Fujitsu MB89567ACPF 8-bit proprietary microcontroller cmo Datasheet

FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12555-1E
8-bit Proprietary Microcontroller
CMOS
F2MC-8L MB89560A Series
MB89567A/567AC/P568/PV560
■ DESCRIPTION
The MB89560A series has been developed as a general-purpose version of the F2MC*1-8L family consisting of
proprietary 8-bit, single-chip microcontrollers.
In addition to a compact instruction set, the microcontroller contains a variety of peripheral functions such as I2C
interface*2, timers, 2 ch 8-bit PWM timers, 8/16-bit timer, 21-bit timebase timer, 8-bit PWC timer, 17-bit Watch
prescaler, Watch-dog timer, High speed UART, 8-bit SIO, UART/SIO, LCD controller/driver (optional booster),
Two type Programmable Pulse Generators (PPG), an A/D converter, and external interrupt.
*1 : F2MC stands for FUJITSU Flexible Microcontroller.
*2 : I2C of this product is complied to Intel Corp. System Management Bus Rev. 1.0 specification and to the Philips
I2C specification.
■ FEATURES
•
•
•
•
F2MC-8L family CPU core
Low-voltage operation (when an A/D converter is not used)
Low current consumption (applicable to the dual-clock system)
Minimum execution time: 0.32 µs at 12.5 MHz /3.5 V to 5.5 V
(Continued)
■ PACKAGES
80-pin Plastic LQFP
80-pin Plastic QFP
80-pin Plastic LQFP
80-pin Ceramic MQFP
FPT-80P-M05
FPT-80P-M06
FPT-80P-M11
MQP-80C-P01
MB89560A Series
(Continued)
• I2C interface circuit
• LCD controller/driver: 24 segments x 4 commons (Max 96 pixels, duty LCD mode and Static LCD mode)
• LCD booster function (option)
• Wild register (Max 6 different address locations)
• 10-bit A/D converter: 8 channels
• Three types of Serial Interface:
High Speed UART (Transfer rate from 300 bps to 192000 bps /10 MHz main clock)
8-bit Serial I/O (SIO)
UART/SIO
• Two type of Programmable Pulse Generator(PPG): 6-bit PPG and 12-bit PPG
• Six types of timer
8-bit PWM 2 channels timers
8/16-bit timer/counter (8 bits x 2 channels or 16 bits x 1 channel)
21-bit timebase timer
8-bit PWC timer operation
17-bit Watch prescaler
Watch-dog timer
• I/O ports: Max 50 channels
• External interrupt 1: 8 channels
• External interrupt 2 (wake-up function): 4 channels
• Low-power consumption modes (stop mode, sleep mode, and watch mode)
• LQFP-80 and QFP-80 package
• CMOS technology
2
MB89560A Series
■ PRODUCT LINEUP
Part number
MB89567A
MB89567AC
MB89P568
MB89PV560
Mass production products
(mask ROM products)
OTP
Piggy-back
32 K x 8-bit
(internal mask ROM)
48 K x 8-bit
(internal PROM)
56 K x 8-bit
(external ROM)
Parameter
Classification
ROM size
RAM size
1 K x 8-bit
1 K x 8-bit
CPU functions
Number of instructions
Instruction bit length
Instruction length
Data bit length
Minimum execution time
Minimum interrupt processing time
: 136
: 8-bit
: 1 to 3 bytes
: 1-, 8-, 16-bit
: 0.32 µs/12.5 MHz
: 2.88 µs/12.5 MHz
Ports
General-purpose I/O ports (N-channel open drain): 20 pins (2 shared with I2C inputs,
16 shared with LCD, 2 shared with other
resources)
General-purpose I/O ports (CMOS)
: 30 pins (shared with resources)
Total
: 50 pins
21-bit timebase
timer
21-bit
Interrupt cycle: (213, 215, 218 or 222)/FCH*7
Watchdog timer
Reset generate cycle: Min 221/FCH*7 for main clock, Min 214/FCL*7 for sub clock
Watch prescaler
17-bit
Interrupt cycle: 31.25 ms, 0.25 s, 0.50 s, 1.00 s, 2.00 s, 4.00 s/32.768 kHz for subclock
8/16-bit timer/
counter
Can be operated either as a 2-channel 8-bit timer/counter (Timer 1 and Timer 2, each with its
own independent operating clock cycle), or as one 16-bit timer/counter
In Timer 1 or 16-bit timer/counter operation, event counter operation (external clock-triggered)
and square wave output capable
8-bit PWM 2 ch
timer
8-bit interval timer operation (square wave output capable, operating clock cycle: 1 tinst, 8 tinst,
16 tinst, 64 tinst)
8-bit resolution PWM operation (conversion cycle: 128 x 1 tinst to 256 x 64 tinst)
8/16-bit timer/counter output for counter clock selectability
PWC timer
8-bit timer operation (count clock cycle: 1 tinst, 4 tinst, 32 tinst)
8-bit reload timer operation (toggle output possible, operating clock cycle: 1 to 32 tinst)
8-bit pulse width measurement (continuous measurement possible: H-width, L-width, rising
edge to rising edge, falling edge to falling edge, and rising edge to falling edge)
10-bit A/D
converter *2
10-bit resolution × 8 channels
A/D conversion function (conversion time: 60 tinst)
Continuous activation by an 8/16-bit timer/counter output or a timebase timer output capable.
6-bit PPG
Internal 6-bit counter
Pulse width and cycle are program selectable
12-bit PPG
Internal 12-bit counter
Pulse width and cycle are program selectable
(Continued)
3
MB89560A Series
(Continued)
Part number
MB89567A
MB89567AC
MB89P568
MB89PV560
Parameter
I2C interface*4
Not
Available
1 channel
Transfer data length: 4-, 6-, 7-, 8-bit
High speed UART Transfer rate (300 bps to 192000 bps /9.216 MHz main clock)
support sub-clock mode
UART/SIO
Transfer data length: 7-, 8-bit for UART, 8-bit for SIO
Transfer rate (1201 bps to 78125 bps / 10 MHz main clock)
support sub-clock mode
8-bit serial I/O
8-bit, LSB first/MSB first selectability
Transfer clocks (one external shift clock, three internal shift clocks: 2 tinst, 8 tinst, 32 tinst) *5
LCD
Common output: 4 (Max)
Segment output: 24 (Max)
LCD driving power (bias) pins: 4
LCD display RAM size: 12 bytes (24 × 4 bits, Max 96 pixels)
Duty LCD mode and Static LCD mode
Booster for LCD driving: option*1
Dividing resistor for LCD driving: option
Wild register
Maximum of 6-byte data can be assigned in 6 different address.
Used to replace any data in the ROM when specific address and data are assigned in Wild
register.
Wild register can be set up by using different communication methods through the device.
External interrupt
1 (wake-up
function)
8 independent channels (interrupt vector, request flag, request output enable)
Edge selectability (rising/falling)
Used also for wake-up from stop/sleep mode. (edge detection is also permitted in stop mode.)
External interrupt
2 (wake-up
function)
4 channels (“L” level interrupts, independent input enable).
Used also for wake-up from stop/sleep mode. (Low-level detection is also permitted in stop
mode.)
Standby mode
Sub clock mode, sleep mode, stop mode and clock mode
Process
Operating voltage *6
CMOS
2.2 V to 5.5 V
2.7 V to 5.5 V
2.7 V to 5.5 V*3
*1 : When booster is used, the bias is reduced by 1/3. It can be selected by mask option.
*2 : Voltage varies with product.
*3 : When external ROM is used, EPROM: MBM27C512-20 should be used, the operating voltage: 4.5 V to 5.5 V.
*4 : I2C is complied to Intel Corp. System Management Bus Rev. 1.0 specification and to the Philips I2C specification.
*5 : 1 tinst = one instruction cycle (execution time) which can be selected as 1/4, 1/8, 1/16, or 1/64 of main clock
if main clock mode is selected, or 1/2 of the subclock if subclock mode is selected.
*6 : Varies with conditions such as the operating frequency. (See “■ELECTRICAL CHARACTERISTICS.”)
*7 : FCH : main clock source oscillation, FCL : sub clock source oscillation
4
MB89560A Series
■ PACKAGE AND CORRESPONDING PRODUCTS
Package
MB89567A
MB89567AC
MB89P568-101
MB89P568-102
MB89PV560-101
MB89PV560-102
FPT-80P-M05
FPT-80P-M06
FPT-80P-M11
MQP-80C-P01
■ DIFFERENCES AMONG PRODUCTS
1. Memory Size
Before evaluating using the OTPROM (one-time PROM) products, verify its differences from the product that
will actually be used. Take particular care on the following points:
• The stack area, etc., is set at the upper limit of the RAM.
2. Current Consumption
• For the MB89PV560, add the current consumed by the EPROM mounted in the piggy-back socket.
• When operating at low speed, the current consumed by the one-time PROM product is greater than that for
the mask ROM product. However, the current consumption is roughly the same in sleep or stop mode.
• For more information, see “■ ELECTRICAL CHARACTERISTICS.”
3. Mask Options
The functions available as options and the method of specifying options differ between products.
Before using options check “■ MASK OPTIONS.”
4. Wild register function
The Wild Register can be used in the following address spaces.
Device
MB89PV560
4000H to FFFFH
MB89P568
4000H to FFFFH
MB89567A/567AC
8000H to FFFFH
Address Space
5. P40, P41
It will take about 64 count clock of external oscillation to initialize P40 and P41 pins in MB89PV560/P568.
Therefore, these ports will be unstable for a while during power-on. For MB89567A/567AC, these ports will be
in High-Z during power-on.
5
MB89560A Series
■ PIN ASSIGNMENT
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
SEG06
SEG05
SEG04
SEG03
SEG02
SEG01
SEG00
COM3
COM2
COM1
COM0
V3
V2
V1
V0
C0*2
C1*2
P47/PWC
P46/UI/SI1
P45/UO/SO1
(Top view)
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
P44/UCK/SCK1
P43/PWM2/PPG2
P42/PWM1/EC1
P41/HCK*1/TO12
P40/WTO/TO11
P31/SDA
P30/SCL
Vcc
P27/INT23
P26/INT22
P25/INT21
P24/INT20
P23/PPG1
P22/SCK
P21/SO
P20/SI
X1
X0
MODA
X1A
P07/AN7
P06/AN6
P05/AN5
P04/AN4
P03/AN3
P02/AN2
P01/AN1
P00/AN0
AVss
P17/INT17
P16/INT16
P15/INT15
P14/INT14
P13/INT13
P12/INT12
P11/INT11
C
P10/INT10
RST
X0A
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
SEG07
P50/SEG08
P51/SEG09
P52/SEG10
P53/SEG11
P54/SEG12
P55/SEG13
P56/SEG14
P57/SEG15
P60/SEG16
P61/SEG17
P62/SEG18
Vss
P63/SEG19
P64/SEG20
P65/SEG21
P66/SEG22
P67/SEG23
AVR
AVcc
(FPT-80P-M05)
(FPT-80P-M11)
*1: Main clock divided by two output
*2: For built-in LCD booster only
Note: For mask option of *2, please refer to “■ MASK OPTIONS”.
