1 3 2 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 APT15D120BCT 1200V 15A APT15D120BCTG 1200V 15A *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular TO-247 Package or • Cooler Operation • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers Surface Mount D3PAK Package • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • Low Leakage Current All Ratings: TC = 25°C unless otherwise specified. MAXIMUM RATINGS Symbol VR APT15D120BCT(G) Characteristic / Test Conditions Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 98°C, Duty Cycle = 0.5) IFSM TJ,TSTG TL UNIT Maximum D.C. Reverse Voltage VRRM IF(RMS) Density 1200 Volts 15 RMS Forward Current (Square wave, 50% duty) 24 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 110 Amps -55 to 150 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS VF MIN Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V TYP MAX IF = 15A 2.0 2.5 IF = 30A 2.3 IF = 15A, TJ = 125°C 1.8 Volts VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 Microsemi Website - http://www.microsemi.com 17 UNIT μA pF 053-0022 Rev B 10-2009 Symbol DYNAMIC CHARACTERISTICS Symbol APT15D120BCT(G) Characteristic Test Conditions MIN TYP MAX UNIT trr Reverse Recovery Time I = 1A, di /dt = -100A/μs, V = 30V, T = 25°C F F R J - 32 trr Reverse Recovery Time - 260 Qrr Reverse Recovery Charge - 480 - 4 - 370 ns - 1300 nC - 9 - 140 - 2000 - 28 MIN TYP IRRM Reverse Recovery Time Qrr Reverse Recovery Charge IF = 15A, diF/dt = -200A/μs Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM VR = 800V, TC = 25°C Maximum Reverse Recovery Current trr IRRM IF = 15A, diF/dt = -200A/μs VR = 800V, TC = 125°C IF = 15A, diF/dt = -1000A/μs Maximum Reverse Recovery Current VR = 800V, TC = 125°C ns nC - - Amps Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance WT Torque MAX 1.18 40 Package Weight oz 5.9 g 10 lb•in 1.1 N•m Microsemi Reserves the right to change, without notice, the specifications and information contained herein. 0.9 1.0 0.5 Note: 0.40 0.3 t1 t2 0.20 SINGLE PULSE 0.1 0.05 0 053-0022 Rev B 10-2009 0.7 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 1.20 0.60 10 -5 10-4 °C/W 0.22 Maximum Mounting Torque 0.80 UNIT t Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION TYPICAL PERFORMANCE CURVES 50 APT15D120BCT(G) 500 T =125°C J V =800V 40 30 20 TJ = 150°C TJ = 25°C 10 TJ = 125°C 0 trr, REVERSE RECOVERY TIME (ns) IF, FORWARD CURRENT (A) 30A 0.5 1 1.5 2 2.5 3 3.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 100 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/μs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 0 200 R 3000 30A 2500 2000 15A 1500 1000 7.5A 500 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 trr 1.0 IRRM, REVERSE RECOVERY CURRENT (A) 35 T =125°C J V =800V T =125°C J V =800V 30A R 30 25 20 15 15A 10 7.5A 5 0 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 0 200 30 Qrr Duty cycle = 0.5 T =150°C J 25 IRRM 0.8 trr 20 0.6 Qrr IF(AV) (A) Qrr, REVERSE RECOVERY CHARGE (nC) 7.5A 200 0 0 0 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/μs) 15A 300 TJ = -55°C 3500 15 0.4 10 0.2 5 0.0 R 400 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 160 120 100 80 60 40 20 0 .7 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-0022 Rev B 10-2009 CJ, JUNCTION CAPACITANCE (pF) 140 APT15D120BCT(G) Vr diF /dt Adjust +18V APT10035LLL 0V D.U.T. 30μH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 (BCT) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC Common Cathode 20.80 (.819) 21.46 (.845) 3.55 (.138) 3.81 (.150) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.21 (.087) 2.59 (.102) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 053-0022 Rev B 10-2009 5.38 (.212) 6.20 (.244) Anode 1 Common Cathode Anode 2 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) Microsemi’s products are covered by one or more of U.S. patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743, 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. US and Foreign patents pending. All Rights Reserved.