LED Display Product Data Sheet LTA-1000M-01 Spec No.: DS30-2006-172 Effective Date: 12/05/2006 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LED DISPLAY LTA-1000M-01 DATA SHEET Rev Description - SPEC. Original Spec NO.: : 06/NOV/06 REV. : - PAGE NO. : PART NO.:LTA-1000M-01 BNS-OD-C131/A4 PHANOMKORN J. DS30-2006-172 D A T E NO. By 0 OF 5 PAGE: 0 of 6 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES ＊RECTANGULAR LIGHT BAR. ＊LARGE, BRIGHT, UNIFORM LIGHT EMITTING AREAS. ＊LOW POWER REQUIREMENT. ＊HIGH BRIGHTNESS & HIGH CONTRAST. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LUMINOUS INTENSITY. ＊LEAD-FREE PACKAGE(ACCORDING TO ROHS) DESCRIPTION The LTA-1000M-01 is a ten rectangular light sources array display designed for a variety of applications where a continuously large, bright source of light is required. This device utilizes green LED chips, which are made from GaP on a transparent GaP substrate, This device utilizes yellow LED chips, which are made from GaAsP on a transparent GaP substrate and this device utilizes Hi-EFF red LED chips, which are made from GaAsP on a transparent GaP substrate, and has a black face and white segments. DEVICE PART NO. DESCRIPTION MULTI COLOR Universal Ten Rectangular Bar LTA-1000M-01 PART NO.:LTA-1000M-01 BNS-OD-C131/A4 PAGE: 1 of 6 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters. Tolerances are 0.25 mm unless otherwise note. 2. Pin tip’s shift tolerance is 0.4 mm. INTERNAL CIRCUIT DIAGRAM PART NO.:LTA-1000M-01 BNS-OD-C131/A4 PAGE: 2 of 6 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PIN CONNECTION PART NO.:LTA-1000M-01 BNS-OD-C131/A4 No. CONNECTION 1 ANODE A 2 ANODE 3 ANODE C 4 ANODE D 5 ANODE E 6 ANODE 7 ANODE G 8 ANODE H 9 ANODE J 10 ANODE K 11 CATHODE K 12 CATHODE J 13 CATHODE H 14 CATHODE G 15 CATHODE F 16 CATHODE E 17 CATHODE D 18 CATHODE C 19 CATHODE B 20 CATHODE A B F PAGE: 3 of 6 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING AT Ta=25oC GREEN YELLOW HI-EFF RED PARAMETER UNIT Power Dissipation Per Segment 75 60 75 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 100 80 100 mA 25 20 25 0.33 0.27 0.33 mA mA/℃ 5 5 Continuous Forward Current Per Segment Derating Linear From 25℃ Per Segment Reverse Voltage Per Segment Operating Temperature Range 5 -35℃ to +105℃ Storage Temperature Range -35℃ to +105℃ V Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C or of temperature unit (during assembly) not over max temperature rating above. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC GREEN PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION 2800 cd IF=10mA p 565 nm IF=20mA Spectral Line Half-Width 30 nm IF=20mA Dominant Wavelength d 569 nm IF=20mA Forward Voltage Per Segment VF 2.1 2.6 V IF=20mA Reverse Current Per Segment IR 100 A VR=5V IV-m 2:1 Average Luminous Intensity IV Peak Emission Wavelength Luminous Intensity Matching Ratio PART NO.:LTA-1000M-01 BNS-OD-C131/A4 800 IF=10mA PAGE: 4 of 6 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only YELLOW PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION 2000 cd IF=10mA p 585 nm IF=20mA Spectral Line Half-Width 35 nm IF=20mA Dominant Wavelength d 588 nm IF=20mA Forward Voltage Per Segment VF 2.1 2.6 V IF=20mA Reverse Current Per Segment IR 100 A VR=5V IV-m 2:1 Average Luminous Intensity IV Peak Emission Wavelength Luminous Intensity Matching Ratio 540 IF=10mA HI-EFF RED PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION 2000 cd IF=10mA p 650 nm IF=20mA Spectral Line Half-Width 40 nm IF=20mA Dominant Wavelength d 630 nm IF=20mA Forward Voltage Per Segment VF 2.1 2.6 V IF=20mA Reverse Current Per Segment IR 100 A VR=5V IV-m 2:1 Average Luminous Intensity IV Peak Emission Wavelength Luminous Intensity Matching Ratio (Similar Light Area) 540 IF=10mA Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.:LTA-1000M-01 BNS-OD-C131/A4 PAGE: 5 of 6 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES o (25 C Ambient Temperature Unless Otherwise Noted) PART NO.:LTA-1000M-01 BNS-OD-C131/A4 PAGE: 6 of 6