(Continued)
6
MB89560A Series
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
SEG04
SEG03
SEG02
SEG01
SEG00
COM3
COM2
COM1
COM0
V3
V2
V1
V0
C0*2
C1*2
P47/PWC
(Top view)
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
P46/UI/SI1
P45/UO/SO1
P44/UCK/SCK1
P43/PWM2/PPG2
P42/PWM1/EC1
P41/HCK*1/TO12
P40/WTO/TO11
P31/SDA
P30/SCL
Vcc
P27/INT23
P26/INT22
P25/INT21
P24/INT20
P23/PPG1
P22/SCK
P21/SO
P20/SI
X1
X0
MODA
X1A
X0A
RST
P05/AN5
P04/AN4
P03/AN3
P02/AN2
P01/AN1
P00/AN0
AVss
P17/INT17
P16/INT16
P15/INT15
P14/INT14
P13/INT13
P12/INT12
P11/INT11
C
P10/INT10
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
SEG05
SEG06
SEG07
P50/SEG08
P51/SEG09
P52/SEG10
P53/SEG11
P54/SEG12
P55/SEG13
P56/SEG14
P57/SEG15
P60/SEG16
P61/SEG17
P62/SEG18
Vss
P63/SEG19
P64/SEG20
P65/SEG21
P66/SEG22
P67/SEG23
AVR
AVcc
P07/AN7
P06/AN6
(FPT-80P-M06)
*1: Main clock divided by two output
*2: For built-in LCD booster only
Note: For mask option of *2, please refer to “■ MASK OPTIONS”.
(Continued)
7
MB89560A Series
(Continued)
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
SEG04
SEG03
SEG02
SEG01
SEG00
COM3
COM2
COM1
COM0
V3
V2
V1
V0
C0*2
C1*2
P47/PWC
(Top view)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
100
99
98
97
96
95
94
*3
93
92
91
90
89
88
87
86
85
110
111
112
81
82
83
84
101
102
103
104
105
106
107
108
109
P46/UI/SI1
P45/UO/SO1
P44/UCK/SCK1
P43/PWM2/PPG2
P42/PWM1/EC1
P41/HCK*1/TO12
P40/WTO/TO11
P31/SDA
P30/SCL
Vcc
P27/INT23
P26/INT22
P25/INT21
P24/INT20
P23/PPG1
P22/SCK
P21/SO
P20/SI
X1
X0
MODA
X1A
X0A
RST
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
P05/AN5
P04/AN4
P03/AN3
P02/AN2
P01/AN1
P00/AN0
AVss
P17/INT17
P16/INT16
P15/INT15
P14/INT14
P13/INT13
P12/INT12
P11/INT11
C
P10/INT10
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
SEG05
SEG06
SEG07
P50/SEG08
P51/SEG09
P52/SEG10
P53/SEG11
P54/SEG12
P55/SEG13
P56/SEG14
P57/SEG15
P60/SEG16
P61/SEG17
P62/SEG18
Vss
P63/SEG19
P64/SEG20
P65/SEG21
P66/SEG22
P67/SEG23
AVR
AVcc
P07/AN7
P06/AN6
(MQP-80C-P01)
*1: Main clock divided by two output
*2: For built-in LCD booster only
*3: Pin assignment on package top (MB89PV560 only)
Pin no.
Pin
Pin no.
Pin
Pin no.
Pin
81
N.C.
89
AD2
97
N.C.
Pin no.
105
Pin
OE
82
A15
90
AD1
98
04
106
N.C.
83
A12
91
AD0
99
O5
107
A11
84
AD7
92
N.C.
100
O6
108
A9
85
AD6
93
O1
101
07
109
A8
86
AD5
94
O2
102
O8
110
A13
87
AD4
95
O3
103
CE
111
A14
88
AD3
96
VSS
104
A10
112
VCC
N.C.: Internally connected. Do not use.
Note: For mask option of *2, please refer to “■ MASK OPTIONS”.
8
MB89560A Series
■ PIN DESCRIPTION
Pin no.
LQFP*1
LQFP*2
MQFP*3
QFP*4
Pin name
43
45
X0
44
46
X1
42
44
MODA
39
41
RST
49 to 52
51 to 54
P24/INT20
to
P27/INT23
30 to 36,
38
32 to 38,
40
P10/INT10
to
P17/INT17
I/O circuit
type
Function
A
Crystal or other resonator connector pins for the main clock.
The external clock can be connected to X0. When this is done,
be sure to leave X1 open.
C
Memory access mode setting pins.
Connect directly to VSS.
Hysteresis input type.
D
Reset I/O pin
This pin is a CMOS output type with a pull-up resistor, and a
hysteresis input type.
“L” is output from this pin by an internal reset request (optional).
The internal circuit is initialized by the input of “L”.
E
General-purpose CMOS I/O ports
Also serve as an external interrupt 2 input (wake-up function).
External interrupt 2 input is hysteresis input.
Selectable pull-up resistor.
E
General-purpose CMOS I/O ports
Also serve as input for external interrupt 1 input.
External interrupt 1 input is hysteresis input.
Selectable pull-up resistor.
60
62
P44/UCK/
SCK1
E
General-purpose CMOS I/O ports
Also serve as the clock I/O for the High-speed UART and Serial
I/O.
The peripheral is a hysteresis input type.
Selectable pull-up resistor.
61
63
P45/UO/
SO1
F
General-purpose CMOS I/O ports
Also serves as the data output for the High-speed UART and
Serial I/O.
62
64
P46/UI/SI1
G
N-ch open drain general-purpose I/O ports
Also serves as the data input for the High-speed UART and Serial I/O.
The peripheral is a hysteresis input type.
63
65
P47/PWC
G
N-ch open drain general-purpose I/O port
Also serve as the external clock input for PWC.
The peripheral is a hysteresis input.
56
58
P40/WTO/
TO11
F
General-purpose CMOS I/O port
Also serves as an 8/16-bit timer/counter output and PWC output.
(Continued)
9
MB89560A Series
Pin no.
LQFP*1
LQFP*2
57
MQFP*3
QFP*4
59
Pin name
P41/HCK/
TO12
I/O circuit
type
Function
F
General-purpose CMOS I/O port
Also serves as an 8/16-bit timer/counter output.
and half of main clock output
Selectable pull-up resistor.
45
47
P20/SI
E
General-purpose CMOS I/O port
Also serves as the data input for the serial I/O.
The peripheral is a hysteresis input type.
Selectable pull-up resistor.
46
48
P21/SO
F
General-purpose CMOS I/O port
Also serves as the data output for the serial I/O.
Selectable pull-up resistor.
47
49
P22/SCK
E
General-purpose CMOS I/O port
Also serves as the clock I/O for the serial I/O.
The peripheral is a hysteresis input type.
Selectable pull-up resistor.
48
50
P23/PPG1
F
General-purpose CMOS I/O port
Also serves as the 6 bit PPG output pin.
Selectable pull-up resistor.
54
56
P30/SCL
G
N-ch open-drain general-purpose I/O port
Clock I/O pin for I2C interface
55
57
P31/SDA
G
N-ch open-drain general-purpose I/O port
Data I/O pin for I2C interface
65
67
C0
64
66
C1
—
Function as capacitor connection pin in the products with a
booster.
61
P43/
PWM2/
PPG2
F
General-purpose CMOS I/O port
Also serves PWM wave output for the 8-bit PWM timer 1 and
as 12 bit programmable pulse generator output.
Selectable pull-up resistor.
58
60
P42/
PWM1/
EC1
E
General-purpose CMOS I/O port
Also serves as the PWM wave output and external clock for
the 8/16 bit timer counter.
Selectable pull-up resistor.
21 to 28
23 to 30
P00/AN0
to
P07/AN7
J
General-purpose CMOS I/O ports
Also serve as the analog input for the A/D converter.
Selectable pull-up resistor.
59
(Continued)
10
MB89560A Series
(Continued)
Pin no.
Pin name
I/O circuit
type
12 to 14
16 to 20
P60/
SEG16 to
P67/
SEG23
H
N-ch open-drain general-purpose output ports
Also serve as an LCD controller/driver segment output.
2 to 9
4 to 11
P50/SEG8
to
P57/
SEG15
H
N-ch open-drain general-purpose output ports
Also serve as an LCD controller/driver segment output.
74 to 80, 1
1 to 3
76 to 80
SEG0 to
SEG7
I
LCD controller/driver segment output-only pins
70 to 73
72 to 75
COM0
to
COM3
I
LCD controller/driver common output-only pins
66 to 69
68 to 71
V0 to V3
—
LCD driving power supply pins.
40
42
X0A
41
43
X1A
B
Crystal or other resonator connector pins for the subclock
(Subclock: 32.768 kHz)
53
55
Vcc
—
Power supply pin
37
39
C
—
Capacitor connection pin *5
13
15
Vss
—
Power supply (GND) pin
20
22
AVcc
—
A/D converter power supply pin
19
21
AVR
—
A/D converter reference voltage input pin
29
31
AVss
—
A/D converter power supply pin
Use this pin at the same voltage as VSS.
LQFP*1
LQFP*2
MQFP*3
QFP*4
10 to 12
14 to 18
Function
*1: FPT-80P-M05
*2: FPT-80P-M11
*3: MQP-80C-P01
*4: FPT-80P-M06
*5: When MB89567A / MB89567AC / MB89PV560-101 / MB89PV560-102 is used, this pin will become NC pin
without internal connection. There is no problem to leave pins open, to fix pins at VCC and to fix pins at VSS.
When MB89P568-101 or MB89P568-102 is used, this pin must be connected to VSS.
11
MB89560A Series
• For External EPROM Socket (MB89PV560 ONLY)
Pin no.
Pin name
I/O
12
Function
82
83
84
85
86
87
88
89
90
91
A15
A12
A7
A6
A5
A4
A3
A2
A1
A0
O
Address output pins
93
94
95
O1
O2
O3
I
Data input pins
96
Vss
O
Power supply (GND) pin
98
99
100
101
102
O4
O5
O6
O7
O8
I
Data input pins
103
CE
O
ROM chip enable pin
Outputs “H” during standby.
104
A10
O
Address output pin
105
OE/Vpp
O
ROM output enable pin
Outputs “L” at all times.
107
108
109
A11
A9
A8
O
110
A13
O
111
A14
O
112
Vcc
O
EPROM power supply pin
81
92
97
106
N.C.
—
Internally connected pins
Be sure to leave them open.
Address output pins
MB89560A Series
■ I/O CIRCUIT TYPE
Type
Circuit
Remarks
Main clock (main clock crystal oscillator)
• At an oscillation feedback resistor of
approximately 1 MΩ/5.0 V
X1
Nch
A
Pch
Pch
X0
Nch
Main clock control signal
Subclock (subclock crystal oscillator)
• At an oscillation feedback resistor of
approximately 4.5 MΩ/5.0 V
X1A
Nch
B
Pch
X0A
Nch
Sub clock control signal
• Hysteresis input
C
• CMOS output
• Hysteresis input
• At an output pull-up resistor (P-ch)
of approximately 50 kΩ/5.0 V
R
Pch
D
Nch
R
Pull-up control
register
Pch
Pch
E
• CMOS output
• CMOS input
• The peripheral is a hysteresis input
type.
