DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM AlInGaP : DWx-PKG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED using thin film technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Superior corrosion resistance Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Viewing Angle˚ Color Luminous Intensity @ IF = 50mA Min. Typ. Max. Flux @ IF=50mA,mlm Typ. DWS-PKG-W2X-1 Super Red, 632nm 120 1400.0 2125.0 2850.0 5750.0 DWR-PKG-X2Y1-1 Red, 620nm 120 2240.0 2850.0 3550.0 7700.0 DWA-PKG-X2Y-1 Amber, 617nm 120 2240.0 3550.0 4500.0 9600.0 DWY-PKG-X2Y-1 Yellow, 589nm 120 2240.0 3550.0 4500.0 9600.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf binning is also available upon request. Binning scheme is as per following table. Electrical Characteristics at Tj=25˚C Vf @ If = 50mA Part Number Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) DWx-PKG 2.05 2.20 2.50 12 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. 2 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Absolute Maximum Ratings Maximum Value Unit DC forward current 70 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +115 ˚C Storage temperature -40 … +125 ˚C 200 mW 300 K/W 130 K/W LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) Characteristics Symbol Temperature coefficient of O dom (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) TC O Part Number dom (typ) TCV TCIV IF = 50mA; 0 ˚C <= T <= 100 ˚C 3 Value DWS-PKG 0.04 DWR-PKG 0.05 DWA-PKG 0.06 DWY-PKG 0.08 DWS-PKG DWR-PKG -2.2 -2.2 DWA-PKG -2.0 DWY-PKG -1.9 DWS-PKG -0.4 DWR-PKG -0.5 DWA-PKG -0.7 DWY-PKG -0.9 Unit nm / K mV / K %/K 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Wavelength Grouping at Tj= 25˚C Color Group Wavelength distribution (nm) DWS, Super Red Full 625 - 640 DWR; Red Full 620 - 630 DWA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 585 - 594 X 585 - 588 Y 588 - 591 Z 591 - 594 DWY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm at a drive current of 50mA Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Y1 2850.0...3550.0 Y2 3550.0...4500.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf @ If = 50mA Forward Voltage (V) V51 2.05 ... 2.20 V52 2.20 ... 2.35 V53 2.35 ... 2.50 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing for special part number to incorporate Vf binning. 4 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Forward Voltage Vsvs Forward Current Forward Current Forward Voltage Forward Current vs Forward Voltage 1.2 1.6 1.2 2.3 7070 1.4 1 1 1.2 0.8 0.81 60 60 2.2 50 50 Forward Current; mA Forward Voltage; V Forward Current; mA RelativeIntensity; Intensity;Normalized Normalized at at50mA 50mA Relative RelativeIntensity; Normalizedat 50mA Relative Luminous Intensity Vs Forward Current Relative Intensity Vs Forward Forward Current Relative Intensity Vs Current 0.6 0.8 0.6 0.6 0.4 0.4 0.4 0.2 0.2 0.2 0 00 0 00 10 10 10 20 20 20 30 30 30 40 40 40 50 50 50 60 60 60 Forward Current, mA Forward Current, Current, mA mA Forward 70 70 70 Maximum Current Vs Ambient Temperature Maximum Current Current Vs Ambient Ambient Temperature Maximum Vs Multiple X-Y Plot Temperature Variables Allowable Forward Current, mA Relative Intensity Relative Intensity Forward Current, Forward Current, mA Forward Current, mAmA 30 302 20 20 1.910 10 1.8 0 80 80 80 80 80 80 7080 70 70 70 60 2.140 40 Col_18 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 010 10 0 10 20 30 40 50 60 70 80 90 100 000 10 20 20Ambient 304040 4050Temperature 50 60 70 90 80100 90110 100 3030 60 60 70 80 120 000 10 10 20 50 70 80 90 100 0 1.7 0 1.7 1 1000 10.9 1 1.8 1.9 1.8 20 1.9 2 2.1 2.2 2.3 80 2.1 60 2.2 2.3 Forward Voltage; V Forward ForwardCurrent, Voltage;mA V Relative Intensity Vs Wavelength Multiple X-Y Relative Intensity Vs Plot Wavelength Variables 0.9 0.9 0.8 Yellow 0.7 0.8 0.8 0.6 0.7 0.7 100 0.5 0.6 0.6 Yellow 0.4 0.5 0.5 0.3 0.4 0.4 10 0.2 0.3 0.3 0.1 0.2 0.2 0.1 0 0.1 1 500 00 1 500 450 Super Amber Amber Red Red Ambe Super Red Red 550 550 550 AmbientCol_17 Temperature Ambient Temperature 600 650 700 Wavelength; 600 10 700 650 650 nm750 750 100 750 850 Duty Ratio, nm % Wavelength; Wavelength Radiation Pattern Allowable Forward Current Vs Duty ratio 30° 1000 Allowable Forward Current; mA 40 2 20° 10° 0° 1.0 40° 0.8 100 10 50° 0.6 60° 0.4 70° 0.2 80° 1 1 10 90° 100 0 Duty Ratio, % 5 14/10/2014 V11.0 Yellow DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination DomiLED • AllnGaP : DWx-PKG Package Outlines TM Material Material Lead-frame Cu Alloy With Au Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone resin Soldering Leads Au Plating 6 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Recommended Solder Pad 7 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Packaging Specification 9 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 14/10/2014 V11.0 DOMINANT TM AlInGaP : DWx-PKG Opto Technologies Innovating Illumination Revision History Page 2, 5 Subjects Add Typical Total Flux Value Add graph “Allowable Forward Current vs Duty Ratio” Update Operating Temperature Date of Modification 09 Mar 2011 2 Add part no: DWS-PKG-W2X-1 05 Apr 2011 2 Update Operating Temperature 05 Jul 2011 1, 2, 4 Add features Update Vf Binning 13 Dec 2011 5 Update graph: Relative Intensity Vs Forward Current 06 Nov 2012 1 Update Product Photo 19 Apr 2012 6 Update Package Outline 05 Sep 2014 1 Update Product Photo 09 Sep 2014 4 Update Vf Binning Naming 14 Oct 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 14/10/2014 V11.0 DOMINANT TM Opto Technologies AlInGaP : DWx-PKG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM