H 14.2 mm (0.56 inch) Seven Segment Displays HDSP-530X Series HDSP-532X Series HDSP-550X Series HDSP-552X Series HDSP-560X Series HDSP-562X Series HDSP-570X Series HDSP-572X Series HDSP-H15X Series Technical Data Features • Industry Standard Size • Industry Standard Pinout 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers • Choice of Colors Red, AlGaAs Red, High Efficiency Red, Yellow, Green • Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast ± 50° Viewing Angle • Design Flexibility Common Anode or Common Cathode Single and Dual Digits Right Hand Decimal Point ± 1. Overflow Character • Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display • High Light Output • High Peak Current • Excellent for Long Digit String Multiplexing • Intensity and Color Selection Option See Intensity and Color Selected Displays Data Sheet • Sunlight Viewable AlGaAs Description The 14.2 mm (0.56 inch) LED seven segment displays are designed for viewing distances up to 7 metres (23 feet). These devices use an industry standard size package and pinout. Both the numeric and ± 1 overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. Devices Red HDSP- AlGaAs Red HDSP-[1] HER HDSP-[1] Yellow HDSP- Green HDSP- 5301 H151 5501 5701 5601 Common Anode Right Hand Decimal A 5303 H153 5503 5703 5603 Common Cathode Right Hand Decimal B 5307 H157 5507 5707 5607 Common Anode ± 1. Overflow C 5308 H158 5508 5708 5608 Common Cathode ± 1. Overflow D 5321 5521 5721 5621 Two Digit Common Anode Right Hand Decimal E 5323 5523 5723 5623 Two Digit Common Cathode Right Hand Decimal F Description Package Drawing Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet for low current operation. 3-84 5963-7388E These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current design. The low current displays are ideal for portable applications. For additional information see the Low Current Seven Segment Displays data sheet. Package Dimensions PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A CATHODE e CATHODE d ANODE[3] CATHODE c CATHODE DP CATHODE b CATHODE a ANODE[3] CATHODE f CATHODE g B ANODE e ANODE d CATHODE[4] ANODE c ANODE DP ANODE b ANODE a CATHODE[4] ANODE f ANODE g C CATHODE c ANODE c, d CATHODE b ANODE a, b, DP CATHOPDE DP CATHODE a ANODE a, b, DP ANODE c, d CATHODE d NO PIN FUNCTION D ANODE c CATHODE c, d ANODE b CATHODE a, b, DP ANODE DE ANODE a CATHODE a, b, DP CATHODE c, d ANODE d NO PIN NOTES: 1. ALL DIMENSIONS IN MILLIMETRES (INCHES). 2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. E E CATHODE NO. 1 D CATHODE NO. 1 C CATHODE NO. 1 DP CATHODE NO. 1 E CATHODE NO. 1 D CATHODE NO. 2 G CATHODE NO. 2 C CATHODE NO. 2 DP CATHODE NO. 2 B CATHODE NO. 2 A CATHODE NO. 2 F CATHODE NO. 2 DIGIT NO. 2 ANODE DIGIT NO. 1 ANODE B CATHODE NO. 1 A CATHODE NO. 1 G CATHODE NO. 1 F CATHODE NO. 1 F E ANODE NO. 1 D ANODE NO. 1 C ANODE NO. 1 DP ANODE NO. 1 E ANODE NO. 2 D ANODE NO. 2 G ANODE NO. 2 C ANODE NO. 2 DP ANODE NO. 2 B ANODE NO. 2 A ANODE NO. 2 F ANODE NO. 2 DIGIT NO. 2 CATHODE DIGIT NO. 1 CATHODE B ANODE NO. 1 A ANODE NO. 1 G ANODE NO. 1 F ANODE NO. 1 3. REDUNDANT ANODES. 4. REDUNDANT CATHODES. 5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY. 3-85 Internal Circuit Diagram Absolute Maximum Ratings Description Red HDSP-5300 Series AlGaAs Red HDSP-H150 Series HER HDSP-5500 Series Yellow HDSP-5700 Series Green HDSP-5600 Series Units Average Power per Segment or DP 82 96 105 80 105 mW Peak Forward Current per Segment or DP 150[1] 160[3] 90[5] 60[7] 90[9] mA DC Forward Current per Segment or DP 25[2] 40[4] 30[6] 20[8] 3010] mA -40 to +100 -20 to +100[11] Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Lead Solder Temperature for 3 Seconds (1.60 mm [0.063 in.] below seating plane) Notes: 1. See Figure 1 to establish pulsed conditions. 2. Derate above 80°C at 0.63 mA/°C. 3. See Figure 2 to establish pulsed conditions. 4. Derate above 46°C at 0.54 mA/°C. 5. See Figure 7 to establish pulsed conditions. 6. Derate above 53°C at 0.45 mA/°C. 3-86 -40 to +100 °C -55 to +100 °C 3.0 V 260 °C 7. See Figure 8 to establish pulsed conditions. 8. Derate above 81°C at 0.52 mA/°C. 9. See Figure 9 to establish pulsed conditions. 