F8A thru F10A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 1200~2000V Forward Current 1A Features • • • • • • Glass passivated Standard Rectifiers Very low profile - typical height of 1.0 mm Ideal for automated placement Low leakage current Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds eSGA (SOD‐123FL) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average g forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range Symbol F8A F9A F10A Unit VRRM VRMS VDC IF(AV) ( ) 1200 840 1200 1500 1050 1500 1.0 2000 1400 2000 V V V A IFSM 30 A TJ, TSTG - 55 to + 150 °C Electrical Characteristics Parameter Test Conditions Maximum instantaneous 1.0A ,TA=25℃ forward voltage Maximum DC reverse current TA=25℃ at rated DC blocking voltage Typical junction capacitance 4.0 V, 1 MHz Typical thermal resistance 1) j ti to juntion t ambient bi t (TA = 25 °C unless otherwise noted) Symbol F8A F9A F10A Unit VF 1.1 Volts IR 5 µA CJ 5.4 pF RθJA 70 ℃/W Note:1),The thermal resistance from junction to ambient,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2015.07-Rev.A F8A thru F10A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 1200~2000V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak g Current Forward Surge Figure 1.Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Figure 3. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2015.07-Rev.A F8A thru F10A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 1200~2000V Forward Current 1A Package Outline Dimensions DIM A Unit: mm Unit: inch MIN MAX MIN MAX 0.9 1.08 0.035 0.043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2015.07-Rev.A F8A thru F10A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 1200~2000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou Good-Ark Good Ark Electronics Co., Co Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may ma contain technical inaccuracies inacc racies or typographical t pographical errors. errors Suzhou S ho Good-Ark Good Ark Electronics Co., Co Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce d in i whole h l or in i partt these th materials. t i l Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.07-Rev.A