• Selectable pull-up resistor (P-ch) of
approximately 50 kΩ/5.0 V
Nch
Port
Peripheral
(Continued)
13
MB89560A Series
(Continued)
Type
Circuit
R
Remarks
Pull-up resistor
control register
Pch
Pch
F
• CMOS output
• CMOS input
• Selectable pull-up resistor (P-ch) of
approximately 50 kΩ/5.0 V
Nch
Port
Nch
G
Port
Peripheral
• N-ch open-drain input/output
• CMOS input
• The peripheral is a hysteresis input
type.
(P30,P31 are OR-type input for I2C)
• N-ch open-drain output
• CMOS input
• LCD controller/driver segment
output
Pch
Nch
Pch
Nch
H
Nch
Port
• LCD controller/driver common/
segment output
Pch
Nch
I
Pch
Nch
R
Pull-up control
register
Pch
Pch
J
Nch
ADEN
Port
Analog input
14
• General CMOS I/O
• Analog input (A/D converter)
• Selectable pull-up resistor (P-ch) of
approximately 50 kΩ/5.0 V
• Pull-up resistors must be disabled
when used as an analog input.
MB89560A Series
■ HANDLING DEVICES
1. Preventing Latchup
Latchup may occur on CMOS ICs if voltage higher than VCC or lower than VSS is applied to input and output pins
other than medium- to high-voltage pins or if higher than the voltage which shows on “1. Absolute Maximum
Ratings” in “■ ELECTRICAL CHARACTERISTICS” is applied between VCC and VSS.
When latchup occurs, power supply current increases rapidly and might thermally damage elements. When
using, take great care not to exceed the absolute maximum ratings.
Also, take care to prevent the analog power supply (AVCC and AVR) and analog input from exceeding the digital
power supply (VCC) when the analog system power supply is turned on and off.
2. Treatment of Unused Input Pins
Leaving unused input pins open could cause malfunctions. They should be connected to a pull-up or pull-down
resistor.
3. Treatment of Power Supply Pins on Microcontrollers with A/D and D/A Converters
Connect to be AVCC = DVCC = VCC and AVSS = AVR = VSS even if the A/D and D/A converters are not in use.
4. Treatment of N.C. Pins
Be sure to leave (internally connected) N.C. pins open.
5. Power Supply Voltage Fluctuations
Although VCC power supply voltage is assured to operate within the rated range, a rapid fluctuation of the voltage
could cause malfunctions, even if it occurs within the rated range. Stabilizing voltage supplied to the IC is therefore
important. As stabilization guidelines, it is recommended to control power so that VCC ripple fluctuations (P-P
value) will be less than 10% of the standard VCC value at the commercial frequency (50 Hz to 60 Hz) and the
transient fluctuation rate will be less than 0.1 V/ms at the time of a momentary fluctuation such as when power
is switched.
6. Precautions when Using an External Clock
Even when an external clock is used, oscillation stabilization time is required for power-on reset and wake-up
from stop mode.
7. Unused LCD dedicated pins
When LCD dedicated pins are not in use, keep it open.
8. Ports shared with SEG pin
When using port shared with SEG pin, be sure that the input voltage to port does not exceed the voltage of V3
(SEG driving voltage). This is particularly important to those devices with booster. When power-on or reset, SEG
pin will output an initial value of “L”.
9. LCD not in use
When LCD is not in use, connect the V3 pin to Vcc and keep other LCD dedicated pins open.
10. Wild Register function
In MB89PV560, wild register function cannot be evaluated. To evaluate the wild register function, use MB89P568.
11. Programming operation on RAM
Program operation debugging at RAM is not possible even when using MB89PV560.
12. Note to Noise in the External Reset Pin (RST)
If the reset pulse applied to the external reset pin (RST) does not meet the specifications, it may cause malfunctions. Use caution so that the reset pulse less than the specifications will not be fed to the external reset pin (RST) .
15
MB89560A Series
■ PROGRAMMING TO THE EPROM ON THE MB89P568
The MB89P568 is an OTPROM version of the MB89567A and MB89567AC.
1. Features
• 48-Kbyte PROM on chip
• Equivalency to the MBM27C1001 in EPROM mode (when programmed with the EPROM programmer)
2. Memory Space
Memory space in EPROM mode is diagrammed below.
Normal operation
0000 H
EPROM mode
(Corresponding addresses on
the EPROM programmer)
I/O
0080 H
RAM
0480 H
Not available
4000 H
4000 H
Program
area
(PROM)
FFFF H
Program
area
(PROM)
FFFF H
3. Programming to the EPROM
In EPROM mode, the MB89P568 functions equivalent to the MBM27C1001. This allows the PROM to be programmed with a general-purpose EPROM programmer (the electronic signature mode cannot be used) by using
the dedicated socket adapter.
• Programming procedure
(1) Set the EPROM programmer to the MBM27C1001.
(2) Load program data into the EPROM programmer at 4000H to FFFFH
(3) Program with the EPROM programmer.
16
MB89560A Series
4. Recommended Screening Conditions
High-temperature aging is recommended as the pre-assembly screening procedure.
Program, verify
Program, verify
+100 °C, 48 h
Read
Assembly
5. Programming Yield
All bits cannot be programmed at Fujitsu shipping test to a blanked OTPROM microcomputer, due to its nature.
For this reason, a programming yield of 100% cannot be assured at all times.
6. EPROM Programmer Socket Adapter
Package
Compatible socket adapter
FPT-80P-M05
ROM-80SQF-32DP-8LA
FPT-80P-M06
ROM-80QF-32DP-8LA2
FPT-80P-M11
ROM-80QF2-32DP-8LA2
Inquiry: San Hayato Co., Ltd.: FAX +81-3-5396-9106 (Tokyo)
17
MB89560A Series
■ PROGRAMMING TO THE EPROM WITH PIGGYBACK/EVALUATION DEVICE
1. EPROM for Use
MBM27C512-20TV
2. Programming Socket Adapter
To program to the PROM using an EPROM programmer, use the socket adapter (manufacturer: Sun Hayato
Co., Ltd.) listed below.
Package
Adapter socket part number
LCC-32 (Rectangle)
ROM-32LC-28DP-YG
Inquiry: San Hayato Co., Ltd.: FAX +81-3-5396-9106 (Tokyo)
3. Memory Space
Normal operation
EPROM mode
(Corresponding addresses on
the EPROM programmer)
0000 H
I/O
0080 H
RAM
0480 H
Not available
2000 H
2000 H
Program area
(PROM)
FFFF H
Program area
(PROM)
FFFF H
4. Programming to EPROM
(1) Set the EPROM programmer to the MBM27C512.
(2) Load program data into the EPROM programmer at 2000H to FFFFH.
(3) Program to 2000H to FFFFH with the EPROM programmer.
18
MB89560A Series
■ BLOCK DIAGRAM
Oscillator
N-ch open drain I/O port
Low-power oscillator
(32.768 kHz)
Watch prescaler
8
8
External interrupt 1
CMOS I/O port
6 bit PPG
P24/INT20
to P27/INT23
P20/SI
P21/SO
P22/SCK
4
Port 2
P23/PPG1
4
External interrupt 2
(wake-up function)
12 bit PPG
P42/PWM1/EC1
P41/HCK*1/TO12
P43/PWM2/PPG2
Port 4
*4
8-bit
timer/counter 1
(Timer 1)
Internal data bus
P10/INT10
to P17/INT17
Port 1
21-bit Time-base
timer
P40/WTO/TO11
PWC
Reset circuit
(Watchdog timer)
RST
High-speed
UART
P46/UI/SI1
8-bit PWM timer 1
CMOS I/O port
(P46 and P47 are N-ch
Open-drain I/O Type)
P47/PWC
4
N-ch open-drain
output port
LCD controller/
driver
8
CMOS I/O port
1K Byte RAM
P45/UO/SO1
8-bit PWM timer 2
8
UART/SIO
P44/UCK/SCK1
*4
8-bit
timer/counter 2
(Timer 2)
Port 5 & Port 6
Subclock
P31/SDA
SIO
Clock controller
X0A
X1A
P30/SCL
Port 3
I2C*2
Main clock
X0
X1
4
4
4
8
Display RAM
(12 bytes)
4
4
F2MC-8L
CPU
COM0 to COM3
V0 to V3
Option
CMOS I/O port
8
10-bit A/D converter
*1: Output of Main clock/2.
*2: I2C is not available in MB89567A.
*3: Selected by mask option
*4: Can be used as a 16-bit timer/counter by connecting Timer 1 output to Timer 2 input.
*5: C pin becomes NC pin in MB89567A/AC/PV560
*6: 48 K byte ROM for MB89P568
Port 0
32K*6 Byte ROM
Other pins
MODA, C,*5 VCC, VSS
SEG0 to SEG7
C0*3
C1*3
Booster
Wild register
P60/SEG16 to
P63/SEG19
P64/SEG20 to
P67/SEG23
P50/SEG8 to
P53/SEG11
P54/SEG12 to
P57/SEG15
8
P00/AN0
to P07/AN7
AVCC
AVSS
AVR
19
MB89560A Series
■ CPU CORE
1. Memory Space
The microcontrollers of the MB89560A series offer a memory space of 64 Kbytes for storing all of I/O, data, and
program areas. The I/O area is located the lowest address. The data area is provided immediately above the I/
O area. The data area can be divided into register, stack, and direct areas according to the application. The
program area is located at exactly the opposite end, that is, near the highest address. Provide the tables of
interrupt reset vectors and vector call instructions toward the highest address within the program area. The
memory space of the MB89560A series is structured as illustrated below.
Memory space
MB89567A, MB89567AC
0000 H
MB89P568-101,102
0000 H
0000 H
0080 H
0080 H
RAM
0100 H
0100 H
0200 H
0200 H
0480 H
0480 H
*2
0492 H
Register
Register
Register
0480 H
RAM
RAM
0100 H
0200 H
I/O
I/O
I/O
0080 H
MB89PV560-101,102
*2
0492 H
Access
prohibited
Access
prohibited
0492 H
*2
Access
prohibited
2000 H
4000 H
8000 H
ROM
FFC0 H
FFFF H
FFC0 H
FFFF H
Vector table
(Reset • Interrupt • Vector call instruction)
*1 : MB89P568-101,102 has OTP ROM inside.
*2 : Wild register setting registers
20
External*1
ROM
External*1
ROM
FFC0 H
FFFF H
MB89560A Series
2. Registers
The F2MC-8L family has two types of registers; dedicated registers in the CPU and general-purpose registers
in the memory. The following registers are provided:
Program counter (PC)
Accumulator (A)
: A 16-bit register for indicating specifies instruction storage positions.
: A 16-bit temporary register for storing arithmetic operations, etc. When the
instruction is an 8-bit data processing instruction, the lower byte is used.