10. Derate above 39°C at 0.37 mA/°C. 11. For operation below -20°C, contact your local HP components sales office or an authorized distributor. Electrical/Optical Characteristics at TA = 25°C Red Device Series HDSP- Parameter Symbol Min. Typ. 600 1300 Max. Units µcd Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 1.6 λPEAK 655 nm λd 640 nm 12 V 53XX Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] 1400 VR 3.0 Test Conditions IF = 20 mA IF = 100 mA Peak: 1 of 5 df 2.0 V Temperature Coefficient of VF /Segment or DP ∆VF/°C -2 mV/°C Thermal Resistance LED Junctionto-Pin RθJ-Pin 345 °C/W/ Seg IF = 20 mA IR = 100 µA AlGaAs Red Device Series HDSP- Parameter Symbol Min. Typ. Luminous (Digit Average) IV 9.1 16.0 Forward Voltage/Segment or DP VF Intensity/Segment[1,2,5] Max. Units mcd 1.8 Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] IF = 20 mA IF = 100 mA 3.0 λPEAK 645 nm λd 637 nm 15 V VR IF = 20 mA V 2.0 H15X Test Conditions 3.0 Temperature Coefficient of VF /Segment or DP ∆VF/°C -2 mV/°C Thermal Resistance LED Junctionto-Pin RθJ-Pin 400 °C/W/ Seg IR = 100 µA 3-87 High Efficiency Red Device Series HDSP- Parameter Symbol Luminous Intensity/Segment[1,2,6] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 λPEAK 635 nm Dominant Wavelength[3] λd 626 nm Reverse Voltage/Segment or DP[4] VR 30 V 55XX Peak Wavelength Min. Typ. 900 2800 Max. Units µcd 3700 3.0 Test Conditions IF = 10 mA IF = 60 mA Peak: 1 of 6 df 2.5 V Temperature Coefficient of VF /Segment or DP ∆VF/°C -2 mV/°C Thermal Resistance LED Junctionto-Pin RθJ-Pin 345 °C/W/ Seg Parameter Symbol IF = 20 mA IR = 100 µA Yellow Device Series HDSP- Typ. 600 1800 Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.1 λPEAK 583 57XX Peak Wavelength Dominant Wavelength[3,7] Reverse Voltage/Segment or 3-88 Min. DP[4] Max. Units µcd 2750 Test Conditions IF = 10 mA IF = 60 mA Peak: 1 of 6 df 2.5 V IF = 20 mA nm λd 581.5 586 VR 3.0 40 V 592.5 nm Temperature Coefficient of VF /Segment or DP ∆VF/°C -2 mV/°C Thermal Resistance LED Junctionto-Pin RθJ-Pin 345 °C/W/ Seg IR = 100 µA High Performance Green Device Series HDSP- Parameter Symbol Min. Typ. 900 2500 IV Forward Voltage/Segment or DP VF 2.1 λPEAK 566 Dominant Wavelength[3,7] λd 571 Reverse Voltage/Segment or DP[4] VR Peak Wavelength Units µcd Luminous Intensity/Segment[1,2] (Digit Average)` 56XX Max. 3100 3.0 Test Conditions IF = 10 mA IF = 60 mA Peak: 1 of 6 df 2.5 V IF = 10 mA nm 577 nm 50 V Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junctionto-Pin RθJ-Pin 345 °C/W/ Seg IR = 100 µA Notes: 1. Device case temperature is 25°C prior to the intensity measurement. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series. 6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series. 7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. Red, AlGaAs Red Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – Red. Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration – AlGaAs Red. 3-89 I F – FORWARD CURRENT PER SEGMENT – mA 160 140 RED 120 AlGaAs RED 100 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 V F – FORWARD VOLTAGE – V Figure 3. Maximum Allowable DC Current vs. Ambient Temperature. Figure 4. Forward Current vs. Forward Voltage. 2.00 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) AlGaAs RED 1.75 1.50 1.25 RED 1.00 0.75 0.50 0.25 0 0 5 10 15 20 25 30 35 40 IF – FORWARD CURRENT PER SEGMENT – mA Figure 5. Relative Luminous Intensity vs. DC Forward Current. Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. HER, Yellow, Green Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – HER. 3-90 Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow. 50 R θ J-A = 770°C/W IDC MAX – MAXIMUM DC CURRENT PER SEGMENT – mA 45 40 35 30 HER, ORANGE 25 GREEN 20 YELLOW 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 T A – AMBIENT TEMPERATURE – °C 90 4.0 80 3.5 70 60 HER SERIES YELLOW SERIES 50 GREEN SERIES 40 30 20 10 0 η V – RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA PER SEGMENT) Figure 10. Maximum Allowable DC Current vs. Ambient Temperature. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA I F – FORWARD CURRENT PER SEGMENT – mA Figure 9. Maximum Tolerable Peak Current vs. Pulse Duration – Green. HER, YELLOW, GREEN 3.0 2.5 2.0 1.5 1.0 0.5 0 1.0 2.0 3.0 4.0 5.0 V F – FORWARD VOLTAGE – V Figure 11. Forward Current vs. Forward Voltage. 0 5 10 15 20 25 30 35 40 IF – FORWARD CURRENT PER SEGMENT – mA Figure 12. Relative Luminous Intensity vs. DC Forward Current. 1.6 YELLOW SERIES 1.5 1.4 HER SERIES 1.3 GREEN SERIES 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0 10 20 30 40 50 60 70 80 90 100 I PEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 13. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Electrical/Optical For more information on electrical/optical characteristics, please see Application Note 1005. Contrast Enhancement For information on contrast enhancement please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloro– ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs please refer to Application Note 1027. 3-91