MUN5316DW1, NSBC143TPDXV6 Complementary Bias Resistor Transistors R1 = 4.7 kW, R2 = 8 kW www.onsemi.com NPN and PNP Transistors with Monolithic Bias Resistor Network This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base−emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. PIN CONNECTIONS (3) (2) R1 Q2 R2 • • • • Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable* Simplifies Circuit Design Reduces Board Space Reduces Component Count These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant R2 Q1 R1 Features • S and NSV Prefix for Automotive and Other Applications (1) (4) (5) (6) MARKING DIAGRAMS 6 16 M G G SOT−363 CASE 419B 1 MAXIMUM RATINGS (TA = 25°C both polarities Q1 (PNP) and Q2 (NPN), unless otherwise noted) Rating Symbol Max Unit Collector−Base Voltage VCBO 50 Vdc Collector−Emitter Voltage VCEO 50 Vdc Collector Current − Continuous IC 100 mAdc Input Forward Voltage VIN(fwd) 30 Vdc Input Reverse Voltage −NPN −PNP VIN(rev) Vdc 1 16 M G 16 M G G SOT−563 CASE 463A = Specific Device Code = Date Code* = Pb−Free Package (Note: Microdot may be in either location) 6 5 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping† MUN5316DW1T1G NSVMUN5316DW1T1G* SOT−363 3,000 / Tape & Reel NSBC143TPDXV6T1G, NSVBC143TPDXV6T1G* SOT−563 4,000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2016 March, 2016 − Rev. 3 1 Publication Order Number: DTC143TP/D MUN5316DW1, NSBC143TPDXV6 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit 187 256 1.5 2.0 mW MUN5316DW1 (SOT−363) One Junction Heated Total Device Dissipation TA = 25°C (Note 1) (Note 2) Derate above 25°C (Note 1) (Note 2) Thermal Resistance, Junction to Ambient PD (Note 1) (Note 2) RqJA mW/°C 670 490 °C/W 250 385 2.0 3.0 mW MUN5316DW1 (SOT−363) Both Junction Heated (Note 3) Total Device Dissipation TA = 25°C (Note 1) (Note 2) Derate above 25°C (Note 1) (Note 2) PD mW/°C (Note 1) (Note 2) RqJA 493 325 °C/W Thermal Resistance, (Note 1) Junction to Lead (Note 2) RqJL 188 208 °C/W TJ, Tstg −55 to +150 °C 357 2.9 mW mW/°C Thermal Resistance, Junction to Ambient Junction and Storage Temperature Range NSBC143TPDXV6 (SOT−563) One Junction Heated Total Device Dissipation TA = 25°C (Note 1) Derate above 25°C (Note 1) Thermal Resistance, Junction to Ambient PD RqJA (Note 1) °C/W 350 NSBC143TPDXV6 (SOT−563) Both Junction Heated (Note 3) Total Device Dissipation TA = 25°C (Note 1) Derate above 25°C (Note 1) Thermal Resistance, Junction to Ambient PD 500 4.0 RqJA (Note 1) Junction and Storage Temperature Range TJ, Tstg 1. FR−4 @ Minimum Pad. 2. FR−4 @ 1.0 x 1.0 Inch Pad. 3. Both junction heated values assume total power is sum of two equally powered channels. www.onsemi.com 2 mW mW/°C °C/W 250 −55 to +150 °C MUN5316DW1, NSBC143TPDXV6 ELECTRICAL CHARACTERISTICS (TA = 25°C both polarities Q1 (PNP) and Q2 (NPN), unless otherwise noted) Symbol Characteristic Min Typ Max − − 100 − − 500 − − 1.9 50 − − 50 − − 160 350 − − − 0.25 − 0.6 0.58 − − 0.9 1.0 − − − 0.2 4.9 − − Unit OFF CHARACTERISTICS Collector−Base Cutoff Current (VCB = 50 V, IE = 0) ICBO Collector−Emitter Cutoff Current (VCE = 50 V, IB = 0) ICEO Emitter−Base Cutoff Current (VEB = 6.0 V, IC = 0) IEBO Collector−Base Breakdown Voltage (IC = 10 mA, IE = 0) V(BR)CBO Collector−Emitter Breakdown Voltage (Note 4) (IC = 2.0 mA, IB = 0) V(BR)CEO nAdc nAdc mAdc Vdc Vdc ON CHARACTERISTICS hFE DC Current Gain (Note 4) (IC = 5.0 mA, VCE = 10 V) Collector−Emitter Saturation Voltage (Note 4) (IC = 10 mA, IB = 0.3 mA) VCE(sat) Input Voltage (off) (VCE = 5.0 V, IC = 100 mA) (NPN) (VCE = 5.0 V, IC = 100 mA) (PNP) Vi(off) Input Voltage (on) (VCE = 0.2 V, IC = 10 mA) (NPN) (VCE = 0.2 V, IC = 10 mA) (PNP) Vi(on) Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kW) VOL Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW) VOH Vdc Vdc Vdc Vdc Vdc Input