ETC1 CCPB-2-70CF Cubefuse compact circuit protector base (ccpb) Datasheet

Technical Data 1161
Effective April 2017
Supersedes April 2016
BUSSMANN
SERIES
CUBEFuse™ Compact Circuit Protector Base (CCPB)
Features and benefits:
2011/65/EU
•
Uses finger-safe, current-limiting Class CF
CUBEFuse with Class J performance available,
time-delay or fast-acting versions from 1 to 100
amps*
•
Patented ampacity rejection feature helps
prevent overfusing
•
High 200kA short-circuit current ratings
•
Disconnect rated to provide means for load
isolation
•
All versions are full voltage rated at 600Vac
•
125Vdc rated for 80A and below
•
UL 98 Listed and suitable for branch circuit
disconnect
•
1-, 2- and 3-pole versions are horsepower rated
•
Listed to UL and cULus
•
Open fuse indication light per pole
•
Additional open fuse indication can be provided
by using the time-delay indicating CUBEFuse
version
•
Built-in switch/fuse interlock prohibits fuse
removal while energized
•
Permanent lockout/tagout provisions
•
Lock-On provision available when used in the
Bussmann series Quik-Spec Coordination
Panelboard (QSCP)
* See data sheet 9000 for time-delay CUBEFuse and data
sheet 2147 for fast-acting CUBEFuse specifications.
Product description:
The revolutionary Bussmann™ series Compact
Circuit Protector Base (CCPB) with CUBEFuse™
is designed as a fused branch circuit disconnect
switch for the Bussmann series Quik-Spec™
Coordination Panelboard. The CCPB with
CUBEFuse simplifies selective coordination
and lockout/tagout provisions allow for isolation
of individual branch circuit loads for safe work
practices.
Technical Data 1161
Effective April 2017
CUBEFuse Compact Circuit Protector Base (CCPB)
for Quik–Spec™ Coordination Panelboards
Specifications:
Switch ampacity and rejection breaks
•
15A, 20A, 30A, 40A, 50A, 60A, 70A, 90A and 100A
Poles
•
1-, 2- and 3-pole versions
Volts
•
600Vac (or less)
•
125Vdc (15, 20, 30, 40, 70 and 90 amp switches with ≤ 80A fuse)
Agency information
•
UL 98 Listed, File E302370, Guide WHTY
•
cULus to CSA Standard 22.2 No. 4, File E302370, Guide WHTY7
•
CE compliant
•
RoHS compliant
Terminals
Lineside bolt-on bus connector and torque
•
Bolt-mounted design into Quik-Spec Coordination Panelboard bus
•
#10-32-UNC Hex flange Phillips screw; 25 Lb-In (2.8 N•m)
1-Pole
2-Pole
3-pole
CCPB-1-_CF
CCPB-2-_CF
CCPB-3-_CF
Loadside box lug terminal and torque
•
•
15-60A:
• 18 to 10 AWG (1 to 6mm2) single or dual rated (same size
wire), solid or stranded – 75°C or higher - Cu only;
20 Lb-In (3.4 N•m)
•
8 to 6 AWG (10 to 16mm2) single or dual rated (same size wire),
solid or stranded – 75°C or higher - Cu only;
35 Lb-In (5.8 N•m)
•
4 AWG (25mm2) single – 75°C or higher - Cu only;
35 Lb-In (5.8 N•m)
Lineside bolt-on
bus connector
100A:
• 18 to 10 AWG (1 to 6mm2) single, solid or stranded –
75°C or higher - Cu only; 25 Lb-In (2.82 N•m)
•
8 to 1 AWG (10 to 45mm2) single stranded –
75°C or higher - Cu only; 40 Lb-In (4.52 N•m)
•
6 AWG (16mm2) dual stranded (same size wire) –
75°C or higher Cu only; 45 Lb-In (5.08 N•m)
Switch ON and OFF
symbols
Lockout/tagout provision
Switch handle
Loadside fork terminal
•
Max. 30A suitable for use with #8-32UNC screw
Lockout/tagout
•
Local open fuse
indication light
4mm shank lock
Local open fuse indication
•
CUBEFuse base
Light illumination requires closed circuit and minimum 90V
operating voltage
Shipping weight
•
2.03 lbs per carton
Carton quantity
•
6 poles
Environmental data
Storage and operating temperature -20°C to 75°C**
** For fuse performance under or above 25°C, consult fuse performance derating
charts.
