GBJ50005A THRU GBJ5010A SINGLE PHASE 50.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER Features GBJ · Glass passivated die construction · Low forward voltage drop · High current capability · High surge current capability .150(3.8) .134(3.4) .215(5.2) .196(4.8) .800(20.3) · Plastic material-UL flammability 94V-0 + ~ .106(2.7) .096(2.3) Mechanical Data .090(2.3) .078(2.0) · Case: Molded plastic, GBJ · Terminals: Plated Leads Solderable per .043(1.1) .035(0.9) .433(11) .354(9.0) · · · · .189(4.8) .173(4.4) 1.193(30.3) 1.169(29.7) MIL-STD-202, Method 208 Polarity: As Marked on Case Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version ~ .787(19.7) .441(11.2) .425(10.8) .165(4.2) .150(3.8) ~ ~ .110(2.8) .094(2.4) .023(0.6) .303(7.7) .287(7.3) .303(7.7) .287(7.3) + .706(18.0) .626(16.0) .184(3.4) .122(3.1) - dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM RMS Reverse Voltage VRMS Average Rectified Output Current (Note 1)@TC =90 ℃ IF(AV) GBJ GBJ GBJ GBJ GBJ GBJ GBJ 50005A 5001A 5002A 5004A 5006A 5008A 5010A UNITS 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VDC 50.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 320 A I2t Rating for Fusing (t < 8.3ms) I 2t 424.96 A2s VFM 1.1 V IR 5.0 500 uA CJ 75 pF Between junction and ambient, Without heatsink RθJA 22 Between junction and case, With heatsink RθJC 0.8 TJ,TSTG -55to+150 Forward Voltage per element Peak Reverse Current At Rated DC Blocking Voltage @IF=25A @TA =25 ℃ @TA =125 ℃ Typical Junction Capacitance per leg Operating and Storage Temperature Range ℃/W ℃ NOTES: 1.Device mounted on 300mm*300mm*1.6mm cu plate heatsink. version:02 1 of 3 www.dyelec.com AVERAGE FORWARD RECTIFIED CURRENT (A) GBJ50005A THRU GBJ5010A 60.0 with heatsink 45.0 30.0 Single Phase Half Wave 60Hz 15.0 without heatsink 0 150 100 50 200 I (AV), 0 IF, INSTANTANEOUS FORWARD CURRENT (A) Fig. 1 Output Current Derating Curve Fig. 3 Maximum Peak Forward Surge Current (per leg) 10 1 TA = 25 C ° Pulse Width = 300 µs 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 480 420 360 300 240 180 120 TA = 25°C Single Half Sine-Wave 60 Pulse Width = 8.3ms (JEDEC Method) 0 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 Typical Junction Capacitance INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IFSM, PEAK FORWARD SURGE CURRENT (A) 100 VF, INSTANTANEOUS FORWARD VOLTAGE (V) TC ,CASE TEMPERATURE( ° C) 1 Fig. 2 Typical Forward Characteristics (per leg) 10 1.0 T A=25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.5 TYPICAL REVERSE CHRACTERISTICS INVSTANTANEOUS REVERSE CURRENT (µA) 100 Tj=150℃ 10 1.0 Tj=25℃ 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK INVERSE VOLTGE (V) version:02 2 of 3 www.dyelec.com GBJ50005A THRU GBJ5010A Important Notice and Disclaimer •Reproducing and modifying information of the document is prohibited without permission from DIYI. • DIYI reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. •DIYI disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. •DIYI does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Applications shown on the here in document are examples of standard use and • operation. Customers are responsible in comprehending the suitable use in particular applications. DIYI makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. •The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify DIYI for any damages resulting from such improper use or sale. •Since DIYI uses lot number as the tracking base, please provide the lot number for tracking when complaining. version:02 3 of 3 www.dyelec.com