Resistor R1 3.3 4.7 6.1 Resistor Ratio R1/R2 − − − kW Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle ≤ 2%. PD, POWER DISSIPATION (mW) 400 350 300 (1) SOT−363; 1.0 x 1.0 inch Pad (2) SOT−563; Minimum Pad 250 200 (1) (2) 150 100 50 0 −50 −25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (°C) Figure 1. Derating Curve www.onsemi.com 3 MUN5316DW1, NSBC143TPDXV6 TYPICAL CHARACTERISTICS − NPN TRANSISTORS MUN5316DW1, NSBC143TPDXV6 1000 150°C 25°C 0.1 −55°C 25°C 100 −55°C 10 VCE = 10 V 0.01 1 0 10 20 30 40 50 1 10 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 2. VCE(sat) vs. IC Figure 3. DC Current Gain 3.2 100 2.4 IC, COLLECTOR CURRENT (mA) f = 10 kHz IE = 0 A TA = 25°C 2.8 2.0 1.6 1.2 0.8 0.4 150°C 25°C −55°C 10 1 0.1 VO = 5 V 0.01 0 0 10 20 30 40 0 50 1 2 3 VR, REVERSE VOLTAGE (V) Vin, INPUT VOLTAGE (V) Figure 4. Output Capacitance Figure 5. Output Current vs. Input Voltage 100 Vin, INPUT VOLTAGE (V) Cob, OUTPUT CAPACITANCE (pF) 150°C IC/IB = 10 hFE, DC CURRENT GAIN VCE(sat), COLLECTOR−EMITTER VOLTAGE (V) 1 10 25°C −55°C 1 150°C VO = 0.2 V 0.1 0 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 6. Input Voltage vs. Output Current www.onsemi.com 4 50 4 MUN5316DW1, NSBC143TPDXV6 1 1000 IC/IB = 10 0.1 150°C hFE, DC CURRENT GAIN VCE(sat), COLLECTOR−EMITTER VOLTAGE (V) TYPICAL CHARACTERISTICS − PNP TRANSISTORS MUN5316DW1, NSBC143TPDXV6 150°C 25°C −55°C 0.01 0 20 40 30 10 IC, COLLECTOR CURRENT (mA) 25°C 100 10 VCE = 10 V 1 50 −55°C 1 10 IC, COLLECTOR CURRENT (mA) Figure 7. VCE(sat) vs. IC Figure 8. DC Current Gain 10 100 8 IC, COLLECTOR CURRENT (mA) f = 10 kHz lE = 0 A TA = 25°C 9 7 6 5 4 3 2 1 0 25°C 150°C −55°C 10 1 0.1 0.01 VO = 5 V 0.001 0 10 20 30 40 VR, REVERSE VOLTAGE (V) 0 50 Figure 9. Output Capacitance 1 2 3 Vin, INPUT VOLTAGE (V) VO = 0.2 V 10 25°C −55°C 1 150°C 0.1 0 4 Figure 10. Output Current vs. Input Voltage 100 Vin, INPUT VOLTAGE (V) Cob, OUTPUT CAPACITANCE (pF) 100 10 20 30 40 IC, COLLECTOR CURRENT (mA) Figure 11. Input Voltage vs. Output Current www.onsemi.com 5 50 5 MUN5316DW1, NSBC143TPDXV6 PACKAGE DIMENSIONS SC−88/SC70−6/SOT−363 CASE 419B−02 ISSUE Y 2X aaa H D D H A D 6 5 GAGE PLANE 4 L L2 E1 E 1 2 DETAIL A 3 aaa C 2X bbb H D 2X 3 TIPS NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END. 4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY AND DATUM H. 5. DATUMS A AND B ARE DETERMINED AT DATUM H. 6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP. 7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDITION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OF THE FOOT. e B 6X ddd TOP VIEW DIM A A1 A2 b C D E E1 e L L2 aaa bbb ccc ddd b A2 M C A-B D DETAIL A A 6X ccc C A1 SIDE VIEW C SEATING PLANE c MILLIMETERS MIN NOM MAX −−− −−− 1.10 0.00 −−− 0.10 0.70 0.90 1.00 0.15 0.20 0.25 0.08 0.15 0.22 1.80 2.00 2.20 2.00 2.10 2.20 1.15 1.25 1.35 0.65 BSC 0.26 0.36 0.46 0.15 BSC 0.15 0.30 0.10 0.10 END VIEW RECOMMENDED SOLDERING FOOTPRINT* 6X 6X 0.30 0.66 2.50 0.65 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 6 INCHES NOM MAX −−− 0.043 −−− 0.004 0.035 0.039 0.008 0.010 0.006 0.009 0.078 0.086 0.082 0.086 0.049 0.053 0.026 BSC 0.010 0.014 0.018 0.006 BSC 0.006 0.012 0.004 0.004 MIN −−− 0.000 0.027 0.006 0.003 0.070 0.078 0.045 MUN5316DW1, NSBC143TPDXV6 PACKAGE DIMENSIONS SOT−563, 6 LEAD CASE 463A ISSUE G D −X− 5 6 1 2 A L 4 E −Y− 3 b e NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. DIM A b C D E e L HE HE C 5 PL 6 0.08 (0.003) M X Y MILLIMETERS MIN NOM MAX 0.50 0.55 0.60 0.17 0.22 0.27 0.08 0.12 0.18 1.50 1.60 1.70 1.10 1.20 1.30 0.5 BSC 0.10 0.20 0.30 1.50 1.60 1.70 INCHES NOM MAX 0.021 0.023 0.009 0.011 0.005 0.007 0.062 0.066 0.047 0.051 0.02 BSC 0.004 0.008 0.012 0.059 0.062 0.066 MIN 0.020 0.007 0.003 0.059 0.043 SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative DTC143TP/D