Temporary accumulator (T): A 16-bit register which performs arithmetic operations with the accumulator when
the instruction is an 8-bit data processing instruction, the lower byte is used.
Index register (IX)
: A 16-bit register for index modification
Extra pointer (EP)
: A 16-bit pointer for indicating a memory address
Stack pointer (SP)
: A 16-bit register for indicating a stack area
Program status (PS)
: A 16-bit register for storing a register pointer, a condition code
16 bits
Initial value
: Program counter
PC
FFFDH
: Accumulator
Undefined
: Temporally accumulator
Undefined
: Indexing register
Undefined
: Extra pointer
Undefined
SP
: Stuck pointer
Undefined
PS
: Program status
I Flag = 0, IL1, 0 = 11
other bits are undefined.
A
IX
EP
The PS can further be divided into higher 8 bits for use as a register bank pointer (RP) and the lower 8 bits for
use as a condition code register (CCR). (See the diagram below.)
• Structure of program status
15
PS
14
13
12
11
10
9
8
Va- VaVacancy cancy cancy
RP
RP
7
6
H
I
5
4
IL1 IL0
3
2
1
0
N
Z
V
C
CCR
21
MB89560A Series
The RP indicates the address of the register bank currently in use. The relationship between the pointer contents
and the actual address is based on the conversion rule illustrated below.
• Rule for Conversion of Actual Addresses of the General-purpose Register Area
Operation Code
lower
RP Upper
Generated address
b0
"0" "0" "0" "0" "0" "0" "0"
"1" R4 R3 R2 R1 R0 b2
b1
A15 A14 A13 A12 A11 A10 A9
A8 A7 A6 A5 A4
A1 A0
A3 A2
The CCR consists of bits indicating the results of arithmetic operations and the contents of transfer data and
bits for control of CPU operations at the time of an interrupt.
H-flag : Set when a carry or a borrow from bit 3 to bit 4 occurs as a result of an arithmetic operation. Cleared
otherwise. This flag is for decimal adjustment instructions.
I-flag : Interrupt is allowed when this flag is set to 1. Interrupt is prohibited when the flag is set to 0. Set to 0
when reset.
IL1, 0 : Indicates the level of the interrupt currently allowed. Processes an interrupt only if its request level is
higher than the value indicated by this bit.
IL1
IL0
Interrupt level
High-low
0
0
0
1
1
0
2
1
1
3
1
High
Low = no interrupt
N-flag : Set if the MSB is set to 1 as the result of an arithmetic operation. Cleared when the bit is set to 0.
Z-flag : Set when an arithmetic operation results in 0. Cleared otherwise.
V-flag : Set if the complement on 2 overflows as a result of an arithmetic operation. Reset if the overflow does
not occur.
C-flag : Set when a carry or a borrow from bit 7 occurs as a result of an arithmetic operation. Cleared otherwise.
Set to the shift-out value in the case of a shift instruction.
The following general-purpose registers are provided :
General-purpose registers : An 8-bit resister for storing data
22
MB89560A Series
The general-purpose registers are 8 bits and located in the register banks of the memory. One bank contains
eight registers. Up to a total of 32 banks can be used. The bank currently in use is indicated by the register bank
pointer (RP).
• Register Bank Configuration
This address = 0100H+8× (RP)
R0
R1
R2
R3
R4
R5
R6
R7
32 bank (MB89567A/567AC)
Memory range
23
MB89560A Series
■ I/O MAP
Address
Register name
Register Description
00H
PDR0
Port 0 data register
01H
DDR0
Port 0 data direction register
02H
PDR1
Port 1 data register
03H
DDR1
Port 1 data direction register
04H to 06H
Read/Write
Initial value
R/W
XXXXXXXXB
W
00000000B
R/W
XXXXXXXXB
W
00000000B
(Vacancy)
07H
SYCC
System clock control register
R/W
XXXMM100B
08H
STBC
Standby control register
R/W
00010XXXB
09H
WDTC
Watchdog timer control register
W
0XXXXXXXB
0AH
TBTC
Timebase timer control register
R/W
00XXX000B
0BH
WPCR
Watch prescaler control register
R/W
00XX0000B
0CH
PDR2
Port 2 data register
R/W
XXXXXXXXB
0DH
DDR2
Port 2 data direction register
R/W
00000000B
0EH
PDR3
Port 3 data register
R/W
XXXXXX11B
0FH
PDR4
Port 4 data register
R/W
XXXXXXXXB
10H
DDR4
Port 4 direction register
R/W
XX000000B
11H
PDR5
Port 5 data register
R/W
00000000B
R/W
00000000B
12H
13H
(Vacancy)
PDR6
Port 6 data register
14H to 19H
(Vacancy)
1AH
T2CR
Timer2 control register
R/W
X00000X0B
1BH
T2DR
Timer2 data register
R/W
XXXXXXXXB
1CH
T1CR
Timer1 control register
R/W
X00000X0B
1DH
T1DR
Timer1 data register
R/W
XXXXXXXXB
UART1 mode control register 1
R/W
00000000B
1EH to 21H
(Vacancy)
22H
SMC11
23H
SRC1
UART1 mode data register
R/W
XX011000B
24H
SSD1
UART1 status/data register
R/W
00100X1XB
25H
SIDR1/SODR1
UART1 data register
R/W
XXXXXXXXB
26H
SMC12
UART1 mode control register 2
R/W
XX100001B
27H
CNTR1
PWM control register 1
R/W
00000000B
28H
CNTR2
PWM control register 2
R/W
000X0000B
29H
CNTR3
PWM control register 3
R/W
X000XXXXB
2AH
COMR1
PWM compare register 1
W
XXXXXXXXB
2BH
COMR2
PWM compare register 2
W
XXXXXXXXB
2CH
PCR1
R/W
000XX000B
PWC pulse width control register 1
(Continued)
24
MB89560A Series
Address
Register name
2DH
PCR2
2EH
RLBR
2FH
Register Description
Read/Write
Initial value
PWC pulse width control register 2
R/W
00000000B
PWC reload buffer register
R/W
XXXXXXXXB
SMC21
UART2/SIO mode control register
R/W
00000000B
30H
SMC22
UART2/SIO mode control register 2
R/W
00000000B
31H
SSD2
UART2/SIO status/data register
R/W
00001XXXB
32H
SIDR2/SODR2
UART2/SIO data register
R/W
XXXXXXXXB
33H
SRC2
UART2/SIO rate control register
R/W
XXXXXXXXB
34H
ADC1
A/D control register 1
R/W
X00000X0B
35H
ADC2
A/D control register 2
R/W
X0000001B
36H
ADDL
A/D data register L
R/W
XXXXXXXXB
37H
ADDH
A/D data register H
R/W
XXXXXXXXB
38H
RCR21
PPG control register 1(PPG2)
R/W
00000000B
39H
RCR23
PPG control register 3(PPG2)
R/W
0X000000B
3AH
RCR22
PPG control register 2(PPG2)
R/W
XX000000B
3BH
RCR24
PPG control register 4(PPG2)
R/W
XX000000B
3CH to 3EH
(Vacancy)
3FH
EIC1
External interrupt 1 control register 1
R/W
00000000B
40H
EIC2
External interrupt 1 control register 2
R/W
00000000B
41H
EIC3
External interrupt 1 control register 3
R/W
00000000B
42H
EIC4
External interrupt 1 control register 4
R/W
00000000B
43H to 50H
(Vacancy)
51H
IBSR
I2C bus status register
R
00000000B
52H
IBCR
I2C bus control register
53H
ICCR
R/W
00000000B
2
R/W
000XXXXXB
2
I C clock control register
54H
IADR
I C address register
R/W
XXXXXXXXB
55H
IDAR
I2C data register
R/W
XXXXXXXXB
56H
EIE2
External interrupt 2 enable register
R/W
XXXX0000B
57H
EIF2
External interrupt 2 flag register
R/W
XXXXXXX0B
58H
RCR1
PPG control register 1(PPG1)
R/W
00000000B
59H
RCR2
PPG control register 2(PPG1)
R/W
0X000000B
5AH
CKR
Clock Output control register
R/W
00000000B
5BH
LCR1
LCD controller/driver control register 1
R/W
00010000B
5CH
LCR2
LCD controller/driver control register 2
R/W
00000000B
5DH
LCR3
LCD controller/driver control register 3
R/W
XX000000B
5EH
LDR1
LCD data register 1
R/W
XXXXXXXXB
(Continued)
25
MB89560A Series
(Continued)
Address
Register name
Register Description
5FH
60H to 6BH
Initial value
R/W
XXXXXXXXB
(Vacancy)
VRAM
Display RAM
6CH to 6FH
(Vacancy)
70H
SMR
Serial I/O mode register
R/W
00000000B
71H
SDR
Serial I/O data register
R/W
XXXXXXXXB
72H
PURR0
Pull-up resistor register 0
R/W
11111111B
73H
PURR1
Pull-up resistor register 1
R/W
11111111B
74H
PURR2
Pull-up resistor register 2
R/W
11111111B
75H
PURR4
Pull-up resistor register 4
R/W
XX111111B
76H
(Vacancy)
77H
WREN
Wild register enable register
R/W
XX000000B
78H
WROR
Wild register data test register
R/W
XX000000B
79H
ADEN
A/D port input enable register
R/W
11111111B
7AH
(Vacancy)
7BH
ILR1
Interrupt level setting register 1
W
11111111B
7CH
ILR2
Interrupt level setting register 2
W
11111111B
7DH
ILR3
Interrupt level setting register 3
W
11111111B
7EH
ILR4
Interrupt level setting register 4
W
11111111B
7FH
ITR
Interrupt test register
Access
Prohibited
11111111B
Read/write access symbols
R/W : Readable and writable
R
: Read-only
W : Write-only
Initial value symbols
0 : The initial value of this bit is “0”.
1 : The initial value of this bit is “1”.
X : The initial value of this bit is undefined.
M : The initial value of this bit is determined by mask option.
Note : Do not use vacancies.
26
Read/Write
MB89560A Series
■ WILD REGISTER I/O MAP
Address
Register name
480H
WRARH1
481H
Register description
Read/Write
Initial value
Wild register high-byte address register1
R/W
XXXXXXXXB
WRARL1
Wild register low-byte address register1
R/W
XXXXXXXXB
482H
WRDR1
Wild register data register1
R/W
XXXXXXXXB
483H
WRARH2
Wild register high-byte address register2
R/W
XXXXXXXXB
484H
WRARL2
Wild register low-byte address register2
R/W
XXXXXXXXB
485H
WRDR2
Wild register data register2
R/W
XXXXXXXXB
486H
WRARH3
Wild register high-byte address register3
R/W
XXXXXXXXB
487H
WRARL3
Wild register low-byte address register3
R/W
XXXXXXXXB
488H
WRDR3
Wild register data register3
R/W
XXXXXXXXB
489H
WRARH4
Wild register high-byte address register4
R/W
XXXXXXXXB
48AH
WRARL4
Wild register low-byte address register4
R/W
XXXXXXXXB
48BH
WRDR4
Wild register data register4
R/W
XXXXXXXXB
48CH
WRARH5
Wild register high-byte address register5
R/W
XXXXXXXXB
48DH
WRARL5
Wild register low-byte address register5
R/W
XXXXXXXXB
48EH
WRDR5
Wild register data register5
R/W
XXXXXXXXB
48FH
WRARH6
Wild register high-byte address register6
R/W
XXXXXXXXB
490H
WRARL6
Wild register low-byte address register6
R/W
XXXXXXXXB
491H
WRDR6
Wild register data register6
R/W
XXXXXXXXB
Read/write access symbols
R/W : Readable and writable
R
: Read-only
W : Write-only
Initial value symbols
0 : The initial value of this bit is “0”.
