DF005S thru DF10S Surface Mount Glass Passivated Bridge Rectifiers REVERSE VOLTAGE 50 TO 1000 VOLTS FORWARD CURRENT 1.0 AMPERE Features: *For Surface Mount Application *Glass Passivated Chip *Low Reverse Leakage Current *Low Forward Voltage Drop And High Current Capability *Plastic Meterial Has UL Flammability Classification 94V-0 Mechanical Data DF-S *Case : Molded Plastic *Polarity :As marked on Body *Weight : 0.02 Ounce ,0.38 grams DF-S Outline Dimensions G + D E A B ~ ~ C L H J K WEITRON http://www.weitron.com.tw DF -S Dim A B C D E G H J K L Min 7.40 6.20 0.009 0.076 1.02 8.13 2.40 5.00 1.00 Max 7.90 6.50 0.25 0.33 10.40 1.53 8.51 3.40 5.20 1.20 DF005S thru DF10S Maximum Ratings and Electrical Characteristics Rating 25 C Ambient Temperature Unless Otherwise Specified. Single Phase Half Wave, 60Hz , Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Characteristics Symbol DF005S DF01S DF02S DF04S DF06S DF08S DF10S Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TC=40 C IF(AV) 1.0 A IFSM 50 A VF 1.10 V Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous At 1.0A DC Maximum DC Reverse Current @Tj=25 C At Rated DC Blocking Voltage @Tj=125 C IR 1.0 500 uA 40 PF C/W Operating Temperature Range CJ R qJA TJ -55 to+150 C Storage Temperature Range TSTG -55 to+150 C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) 25 NOTES: 1.Measured at 1.0MHz applied reverse voltage of 4.0V DC. 2.Thermal Resistance from junction to ambient mounted on P.C.B. with 13*13mm Copper pads. WEITRON http://www.weitron.com.tw DF005S thru DF10S 0.8 0.6 0.4 0.2 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.1 20 40 60 80 100 120 140 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD S URGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 50 40 30 20 10 0 Single Half-Sine-Wave (JEDEC METHOD) 1 2 5 AMBIENT TEMPERATURE , C 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 100 10 INSTANTANEOUS FORWARD CURRENT ,(A) CAPACITANCE , (pF) 20 10 NUMBER OF CYCLES AT 60Hz 10 1.0 TJ = 25 C 0.1 PULSE WIDTH 300us 2% DUTY CYCLE TJ = 25 C, f = 1MHz 1.0 0.1 1.0 4.0 .01 100 10.0 0 REVERS E VOLTAGE , VOLTS 0.4 0.2 0.6 FIG.5 - TYPICAL REVERS E CHARACTERIS TICS INSTANTANEOUS REVERSE CURRENT ,(uA) TJ = 125 C 10 1.0 TJ = 25 C 0.1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERS E VOLTAGE, (%) WEITRON http://www.weitron.com.tw 1.0 1.2 1.4 1.6 INSTANTANEOUS F ORWARD VOLTAGE , VOLTS 100 0.01 0.8 140 1.8