2
Eaton.com/bussmannseries
Loadside
box lug
terminal
Loadside
fork
terminal
Technical Data 1161
CUBEFuse Compact Circuit Protector Base (CCPB)
for Quik–Spec™ Coordination Panelboards
Effective April 201
Catalog numbers:
CCPB
part numbers
CCPB-1-15CF
CCPB-2-15CF
Poles
1
2
CCPB-3-15CF
3
600Vac
CCPB-1-20CF
CCPB-2-20CF
1
2
600Vac,
125Vdc
CCPB-3-20CF
3
600Vac
CCPB-1-30CF
CCPB-2-30CF
1
2
600Vac,
125Vdc
CCPB-3-30CF
3
600Vac
CCPB-1-40CF
CCPB-2-40CF
1
2
600Vac,
125Vdc
CCPB-3-40CF
3
600Vac
CCPB-1-50CF
CCPB-2-50CF
1
2
600Vac,
125Vdc
CCPB-3-50CF
3
600Vac
CCPB-1-60CF
CCPB-2-60CF
1
2
600Vac,
125Vdc
CCPB-3-60CF
3
600Vac
CCPB-1-70CF
CCPB-2-70CF
1
2
600Vac,
125Vdc
CCPB-3-70CF
3
600Vac
CCPB-1-90CF
CCPB-2-90CF
1
2
600Vac,
125Vdc
CCPB-3-90CF
3
600Vac
CCPB-1-100CF
CCPB-2-100CF
1
2
600Vac,
125Vdc†††
CCPB-3-100CF
3
600Vac
*
**
†
††
†††
Voltage
rating
Accepts
CUBEFuse
amp range
600Vac,
125Vdc
Typical installed fuse amp range
Time-delay
Time-delay
Fast-acting
non-indicating
indicating*
non-indicating**
Max.
fuse
amps†
SCCR
1 to 15
TCF1RN,
TCF3RN,
TCF6RN,
TCF10RN,
TCF15RN
TCF6,
TCF10,
TCF15
FCF1RN,
FCF3RN,
FCF6RN,
FCF10RN,
FCF15RN
15A
200kA
AC
100kA
DC
1 to 20
TCF17-1/2RN,
TCF20RN
TCF17-1/2, TCF20
FCF20RN
20A
200kA
AC
100kA
DC
1 to 30
TCF25RN,
TCF30RN
TCF25,
TCF30
FCF25RN,
FCF30RN
30A
200kA
AC
100kA
DC
1 to 40
TCF35RN,
TCF40RN
TCF35,
TCF40
FCF35RN,
FCF40RN
40A
200kA
AC
100kA
DC
1 to 50
TCF45RN,
TCF50RN
TCF45,
TCF50
FCF45RN,
FCF50RN
50A
200kA
AC
100kA
DC
1 to 60
TCF60RN
TCF60
FCF60RN
60A
200kA
AC
100kA
DC
1 to 70
TCF70RN
TCF70
FCF70RN
70A
200kA
AC
100kA
DC
1 to 90
TCF90RN
TCF90
FCF80RN,
FCF90RN
90A
200kA
AC
100kA
DC
1 to 100
TCF100RN
TCF100
FCF100RN
100A
200kA
AC
Hp ratings
(Vac)††
0.5Hp@120V
1.5Hp@240V
3Hp@240V
5Hp@480V
7.5Hp@600V
0.75Hp@120V
2Hp@240V
3Hp@240V
7.5Hp@480V
10Hp@600V
1.5Hp@120V
3Hp@240V
5Hp@240V
15Hp@480V
10Hp@600V
2.0Hp@120V
3Hp@240V
7.5Hp@240V
20Hp@480V
10Hp@600V
3.0Hp@120V
5Hp@240V
7.5Hp@240V
20Hp@480V
10Hp@600V
3.0Hp@120V
7.5Hp@240V
7.5Hp@240V
20Hp@480V
10Hp@600V
3.0Hp@120V
7.5Hp@240V
15Hp@240V
30Hp@480V
40Hp@600V
5.0Hp@120V
10Hp@240V
20Hp@240V
50Hp@480V
40Hp@600V
5.0Hp@120V
10Hp@240V
20Hp@240V
50Hp@480V
40Hp@600V
1A and 3A indicating CUBEFuse not available. Correct fit with CCPB disconnect requires indicating CUBEFuse with date code R38 or later.
Do not use UPS/Critical Application fast-acting FCF with motors.
Any fuse with an amp rating less than or equal to the max fuse rating may be used. E.g., TCF15 may be used with CCPB-1-20CF.
Indiacting or non-indicating time-delay CUBEFuse only.
125Vdc only applies up to 80A.
Eaton.com/bussmannseries
3
Technical Data 1161
Effective April 2017
CUBEFuse Compact Circuit Protector Base (CCPB)
for Quik–Spec™ Coordination Panelboards
Dimensions — in (mm):
15-60A
3.9
(99.4)
1.0
(25.4)
2.0
(50.7)
2.7
(69.1)
2.9
(73.5)
3.0
(75.8)
0 .5
(12.9)
Ø.2
(5.08)
70-100A
5.3
(133.3)
1.0
(25.4)
2.0
(50.7)
3.0
(75.8)
3.4
(86.0)
2.7
(69.6)
Ø0.2
(5.08)
0.03
(0.84)
0.54
(13 72)
For details on the CCPB and its use in the Quik-Spec Coordination Panelboard, see data sheet 1160.