1 : The initial value of this bit is “1”.
X : The initial value of this bit is undefined.
M : The initial value of this bit is determined by mask option.
Note : Do not use vacancies.
27
MB89560A Series
■ ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
(AVSS = VSS = 0.0 V)
Parameter
Power supply voltage
LCD power voltage
Program voltage
Input voltage
Output voltage
Symbol
Rating
Unit
Remarks
VSS + 6.0
V
VSS – 0.3
VSS + 6.0
V
MB89567A, MB89567AC,
MB89P568 and MB89PV560*1
AVR must not exceed “AVcc + 0.3V”.
V0 to V3
VSS – 0.3
VSS + 6.0
V
V0 to V3 should not exceed Vcc
Without booster
VPP
VSS – 0.6
VSS +13.0
V
Only for the MB89P568
VSS – 0.3
VCC + 0.3
V
For pins other than P30, P31, P46,
P47, P50 to P57 and P60 to P67
VSS – 0.3
VCC + 0.3
V
P50 to P57, P60 to P67
Resister Ladder option
VSS – 0.3
V3
V
P50 to P57, P60 to P67
LCD booster option
VSS – 0.3
VSS + 6.0
V
For P30, P31, P46, P47
VSS – 0.3
VCC + 0.3
V
For pins other than P30, P31, P46,
P47, P50 to P57 and P60 to P67
VSS – 0.3
VCC + 0.3
V
P50 to P57, P60 to P67
Resister Ladder option
VSS – 0.3
V3
V
P50 to P57, P60 to P67
LCD booster option
VSS – 0.3
VSS + 6.0
V
For P30, P31, P46, P47
15
mA
For pins other than P20 to P27
30
mA
For P20 to P27 only
4
mA
For pins other than P20 to P27*2
15
mA
For P20 to P27 only*2
Min
Max
VCC
AVCC
VSS – 0.3
AVR
VI
VO
“L” level maximum output current
IOL

“L” level average output current
IOLAV

“L” level total maximum output
current
∑IOL

100
mA
∑IOLAV

60
mA
*2
– 15
mA
For pins other than P20 to P27, P30,
P31, P46, P47, P50 to P57, P60 to
P67
– 30
mA
For P20 to P27 only
“L” level total average output
current
“H” level maximum output current
“H” level average output current
IOH
IOHAV


–4
– 15
mA
For pins other than P20 to P27*2
For P20 to P27 only*2
(Continued)
28
MB89560A Series
(Continued)
(AVSS = VSS = 0.0 V)
Parameter
Symbol
Rating
Unit
Min
Max
∑IOH

– 50
mA
∑IOHAV

– 30
mA
Power consumption
PD

300
mW
Operating temperature
TA
– 40
+ 85
°C
Tstg
– 55
+ 150
°C
“H” level total maximum output
current
“H” level total average output
current
Storage temperature
Remarks
*2
*1 : Use AVCC and VCC set at the same voltage.
Take care so that AVR does not exceed AVCC + 0.3 V, such as when power is turned on.
Take care so that AVCC does not exceed VCC, such as when power is turned on.
*2 : Average value (operating current × operating rate)
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
29
MB89560A Series
2. Recommended Operating Conditions
(AVSS = VSS = 0.0 V)
Parameter
Power supply voltage
LCD power voltage
A/D converter reference input
voltage
Operating temperature
Symbol
VCC
AVCC
Value
Unit
Remarks
Min
Max
2.2*
5.5*
V
For MB89567A and MB89567AC
1.5
5.5
V
Retains the RAM state in stop mode
for MB89567A and MB89567AC
2.7*
5.5*
V
For MB89PV560 and MB89P568
1.5
5.5
V
Retains the RAM state in stop mode
for MB89PV560 and MB89P568
Liquid crystal power supply range :
without booster
(The best value is according to the
specification of LCD used.)
V0 to V3
Vss
VCC
V
AVR
3.5
AVCC
V
TA
– 40
+ 85
°C
* : These values depend on the operating conditions and the analog assurance range. See Figure “Operating Voltage
vs. Main Clock Operating Frequency (MB89567A, MB89567AC) ”, “Operating Voltage vs. Main Clock Operating
Frequency (MB89P568/MB89PV560) ” and “6. A/D Converter Electrical Characteristics.”
30
MB89560A Series
“Operating Voltage vs. Main Clock Operating Frequency (MB89567A, MB89567AC) and “Operating Voltage vs.
Main Clock Operating Frequency (MB89P568/MB89PV560) indicate the operating frequency of the external oscillator at an instruction cycle of 4/FCH
Operating
Voltage (V)
A/D Converter accuracy assurance range: Vcc = AVcc =3.5 V to 5.5 V
5.5
5.0
Operation assurance range
4.0
3.5
3.0
2.7
2.2
2.0
Main clock
operating Freq. (MHz)
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
12.5
Min execution time
(inst. cycle) (µs)
4.0
2.0
0.8
0.4
0.32
Operating Voltage vs. Main Clock Operating Frequency (MB89567A, MB89567AC)
31
MB89560A Series
Operating
Voltage (V)
A/D Converter accuracy assurance range: Vcc = AVcc = 3.5 V to 5.5 V
5.5
5.0
Operation assurance range
4.5
4.0
3.5
3.0
2.7
2.5
2.2
Operation assurance : TA = −10 °C to +55 °C (Only for MB89P568)
2.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0 12.0
Main clock
operating Freq. (MHz)
11.0 12.5
Min execution time
(inst. cycle) (µs)
4.0
2.0
0.8
0.4
0.32
Operating Voltage vs. Main Clock Operating Frequency (MB89P568/MB89PV560)
Since the operating voltage range is dependent on the instruction cycle, see minimum execution time if the
operating speed is switched using a gear.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
32
MB89560A Series
3. DC Characteristics (power supply voltage : 5.0V)
Parameter
Symbol
Pin
(AVCC = VCC = 5.0 V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit
Remarks
Min
Typ
Max
VIH
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P31,
P40 to P45,
P50 to P57,
P60 to P67
—
0.7 VCC
—
VCC + 0.3
V
CMOS
VIHS
RST, MODA,
INT10 to INT17,
INT20 to INT23,
SI,SCK,EC1,UCK,
SCK1,UI,SI1,PWC
—
0.8 VCC
—
VCC + 0.3
V
Hysteresis
—
VSS +1.4
—
VSS + 5.5
V
SMB input
buffer selected
—
0.7 VCC
—
VSS + 5.5
V
I2C input buffer
selected
VIL
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P31,
P40 to P45,
P50 to P57,
P60 to P67
—
VSS − 0.3
—
0.3 VCC
V
CMOS
VILS
RST, MODA,
INT10 to INT17,
INT20 to INT23,
SI,SCK,EC1,UCK,
SCK1,UI,SI1,PWC
—
VSS − 0.3
—
0.2 VCC
V
Hysteresis

VSS − 0.3
—
VSS + 0.6
V
SMB input
buffer selected
—
VSS − 0.3
—
0.3 VCC
V
I2C input buffer
selected
P60 to P67,
P50 to P57
—
VSS − 0.3
—
VCC + 0.3
V
Resister
Ladder option
P60 to P67,
P50 to P57
—
VSS − 0.3
—
V3
V
LCD booster
option
P46, P47, P30,
P31
—
VSS − 0.3
—
VSS + 5.5
V
P00 to P07,
P10 to P17,
P40 to P45
IOH = –2.0 mA
4.0
—
—
P20 to P27
IOH = –15.0 mA
4.0
—
—
“H” level
input voltage
VIHSMB
SCL, SDA
VIHI2C
“L” level
input voltage
VILSMB
SCL, SDA
VILI2C
Open-drain
output pin
application
voltage
“H” level
output
voltage
VD
VOH
V
(Continued)
33
MB89560A Series
Parameter
“L” level
output
voltage
Input leakage
current
(High-Z
output
leakage
current)
Open-drain
output
leakage
current
Symbol
VOL
Pin
P00 to P07,
P10 to P17,
P30, P31,
P40 to P47,
P50 to P57,
P60 to P67,
RST
IOL = 4.0 mA
—
—
0.4
P20 to P27
IOL = 15.0 mA
—
—
0.4
−5
—
+5
µA
Without
pull-up
Resistor
−5
—
+5
µA
Resistor
Ladder
option
P00 to P07,
P10 to P17,
P20 to P27,
P40 to P45
ILI
ILIOD
P50 to P57,
P60 to P67
0.0 V < VI < V3
−5
—
+5
µA
LCD booster
option
MODA
0.0 V < VI < VCC
− 10
—
+10
µA
MB89PV560
MB89P568
P50 to P57,
P60 to P67
0.0 V < VI < VCC
—
—
+5
µA
Resistor
Ladder
option
P50 to P57,
P60 to P67
0.0 V < VI < V3
—
—
+5
µA
LCD booster
option
P30, P31,
P46, P47
0.0 V < VI < Vss
+ 5.5 V
—
—
+5
µA
Pull-up
resistance
RPULL
Pull-down
resistance
RMODA
MODA
ICC1
ICC2
ICCS1
34
V
0.0 V < VI < VCC
P50 to P57,
P60 to P67
P00 to P07,
P10 to P17,
P20 to P27,
P40 to P45,
RST
Power supply
current *1
(AVCC = VCC = 5.0 V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit
Remarks
Min
Typ
Max
VCC
VI = 0.0 V
25
50
100
kΩ
When pull-up
resistor
selected
except RST
VI = 3.0 V
50
100
200
kΩ
MB89567A/
MB89567AC
FCH = 10 MHz,
tinst*2 = 0.4 µs,
Main clock run
mode
—
15
20
—
8
13
MB89567A
MB89567AC
FCH = 10 MHz,
tinst*2 = 6.4 µs,
Main clock run
mode
—
5
8.5
MB89PV560
MB89P568
—
1
3
MB89567A
MB89567AC
FCH = 10 MHz,
tinst*2 = 0.4 µs,
Main clock sleep
mode
—
5
7
MB89PV560
MB89P568
—
2.5
5
mA
mA
mA
MB89PV560
MB89P568
MB89567A
MB89567AC
(Continued)
MB89560A Series
(Continued)
Parameter
(AVCC = VCC = 5.0 V, , AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Symbol
Pin
FCH = 10 MHz,
tinst*2 = 6.4 µs,
Sleep mode
ICCS2
FCL = 32.768
kHz,
Subclock mode,
TA = +25 °C
ICCL
Power supply
current *1
VCC
ICCLS
ICCH
LCD divided
resistance
RLCD
FCL = 32.768
kHz,
Subclock sleep
mode,
TA = +25 °C
FCL = 32.768
kHz,
TA = +25 °C,
Watch mode,
Main clock stop
mode
ICCT
Power supply
current *1
Condition
VCC
—
TA = +25 °C,
Subclock stop
mode
Between
VCC and VSS
Value
Unit
Typ
Max
—
1.5
3
—
0.7
2
—
3
7
mA
MB89PV560
MB89P568
—
50
85
µA
MB89567A
MB89567AC
—
30
50
mA
µA
—
MB89PV560
MB89P568
MB89567A
MB89567AC
MB89PV560
MB89P568
MB89567A
MB89567AC
15
30
5
15
µA
MB89PV560
MB89P568
1.6
15
µA
MB89567A
MB89567AC
3
10
µA
MB89PV560
MB89P568
1
10
µA
MB89567A
MB89567AC
300
500
750
kΩ
—
—
5
kΩ
—
—
15
kΩ
—
—
COM0 to COM3
output
impedance
RVCOM
SEG0 to SEG23
output
impedance
RVSEG
SEG0 to SEG23
LCD controller/
driver leakage
current
ILCDL
V0 to V3,
COM0 to COM3,
SEG0 to SEG23
—
−1
—
1
µA
Input
capacitance
CIN
Other than AVCC,
AVSS, VCC, and
f = 1 MHz
VSS
—
10
—
pF
COM0 to COM3
Remarks
Min
V1 to V3 = 5.0 V
*1 : The power supply current is measured at the external clock
*2 : For information on tinst, see “5. AC Characteristics (4) Instruction Cycle.”
Note : For LCD and port multiplex pin (P50 to P57, P60 to P67), please refer to LCD specification when the port is
used, and refer to LCD specification when used as LCD pin.
35
MB89560A Series
4. DC Characteristics (power supply voltage : 3.0V)
Parameter
Symbol
Pin
(AVCC = VCC = 3.0V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit
Remarks
Min
Typ
Max
VIH
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P31,
P40 to P45,
P50 to P57,
P60 to P67
—
0.7 VCC
—
VCC + 0.3
V
CMOS
VIHS
RST, MODA,
INT10 to INT17,
INT20 to INT23,
SI,SCK,EC1,UCK,
SCK1,UI,SI1,PWC
—
0.8 VCC
—
VCC + 0.3
V
Hysteresis
—
VSS +1.4
—
VSS + 5.5
V
SMB input
buffer selected
—
0.7 VCC
—
VSS + 5.5
V
I2C input buffer
selected
VIL
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P31,
P40 to P45,
P50 to P57,
P60 to P67
—
VSS − 0.3
—
0.3 VCC
V
CMOS
VILS
RST, MODA,
INT10 to INT17,
INT20 to INT23,
SI,SCK,EC1,UCK,
SCK1,UI,SI1,PWC
—
VSS − 0.3
—
0.2 VCC
V
Hysteresis
—
VSS - 0.3
—
VSS + 0.6
V
SMB input
buffer selected
—
VSS − 0.3
—
0.3 VCC
V
I2C input buffer
selected
P60 to P67,
P50 to P57
—
VSS − 0.3
—
VCC + 0.3
V
Resistor
Ladder option
P60 to P67,
P50 to P57
—
VSS − 0.3
—
V3
V
LCD booster
option
P46, P47, P30,
P31
—
VSS − 0.3
—
VSS + 5.5
V
P00 to P07,
P10 to P17,
P40 to P45
IOH = –2.0 mA
2.4
—
—
P20 to P27
IOH = –10 mA
2.4
—
—
“H” level
input voltage
VIHSMB
SCL, SDA
VIHI2C
“L” level
input voltage
VILSMB
SCL, SDA
VILI2C
Open-drain
output pin
application
voltage
“H” level
output
voltage
VD
VOH
V
(Continued)
36
MB89560A Series
Parameter
“L” level
output
voltage
Input leakage
current
(Hi-z output
leakage
current)
Open-drain
output
leakage
current
Symbol
VOL
Pin
P00 to P07,
P10 to P17,
P30, P31,
P40 to P47,
P50 to P57,
P60 to P67,
RST
IOL = 4.0 mA
—
—
0.4
P20 to P27
IOL = 10 mA
—
—
0.4
–5
—
+5
µA
Without
pull-up
Resister
–5
—
+5
µA
Resister
Ladder
option
P00 to P07,
P10 to P17,
P20 to P27,
P40 to P45
ILI
ILIOD
V
0.0 V < VI < VCC
P50 to P57,
P60 to P67
P50 to P57,
P60 to P67
0.0 V < VI < V3
–5
—
+5
µA
LCD booster
option
MODA
0.0 V < VI < VCC
–10
—
+10
µA
MB89PV560
MB89P568
P50 to P57,
P60 to P67
0.0 V < VI < VCC
—
—
+5
µA
Resister
Ladder
option
P50 to P57,
P60 to P67
0.0 V < VI < V3
—
—
+5
µA
LCD booster
option
P30, P31,
P46, P47
0.0 V < VI < Vss
+ 5.5 V
—
—
+5
µA
Pull-up
resistance
RPULL
P00 to P07,
P10 to P17,
P20 to P27,
P40 to P45,
RST
Pull-down
resistance
RMODA
MODA
ICC1
Power supply
current *1
(AVCC = VCC = 3.0V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit
Remarks
Min
Typ
Max
VI = 0.0 V
50
100
200
kΩ
When pull-up
resistor
selected
except RST
VI = 5.0 V
25
50
100
kΩ
MB89567A
MB89567AC
FCH = 10 MHz,
tinst*2 = 0.4 µs,
Main clock run
mode
—
6
10
4
9
MB89567A
MB89567AC
FCH = 10 MHz,
tinst*2 = 6.4 µs,
Main clock run
mode
—
1.5
3
MB89PV560
MB89P568
—
mA
VCC
ICC2
—
mA
0.4
2
MB89PV560
MB89P568
MB89567A
MB89567AC
(Continued)
37
MB89560A Series
(Continued)
Parameter
Symbol
Pin
ICCS1
ICCS2
VCC
ICCT
ICCH
LCD divided
resistance
COM0 to COM3
output impedance
RLCD
RVCOM
—
—
1
3
MB89567A
MB89567AC
FCH = 10 MHz,
tinst*2 = 6.4 µs,
Main clock
sleep mode
—
1
2
MB89PV560
MB89P568
FCL = 32.768
kHz,
Subclock sleep
mode ,
TA = +25 °C
ICCLS
—
MB89PV560
MB89P568
FCH = 10 MHz,
tinst*2 = 0.4 µs,
Main clock
sleep mode
FCL = 32.768
kHz,
Subclock
mode,
TA = +25 °C
ICCL
Power supply
current *1
(AVCC = VCC = 3.0 V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit
Remarks
Min
Typ
Max
2
4
mA
mA
0.3
1.5
—
1
3
mA
MB89PV560
MB89P568
—
25
60
µA
MB89567A
MB89567AC
—
15
30
—
8
25
5
15
µA
MB89PV560
MB89P568
1
14
µA
MB89567A
MB89567AC
µA
FCL = 32.768
kHz,
TA = +25 °C,
Watch mode,
Main clock stop
mode
—
TA = +25 °C,
Subclock stop
mode
—
1
5
µA
Between VCC
and VSS
300
500
750
kΩ
—
—
5
kΩ
—
—
15
kΩ
–1
—
1
µA
—
10
—
pF
COM0 to COM3
MB89567A
MB89567AC
—
MB89PV560
MB89P568
MB89567A
MB89567AC
V1 to V3 = 3.0 V
SEG0 to 23 output
RVSEG
impedance
SEG0 to SEG23
LCD controller/
driver leakage
current
ILCDL
V0 to V3,
COM0 to COM3,
SEG0 to SEG23
Input
capacitance
CIN
Other than AVCC,
AVSS, VCC, and
f = 1 MHz
VSS
—
*1 : The power supply current is measured at the external clock
*2 : For information on tinst, see “5. AC Characteristics (4) Instruction Cycle.”
Note : For LCD and port multiplex pin (P50 to P57, P60 to P67), please refer to LCD specification when the port is
used, and refer to LCD specification when used as LCD pin.
38
MB89560A Series
5. AC Characteristics
(1) Reset Timing
Parameter
(VCC = 5.0 V, AVSS = VSS = 0.0 V, TA = −40 °C to +85 °C)
Value
Condition
Unit
Remarks
Min
Max
Symbol
RST “L” pulse width
tZLZH
—
48 tHCYL
—
ns
Notes : • tHCYL is the oscillation cycle (1/FCH) to input to the X0 pin.
• If the reset pulse applied to the external reset pin (RST) does not meet the specifications, it may cause
malfunctions. Use caution so that the reset pulse less than the specifications will not be fed to the external
reset pin (RST) .
t ZLZH
RST
0.2 V CC
0.2 V CC
(2) Power-on Reset
Parameter
(AVSS = VSS = 0.0 V, TA = −40 °C to +85 °C)
Symbol
Power supply rising time
tR
Power supply cut-off time
tOFF
Condition
—
Value
Unit
Min
Max
0.5
50
ms
1
—
ms
Remarks
Due to repeated operations
Note : Make sure that power supply rises within the selected oscillation stabilization time.
For example, when the main clock is operating at 10 MHz (FCH) and the oscillation stabilization time select
option has been set to 218/FCH, the oscillation stabilization delay time is 26.2 ms. Therefore, the maximum
value of power supply rising time is about 26.2 ms.
Rapid changes in power supply voltage may cause a power-on reset. If power supply voltage needs to be
varied in the course of operation, a smooth voltage rise is recommended.
tOFF
tR
2.0 V
VCC
0.2 V
0.2 V
0.2 V
39
MB89560A Series
(3) Clock Timing
(AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Unit
Remarks
Typ
Max
Symbol
Pin
FCH
X0, X1
1
—
12.5
FCL
X0A, X1A
—
32.768
—
kHz
tHCYL
X0, X1
80
—
1000
ns
Main clock
tLCYL
X0A, X1A
—
30.5
—
µs
Subclock
Input clock pulse width
PWH
PWL
X0
20
—
—
ns
External clock
Input clock rising/falling time
tCR
tCF
X0
—
—
10
ns
External clock
Parameter
Clock frequency
Clock cycle time
Min
MHz Main clock
X0 and X1 Timing and Conditions
tHCYL
PWH
PWL
tCF
tCR
0.8 VCC
0.8 VCC
X0
0.2 VCC
0.2 VCC
0.2VCC
Main Clock Conditions
When using a crystal oscillator
or ceramic oscillator
X0
When using an external clock
X0
X1
X1
Open
FCH
C1
40
C2
FCH
Subclock
MB89560A Series
X0A and X1A Timing
tLCYL
0.7 VCC
0.7 VCC
X0A
0.3 VCC
0.3 VCC
0.3 VCC
When using a crystal oscillator
X0A
X1A
FCL
C1
C2
Note : External clock is not available.
