GBJ25005 thru GBJ2510 Glass Passivated Bridge Rectifiers REVERSE VOLTAGE 50 to 1000 VOLTS FORWARD CURRENT 25 AMPERES P b Lead(Pb)-Free Features: * Rating to 1000V PRV. * Ideal for printed circuit board. * Low forward voltage drop, high current capability. * Reliable low cost construction utilizing molded plastic technique resultsininexpensiveproduct. * Plastic package used has Underwriters Laboratory GBJ GBJ Outline Dimensions K E A Q L ~ ~ _ + D B K G R M C H S N WEITRON http://www.weitron.com.tw P P J 1/3 Dim Min Max A B C D E G H J K L M N P Q R S 29.7 19.7 17.0 10.8 4.4 3.4 2.5 0.6 30.3 20.3 18.0 11.2 4.8 3.8 2.9 0.8 5.1(Typ) 4.2 3.6 10.2 9.8 7.7 7.3 2.7 2.3 2.4 2.0 1.1 0.9 01-Feb-2011 GBJ25005 thru GBJ2510 Maximum Ratings And Electrical Characteristics Rating at 25 ambient temperature unless otherwise specified. Singlephase,halfwave ,60Hz,resistive or inductive load. For capacitive load,derate current by 20% Characteristic Symbol 25005 2501 2502 2504 2506 2508 2510 Uuits Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V MaximumAverage Forward (with heatsink Note2) C=100°C (without heatsink) IFAV 25.0 4.2 A Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposedon Rated Load(JEDEC Method) IFSM 350 A CJ 85 pF RθJC 0.6 °C/W TJ -50 to +150 °C TSTG -50 to +150 °C Typical Junction Capacitance Per Element (Note1) Typical Thermal Resistance (Note2) Operating junction temperature range Storage temperature range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 300mm x 300mm x 1.6mm cu plate heatsink. Electrical Characteristic Characteristic Symbol 25005 2501 2502 2504 2506 2508 2510 Uuits Maximum Forward Voltage @ 12.5A VF 1.1 V Maximum Instantaneous Reverse Current Rated DC Voltage, TA=25°C TA=125°C IR 10.0 500 µA I2tRatingfor Fusing(t<8.3ms) I2t 510 A2s WEITRON http://www.weitron.com.tw 2/3 01-Feb-2011 GBJ25005 thru GBJ2510 25 PEAK FORWARD SURGE CURRENT , AMPERES AVERAGE FORWARD CURRENT AMPERES Ratings and Characteristics Curves WITH HEATSINK 20 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 15 10 WITHOUT HEATSINK 5 0 0 20 40 60 80 100 120 140 350 300 250 T J= SINGLE -SINE- WAVE (JEDEC METHOD) 200 150 100 50 0 1 2 20 50 100 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, FIG.2-MAXMUN NON-REPETITIVE SURGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE 100 INSTANTANEOUS FORWARD CURRENT, (A) 1000 CAPACITANCE,(pF) 10 5 100 10 T J= ,f=1MHZ 10 1.0 T J = 25 PULSE WIDTH 300us 0.1 1.0 1.0 10.0 0.01 100 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.3-TYPICAL JUNCTION CAPACITANCE FIG.4-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ,(uA) 1000 T J= 100 T J= 10 T J= 1.0 T J=25 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG.5-TYPICAL REVERSE CHARACTERISTICS WEITRON http://www.weitron.com.tw 3/3 01-Feb-2011