11 MC54/74F365 MC54/74F366 HEX BUFFER/DRIVER GATED ENABLE NONINVERTING AND INVERTING, 3-STATE F365 HEX BUFFER/DRIVER GATED ENABLE NONINVERTING, 3-STATE CONNECTION DIAGRAM MC54/74F365 I O I O I O 14 13 12 11 10 9 VCC OE2 16 15 F366 HEX BUFFER/DRIVER GATED ENABLE INVERTING, 3-STATE FAST SCHOTTKY TTL 1 2 3 4 5 6 7 8 OE1 I O I O I O GND J SUFFIX CERAMIC CASE 620-09 MC54/74F366 O I O I O 14 13 12 11 10 9 VCC OE2 16 15 16 I 1 N SUFFIX PLASTIC CASE 648-08 16 1 1 2 3 4 5 6 7 8 OE1 I O I O I O GND 16 FUNCTION TABLE 1 Inputs D SUFFIX SOIC CASE 751B-03 Outputs OE1 OE2 I O O L L L L H L L H H L X H X Z Z H X X Z Z ORDERING INFORMATION H = HIGH Voltage Level L = LOW Voltage Level X = Don’t Care Z = High Impedance MC54FXXXJ MC74FXXXN MC74FXXXD Ceramic Plastic SOIC GUARANTEED OPERATING RANGES Symbol Parameter VCC Supply Voltage TA Operating Ambient Temperature Range IOH IOL Output Current — High Output Current — Low Min Typ 54,74 4.5 5.0 5.5 V 54 –55 25 125 °C 74 0 25 70 54 –12 74 –15 54 48 74 64 FAST AND LS TTL DATA 4-163 Max Unit mA mA MC54/74F365 • MC54/74F366 DC CHARACTERISTICS OVER OPERATING TRMPERATURE RANGE (unless otherwise specified) Limits Symbol Parameter VIH Input HIGH Voltage VIL Input LOW Voltage VIK Input Clamp Diode Voltage VOH Output HIGH Voltage VOL Output LOW Voltage Min Unit Typ Max Test Conditions 2.0 V Guaranteed Input HIGH Voltage 0.8 V Guaranteed Input LOW Voltage –1.2 V IIN = –18 mA VCC = MIN 54,74 2.4 3.4 V IOH = –3.0 mA VCC = 4.5 V 74 2.7 3.4 V IOH = –3.0 mA VCC = 4.75 V 54 2.0 V IOH = –12 mA VCC = 4.5 V 74 2.0 V IOH = –15 mA VCC = 4.5 V 54 0.35 0.55 V IOL = 48 mA VCC = MAX 74 0.4 0.55 V IOL = 64 mA IOZH Output OFF Current–HIGH 50 µA VOUT = 2.7 V VCC = MAX IOZL Output OFF Current–LOW –50 µA VOUT = 0.5 V VCC = MAX IIH Input HIGH Current IIL Input LOW Current IOS Output Short Circuit Current (Note 2) F365 ICC F366 –100 20 µA VIN = 2.7 V VCC = MAX 100 µA VIN = 7.0 V VCC = 0 V –20 µA VIN = 0.5 V VCC = MAX –225 mA VOUT = GND VCC = MAX mA VCC = MAX ICCH 35 ICCL 62 ICCZ 48 ICCH 25 ICCL 62 ICCZ 48 NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable device type. 2. Not more than one output should be shorted at a time, nor for more than 1 second. AC CHARACTERISTICS Symbol Parameter 54/74F 54F 74F TA = +25°C TA = –55°C to +125°C TA = 0°C to +70°C VCC = +5.0 V VCC = 5.0 V ± 10% VCC = 5.0 V ± 10% CL = 50 pF CL = 50 pF CL = 50 pF Min Typ Max Min Max Min Max Unit 2.0 4.5 6.5 2.0 8.0 2.0 7.0 ns 3.0 5.5 7.0 3.0 8.5 3.0 7.5 2.0 5.0 6.5 2.0 8.5 2.0 7.5 In to On 1.0 3.0 5.0 1.0 6.5 1.0 5.5 tPZH Output Enable Time 3.0 6.5 9.5 3.0 11 3.0 10 tPZL to HIGH and LOW Level 4.0 6.0 9.0 4.0 10.5 4.0 9.5 tPHZ Output Disable Time 2.5 4.5 6.5 2.5 8.0 2.5 7.0 tPLZ from HIGH and LOW Level 1.5 4.0 6.0 1.5 7.5 1.5 6.5 tPLH Propagation Delay tPHL In to On tPLH Propagation Delay tPHL F365 F366 FAST AND LS TTL DATA 4-164 ns ns ns