4
Eaton.com/bussmannseries
Technical Data 1161
CUBEFuse Compact Circuit Protector Base (CCPB)
for Quik–Spec™ Coordination Panelboards
Effective April 201
Motor sizing table:
Low-Peak™ TCF_ and TCT_RN time-delay Class CF fuses
Voltage
115Vac, 1-Phase
230Vac,1-Phase
200Vac, 3-Phase
208Vac, 3-Phase
Motor
size (Hp)
Motor
FLA (amps)
Optimal
protection
(amps)
0.167
4.4
10
10
10
0.25
5.8
10
15
15
0.333
7.2
15
15
15
1
Code
max
(amps)
Heavy
start
(amps)
0.5
9.8
15
20
20
0.75
13.8
25
25
30
Voltage
230Vac, 3-Phase
Motor
FLA (amps)
Optimal
protection
(amps)
0.5
2.2
6
6
0.75
3.2
6
6
6
4.2
10
10
10
Motor
size (Hp)
Code
max
(amps)
Heavy
start
(amps)
6
1.5
6
10
15
15
2
6.8
15
15
15
1
16
25
30
35
3
9.6
15
20
20
1.5
20
30
35
45
5
15.2
25
30
30
2
24
40
45
50
7.5
22
35
40
45
3
34
50
60
N/A
20**
54
90
100
N/A
5**
56
90
100
N/A
0.5
1.1
3
3
3
1.6
3
3
3
0.167
2.2
6
6
6
0.75
0.25
2.9
6
6
6
1
2.1
6
6
6
0.333
3.6
6
10
10
1.5
3
6
6
6
0.5
4.9
10
10
10
2
3.4
6
6
6
3
4.8
10
10
10
5
7.6
15
15
15
7.5
11
17.5
20
20
0.75
6.9
15
15
15
1
8
15
15
17.5
1.5
10
15
20
20
2
12
20
25
25
10
14
25
25
30
3
17
25
30
35
15
21
35
40
45
27
40
50
60
460Vac, 3-Phase
5
28
45
50
60
20
7.5
40
60
N/A
N/A
50**
65
100
N/A
N/A
10**
50
80
90
N/A
0.5
0.9
3
3
3
0.5
2.5
6
6
6
0.75
1.3
3
3
3
1.7
3
3
3
6
0.75
3.7
6
10
10
1
1
4.8
10
10
10
1.5
2.4
6
6
1.5
6.9
15
15
15
2
2.7
6
6
6
2
7.8
15
15
17.5
3
3.9
6
10
10
575Vac, 3-Phase
3
11
17.5
20
20
5
6.1
10
15
15
5
17.5
30
35
35
7.5
9
15
20
20
7.5
25.3
40
45
50
10
11
17.5
20
20
20**
62.1
100
N/A
N/A
40**
41
70
80
80
0.5
2.4
6
6
6
0.75
3.5
6
10
10
1
4.6
10
10
10
1.5
6.6
10
15
15
2
7.5
15
15
15
3
10.6
17.5
20
20
5
16.7
25
30
35
7.5
24.2
40
45
50
20**
59.4
90
N/A
N/A
Note: Use Code Max column for low to moderate reverse/jog/plug applications.
Heavy Start permitted only if Code Max does not allow motor start-up.
* Based on motor FLA from NEC® tables 430.248 and 430.250.
Eaton.com/bussmannseries
5
CUBEFuse Compact Circuit Protector Base (CCPB)
for Quik–Spec™ Coordination Panelboards
Technical Data 1161
Effective April 2017
The only controlled copy of this Data Sheet is the electronic read-only version located on the Eaton Network Drive. All other copies of this document
are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help
the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue
or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this
bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton.com/bussmannseries
© 2017 Eaton
All Rights Reserved
Printed in USA
Publication No. 1161 - BU-SB15190
April 2017
Eaton, Bussmann, Quik-Spec and CUBEfuse
are valuable trademarks of Eaton in the U.S.
and other countries. You are not permitted to
use the Eaton trademarks without prior written consent of Eaton.
CSA is a registered trademark of the Canadian
Standards Group.
NEC is a registered trademark of the National
Fire Protection Association, Inc.
NEMA is a registered trademark of the
National Electrical Manufacturers Association.
UL is a registered trademark of the
Underwriters Laboratories, Inc.
Follow us on social media to get the
latest product and support information.
Similar pages