(4) Instruction Cycle
Parameter
Instruction cycle
(minimum execution time)
(AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Symbol
Value
Unit
4/FCH, 8/FCH, 16/FCH, 64/FCH
µs
tinst = 0.32 µs when operating
at FCH = 12.5 MHz (4/FCH)
2/FCL
µs
tinst = 61.036 µs when
operating at FCL = 32.768 kHz
tinst
Remarks
41
MB89560A Series
(5) Serial I/O Timing
Symbol
Pin
Serial clock cycle time
tSCYC
SCK, SCK1, UCK
SCK ↓ → SO time
tSLOV
SCK, SO, SCK1,
SO1, UCK, UO
Parameter
Valid SI → SCK ↑
tIVSH
SI, SCK, SI1,
SCK1, UI, UCK
SCK ↑ → valid SI hold time
tSHIX
SCK, SI, SCK1,
SI1, UCK, UI
Serial clock “H” pulse width
tSHSL
Serial clock “L” pulse width
tSLSH
SCK ↓ → SO time
tSLOV
SCK, SO, SCK1,
SO1, UCK, UO
Valid SI → SCK ↑
tIVSH
SI, SCK, SI1,
SCK1, UI, UCK
SCK ↑ → valid SI hold time
tSHIX
SCK, SI, SCK1,
SI1, UCK, UI
Internal shift
clock mode
SCK, SCK1, UCK
* : For information on tinst, see “(4) Instruction Cycle.”
42
(Vcc = 5.0V, AVSS = VSS= 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit Remarks
Min
Max
External shift
clock mode
2 tinst*
—
µs
–200
+200
ns
200
—
ns
200
—
ns
1 tinst*
—
µs
1 tinst*
—
µs
0
200
ns
200
—
ns
200
—
ns
MB89560A Series
Internal Shift Clock Mode
tSCYC
SCK
SCK1
UCK
0.8 VCC
0.2 VCC
0.2 VCC
tSLOV
0.8 VCC
SO
SO1
UO
0.2 VCC
tIVSH
SI
SI1
UI
tSHIX
0.8 VCC
0.8 VCC
0.2 VCC
0.2 VCC
External Shift Clock Mode
tSLSH
tSHSL
SCK
SCK1
UCK
0.8 VCC
0.2 VCC
tSLOV
0.8VCC
SO
SO1
UO
0.2 VCC
tIVSH
SI
SI1
UI
Parameter
Symbol
Peripheral input “H” pulse width 1
tILIH1
tIHIL1
tSHIX
0.8 VCC
0.8 VCC
0.2 VCC
0.2 VCC
(6) Peripheral Input Timing
Peripheral input “L” pulse width 1
0.8 VCC
0.2 VCC
(Vcc = 5.0V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Pin
Condition
Unit Remarks
Min
Max
INT10 to INT17,
INT20 to INT23,
EC, PWC
—
2 tinst*
—
µs
2 tinst*
—
µs
* : For information on tinst, see “(4) Instruction Cycle.”
tIHIL1
INT10
INT17,
INT20 INT23,
EC,PWC
tILIH1
0.8 VCC
0.2 VCC
0.8 VCC
0.2 VCC
43
MB89560A Series
(7) I2C timing
(Vcc = 5.0 V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Unit Remarks
Min
Max
Parameter
Symbol
Pin
Condition
Start condition output
tSTA
SCL
SDA
—
Stop condition output
tSTO
SCL
SDA
—
Start condition detect
tSTA
SCL
SDA
—
1/4 tinst × 6 + 40
—
ns
Stop condition detect
tSTO
SCL
SDA
—
1/4 tinst × 6 + 40
—
ns
Re-start condition
output
tSTASU
SCL
SDA
—
Re-start condition
detect
tSTASU
SCL
SDA
—
1/4 tinst × 4 + 40
—
ns
SCL output LOW
width
tLOW
SCL
—
1/4 tinst ×
M*2 × N*3 - 20
1/4 tinst ×
M*2 × N*3 + 20
ns
Master
mode
SCL output HIGH
width
tHIGH
SCL
—
ns
Master
mode
SDA output delay
tDO
SDA
—
1/4 tinst × 4 - 20
1/4 tinst × 4 + 20
ns
SDA output setup
time after interrupt
tDOSU
SDA
—
1/4 tinst × 4 - 20
—
ns
SCL input LOW
pulse width
tLOW
SCL
—
1/4 tinst × 6 + 40
—
ns
SCL input HIGH
pulse width
tHIGH
SCL
—
1/4 tinst × 2 + 40
—
ns
SDA input setup time
tSU
SDA
—
40
—
ns
SDA hold time
tHO
SDA
—
0
—
ns
1/4 tinst*1 ×
M*2 x N*3 - 20
1/4 tinst ×
M*2 x N*3 + 20
1/4 tinst ×
1/4 tinst ×
(M*2 × N*3 + 8) - 20 (M*2 × N*3 + 8) + 20
1/4 tinst ×
1/4 tinst ×
(M*2 × N*3 + 8) - 20 (M*2 × N*3 + 8) + 20
1/4 tinst ×
1/4 tinst ×
(M*2 × N*3 + 8) - 20 (M*2 × N*3 + 8) + 20
ns
Master
mode
ns
Master
mode
ns
Master
mode
*4
*1 : For information in tinst, see " (4) Instruction Cycle".
*2 : M is defined in the ICCR CS4 and CS3 (bit 4 to bit 3) . For details, please refer to the H/W manual register
explanation.
*3 : N is defined in the ICCR CS2 to CS0 (bit 2 to bit 0) .
*4 : When the interrupt period is greater than SCL "L" width, SDA and SCL output (Standard) value is based on
hypothesis when rising time is 0 ns.
44
MB89560A Series
Data transmit (master/slave)
tDO
tDO
tHO
tSU
SDA
tDOSU
ACK
tSTASU tSTA
tLOW
SCL
tHO
9
1
Data receive (master/slave)
tSU
tDO
tHO
SDA
tDOSU
ACK
tHIGH
SCL
tDO
6
7
tSTO
tLOW
8
9
45
MB89560A Series
6. A/D Converter Electrical Characteristics
(1) For MB89567A/AC A/D Converter
Parameter
Symbol
Pin
Resolution
(AVcc = 2.7 V to 5.5 V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit
Remarks
Min
Typ
Max
—
Total error
Non-linearity error
—
Differential
linearity error
Zero transition
voltage
VOT
Full-scale
transition voltage
VFST
AVR=AVCC
—
Interchannel
disparity
A/D mode
conversion time *3
—
10
bit
—
—
±3.0
LSB
—
—
±2.5
LSB 1LSB = AVR/1024
—
—
±1.9
LSB
AVss –
1.5 LSB
AVss +
0.5 LSB
AVss +
2.5 LSB
mV
AVR –
3.5 LSB
AVR –
1.5 LSB
AVR +
1.5 LSB
mV
—
—
4
—
60 tinst*1
—
—
inst 1
16 t *
—
—
—
10
µA
AVss
—
AVR
V
—
4
6
when A/D
mA conversion is
activated
—
1
5
when A/D
µA conversion is
stopped
AVss+3.5
—
AVCC
V
—
200
—
µA
—
—
5
µA *2
IAIN
Analog input
voltage
VAIN
AN0
to
AN7
IA
Power supply
current
—
AVCC
IAH
—
IR
IRH
TA = +25 °C
—
AVR A/D is Activated
A/D is Stopped
*1 : For information on tinst, see “(4) Instruction Cycle” in “5. AC Characteristics.”
*2 : When A/D conversion is not in operation, and the CPU is in STOP mode.
*3 : Included sampling time
46
LSB 1LSB = AVR/1024
—
Analog port input
current
Reference
voltage supply
current
—
µs
A/D Sampling
time
Reference
voltage
—
MB89560A Series
(2) For MB89P568/PV560 A/D Converter
Parameter
Symbol
Pin
Resolution
(AVcc=3.5 V to 5.5 V, AVSS = VSS = 0.0 V, TA = –40 °C to +85 °C)
Value
Condition
Unit Remarks
Min
Typ
Max
—
—
—
10
bit
—
—
±3.0
LSB
—
—
±2.5
1LSB =
LSB AVR/1024
—
—
±1.9
LSB
AVss – 1.5
LSB
AVss +
0.5 LSB
AVss +
2.5 LSB
mV
AVR – 3.5
LSB
AVR –
1.5 LSB
AVR +
1.5 LSB
mV
—
—
4
LSB
—
60 tinst*1
—
—
inst 1
16 t *
—
—
—
10
µA
AVss
—
AVR
V
—
4
6
when A/D
mA conversion
is activated
—
1
5
when A/D
µA conversion
is stopped
AVss + 3.5
—
AVCC
V
A/D is
Activated
—
400
—
µA
A/D is
Stopped
—
—
5
µA *2
Total error
—
Non-linearity error
Differential linearity
error
Zero transition voltage
AVR=AVCC
VOT
—
Full-scale transition
voltage
VFST
Interchannel disparity
A/D mode conversion
time *3
—
A/D Sampling time
—
Analog port input current
IAIN
Analog input voltage
VAIN
AN0 to
AN7
IA
—
AVCC
Power supply current
TA = +25 °C
IAH
Reference voltage
Reference voltage
supply current
—
IR
IRH
—
AVR
1LSB =
AVR/1024
µs
*1 : For information on tinst, see “(4) Instruction Cycle” in “5. AC Characteristics.”
*2 : When A/D conversion is not in operation, and the CPU is in STOP mode.
*3 : Included sampling time
47
MB89560A Series
(3) A/D Converter Glossary
• Resolution
Analog changes that are identifiable with the A/D converter.
• Linearity error
The deviation of the straight line connecting the zero transition point (“00 0000 0000” ↔ “00 0000 0001”) with
the full-scale transition point (“11 1111 1110” ↔ “11 1111 1111”) from actual conversion characteristics
• Differential linearity error
The deviation of input voltage needed to change the output code by 1 LSB from the theoretical value
• Total error (unit: LSB)
The difference between theoretical and actual conversion values caused by the zero transition error, full-scale
transition error, linearity error, quantization error, and noise
Theoretical I/O characteristics
3FF
Total error
3FF
VFST
3FD
3FD
1.5 LSB
Digital Output
Digital Output
Actual Conversion
Characteristic
3FE
3FE
004
003
VOT
002
{1 LSB × N + 0.5 LSB}
004
VNT
003
Actual Conversion
Characteristic
Theoretical Conversion
Characteristic
002
1 LSB
001
001
0.5 LSB
AVR
AVSS
Analog Input
1 LSB =
VFST − VOT
1022
AVR
AVSS
Analog Input
(V)
VNT − {1 LSB × N + 0.5 LSB}
1 LSB
Total error for digital output N =
(Continued)
48
MB89560A Series
(Continued)
Zero transition error
Theoretical
Characteristic
Actual Conversion
Characteristic
003
002
3FE
VFST
(actual measured
value)
Actual Conversion
Characteristic
3FD
Actual Conversion
Characteristic
001
Actual Conversion
Characteristics
3FF
Digital Output
Digital Output
004
Full-scale transition error
3FC
VOT (actual measured value)
AVR
AVSS
Linearity error
Differential linearity error
Actual Conversion
Characteristic
3FF
N+1
{1 LSB × N + VOT}
3FD
VFST
VNT
(actual measured
value)
004
003
Actual Conversion
Characteristic
002
Theoretical Characteristic
001
VOT
Digital Output
Digital Output
3FE
Actual Conversion
Characteristic
N
N−1
VNT (actual measured
value)
Actual Conversion
Characteristic
N−2
(actual measured value)
AVR
AVSS
AVR
AVSS
V(N + 1)T
Analog Input
Analog Input
Linearity error in digital output N = VNT − {1 LSB × N + 0.5 LSB}
1 LSB
Differential linearity error in digital output N =
V(N + 1)T − VNT
−1
1 LSB
49
MB89560A Series
(4) Precautions
• The smaller the | AVR–AVSS | is, the greater the error would become relatively.
