1 GHz — 20.3 — f=2 GHz 15 18.2 — f=3 GHz — 16.4 — Input Return Loss f= DC to 3 GHz Output Return Loss f= DC to 3 GHz dB 25 dB 20 Output Power @ 1 dB compression f=2 GHz 1.0 Output IP3 f=2 GHz 19.1 dBm Noise Figure f=2 GHz 2.4 dB 3.3 Recommended Device Operating Current — 16 Device Operating Voltage 3.0 3.5 dBm mA 4.0 V Device Voltage Variation vs. Temperature at 16 mA -2.1 mV/°C Device Voltage Variation vs. Current at 25°C 3.7 mV/mA Thermal Resistance, junction-to-case1 64 °C/W *Guaranteed specification DC-3 GHz. Low frequency cut off determined by external coupling capacitors. Absolute Maximum Ratings Parameter Ratings Operating Temperature -45°C to 85°C Storage Temperature -65°C to 150°C Operating Current 50mA Input Power 20dBm Note: Permanent damage may occur if any of these limits are exceeded. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 4 Gali S66+ Monolithic InGaP HBT MMIC Amplifier Product Marking 4 66 1 2 3 Markings in addition to model number designation may appear for internal quality control purposes. Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Performance data, graphs, s-parameter data set (.zip file) Case Style: DF782 Plastic package, exposed paddle, lead finish: tin-silver over nickel Tape & Reel: F55 7” reels with 20, 50, 100, 200, 500, 1K devices. Suggested Layout for PCB Design: PL-019 Evaluation Board: TB-409-S66+ Environmental Ratings: ENV08T2 Recommended Application Circuit R BIAS R bias (R equired) V cc Vcc “1%” Res. Values (ohms) for Optimum Biasing 7 8 9 10 11 12 13 14 15 16 17 18 19 20 187 243 301 374 432 499 562 619 681 750 806 866 931 976 C bypas s C block IN 4 Ibias R F C (Optional) 3 Vd 1 2 OUT C block Test Board includes case, connectors, and components (in bold) soldered to PCB Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 4 Gali S66+ Monolithic InGaP HBT MMIC Amplifier ESD Rating Human Body Model (HBM): Class 1C (1000v to < 2000v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100V) in accordance with ANSI/ESD STM 5.2 - 1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C No. Test Required Condition Standard Quantity 1 Visual Inspection Low Power Microscope Magnification 40x MIP-IN-0003 (MCT spec) 45 units 2 Electrical Test Room Temperature SCD (MCL spec) 45 units 3 SAM Analysis Less than 10% growth in term of delamination J-Std-020C (Jedec Standard) 45 units 4 Moisture Sensitivity Level 1 Bake at 125°C for 24 hours Soak at 85°C/85%RH for 168 hours Reflow 3 cycles at 260°C peak J-Std-020C (Jedec Standard) 45 units MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 4