• The output impedance of the external circuit for the analog input must satisfy the following conditions :
Output impedance of the external circuit < Approx. 10 kΩ
• If the output impedance of the external circuit is too high, an analog voltage sampling time might be insufficient.
Analog Input equivalent circuit
Sample hold circuit *
.
C =. 45 pF
Analog input pin
Comparator
If the analog input impedance
is higher than 10 kΩ, it is
recommended to connect an
external capacitor of approx.
0.1 µF.
.
R =. 2.2 kΩ
Close for 8 instruction cycles
after starting A/D conversion.
Analog channel selector
* : The value of R and C at the sample hold circuit depends on the following.
MB89567A/MB89567AC : R =: 2.2 kΩ, C =: 45 pF
MB89P568/MB89PV560 : R =: 1.4 kΩ, C =: 64 pF
50
MB89560A Series
■ EXAMPLE CHARACTERISTICS
(1) “L” Level Output Voltage
VCC - VOL1 vs. IOL
VCC = 4.0 V VCC = 5.0 V
VCC = 2.5 V VCC = 3.0 V
VCC = 3.5 V VCC = 4.5 V VCC = 5.5 V
VCC = 6.0 V
VCC = 6.5 V
1.0
0.9
VCC - VOL1 (V)
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
2
4
6
8
10
12
14
16
18
20
IOL (mA)
(2) “H” Level Output Voltage
VCC - VOH1 (V)
VCC - VOH1 vs. IOH
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
VCC = 3.5 V
VCC = 4.0 V
VCC = 4.5 V
VCC = 5.0 V
VCC = 5.5 V
VCC = 6.0 V
VCC = 6.5 V
0
-2
-4
-6
-8
-10
IOH (mA)
51
MB89560A Series
(3) “H” Level Input Voltage / “L” Level Input Voltage
CMOS input
Hysteresis input
5.0
5.0
4.5
4.5
TA = + 25 °C
4.0
3.5
VIHS
3.5
3.0
VIN (V)
VIN (V)
TA = + 25 °C
4.0
2.5
2.0
3.0
2.5
1.5
2.0
1.0
1.5
0.5
1.0
0.0
1
2
3
4
VCC (V)
5
6
7
VILS
0.5
0.0
1
2
3
4
VCC (V)
5
6
7
VIHS : Threshold when input voltage in hysteresis
characteristics is set to “H” level.
VILS : Threshold when input voltage in hysteresis
characteristics is set to “L” level.
52
MB89560A Series
(4) Power Supply Current (External Clock)
ICC1 vs. VCC
ICC2 vs. VCC
(Mask ROM products)
(Mask ROM products)
1.2
15
TA = + 25 °C
TA = + 25 °C
FCH = 12.5 MHz
12
FCH = 10.0 MHz
0.8
ICC2 (mA)
ICC1 (mA)
FCH = 12.5 MHz
1.0
9
FCH = 10.0 MHz
6
FCH = 4.2 MHz
3
0.6
FCH = 4.2 MHz
0.4
FCH = 3.0 MHz
FCH = 3.0 MHz
0.2
FCH = 1.0 MHz
FCH = 1.0 MHz
0
0.0
0
1
4.0
2
3
4
5
6
7
VCC (V)
0
1
2
4
VCC (V)
ICCS1 vs. VCC
(Mask ROM products)
ICCS2 vs. VCC
(Mask ROM products)
0.7
TA = + 25 °C
3.5
5
6
7
TA = + 25 °C
0.6
FCH = 12.5 MHz
3
FCH = 12.5 MHz
FCH = 10.0 MHz
2.5
2.0
1.5
FCH = 4.2 MHz
1.0
0.5
ICCS2 (mA)
ICCS1 (mA)
3.0
FCH = 10.0 MHz
0.4
0.3
FCH = 4.2 MHz
0.2
FCH = 3.0 MHz
FCH = 3.0 MHz
0.1
0.5
FCH = 1.0 MHz
FCH = 1.0 MHz
0.0
0.0
0
1
2
3
4
5
6
0
7
VCC (V)
1
2
3
4
VCC (V)
6
7
ICCT vs. VCC
ICCL vs. VCC
(Mask ROM products)
(Mask ROM products)
4.0
100
TA = + 25 °C
3.6
TA = + 25 °C
3.2
80
60
FCL = 32.768 kHz
40
ICCT (µA)
2.8
ICCL (µA)
5
FCL = 32.768 kHz
2.4
2.0
1.6
1.2
20
0.8
0
0.4
0.0
0
1
2
3
4
VCC (V)
5
6
7
0
1
2
3
4
VCC (V)
5
6
7
(Continued)
53
MB89560A Series
(Continued)
ICCLS (µA)
ICCLS vs. VCC
(Mask ROM products)
22
20
18
16
14
12
10
8
6
4
2
0
TA = + 25 °C
0
1
2
3
4
VCC (V)
5
6
7
IR vs. AVR
IA VS. AVCC
4.0
3.5
3.0
200
180
TA = + 25 °C
160
140
FCH = 10.0 MHz
IR (µA)
IA (mA)
2.5
2.0
TA = + 25 °C
120
100
80
1.5
60
1.0
40
0.5
20
0.0
0
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
AVCC (V)
AVR (V)
(5) Pull-up Resistance
Rpull vs.VCC
210
190
Rpull (kΩ)
170
150
130
110
90
70
TA = + 93 °C
50
TA = + 25 °C
30
TA = − 40 °C
10
2
54
3
4
5
VCC (V)
6
7
8
MB89560A Series
■ MASK OPTIONS
Model
MB89567A
MB89567AC
MB89P568
MB89PV560
Specification method
Specify when
ordering mask.
Setting
unavailable.
Setting
unavailable.
No.
1
Main clock oscillation stabilization delay
time initial value* selection (FCH = 10 MHz)
• 01: 214/FCH (Approx. 1.6 ms)
Selectable
• 10: 217/FCH (Approx. 13.1 ms)
• 11: 218/FCH (Approx. 26.2 ms)
218/FCH (Approx.
26.2 ms)
218/FCH (approx.
26.2 ms)
2
LCD driving power supply
• On-chip voltage booster
• Internal voltage divider (external divider
resistors can be used)
-101
Internal voltage
divider
-102
On-chip voltage
booster
-101
Internal voltage
divider
-102
On-chip voltage
booster
Selectable
■ ORDERING INFORMATION
Part number
MB89567APFV
MB89567ACPFV
MB89P568PFV-101
MB89567APFV
MB89567ACPFV
MB89P568PFV-102
MB89567APF
MB89567ACPF
MB89P568PF-101
MB89567APF
MB89567ACPF
MB89P568PF-102
MB89567APFM
MB89567ACPFM
MB89P568PFM-101
MB89567APFM
MB89567ACPFM
MB89P568PFM-102
MB89PV560CF-101
MB89PV560CF-102
Package
80-pin Plastic LQFP
(FPT-80P-M05)
Remarks
Without Booster
Resistor divider
With Booster
80-pin Plastic QFP
(FPT-80P-M06)
Without Booster
Resistor divider
With Booster
80-pin Plastic LQFP
(FPT-80P-M11)
Without Booster
Resistor divider
With Booster
80-pin Ceramic MQFP
(MQP-80C-P01)
Without Booster
Resistor divider
With Booster
55
MB89560A Series
■ PACKAGE DIMENSIONS
80-pin plastic LQFP
(FPT-80P-M05)
*Pins width and pins thickness include plating thickness.
14.00±0.20(.551±.008)SQ
12.00±0.10(.472±.004)SQ
60
0.145±0.055
(.006±.002)
41
40
61
0.08(.003)
Details of "A" part
+0.20
1.50 –0.10
+.008
.059 –.004
INDEX
0°~8°
0.10±0.10
(.004±.004)
(Stand off)
21
80
"A"
LEAD No.
1
20
0.50(.020)
C
(Mounting height)
0.20±0.05
(.008±.002)
0.08(.003)
0.50±0.20
(.020±.008)
0.60±0.15
(.024±.006)
0.25(.010)
M
2000 FUJITSU LIMITED F80008S-c-3-7
Dimensions in mm (inches)
(Continued)
56
MB89560A Series
80-pin plastic QFP
(FPT-80P-M06)
*Pins width and pins thickness include plating thickness.
23.90±0.40(.941±.016)
20.00±0.20(.787±.008)
64
41
65
40
0.10(.004)
17.90±0.40
(.705±.016)
14.00±0.20
(.551±.008)
INDEX
Details of "A" part
80
25
0.25(.010)
+0.30
3.05 –0.20
+.012
.120 –.008
(Mounting height)
1
24
0.80(.031)
"A"
C
0.37±0.05
(.015±.002)
0.20(.008)
0~8°
M
0.17±0.06
(.007±.002)
0.80±0.20
(.031±.008)
0.88±0.15
(.035±.006)
+0.10
0.30 –0.25
+.004
.012 –.010
(Stand off)
2001 FUJITSU LIMITED F80010S-c-4-4
Dimensions in mm (inches)
(Continued)
57
MB89560A Series
80-pin plastic LQFP
(FPT-80P-M11)
*Pins width and pins thickness include plating thickness.
16.00±0.20(.630±.008)SQ
0.145±0.055
(.006±.002)
14.00±0.10(.551±.004)SQ
60
41
61
40
0.10(.004)
Details of "A" part
+0.20
+.008
1.50 –0.10 .059 –.004
(Mounting height)
0.25(.010)
INDEX
0~8°
80
21
1
0.65(.026)
C
"A"
20
0.32±0.05
(.013±.002)
0.13(.005)
0.50±0.20
(.020±.008)
0.60±0.15
(.024±.006)
0.10±0.10
(.004±.004)
(Stand off)
M
2001 FUJITSU LIMITED F80016S-c-2-5
Dimensions in mm (inches)
(Continued)
58
MB89560A Series
(Continued)
80-pin ceramic
(MQP-80C-P01)
18.70(.736)TYP
12.00(.472)TYP
INDEX AREA
16.30±0.33
(.642±.013)
15.58±0.20
(.613±.008)
1.50(.059)TYP
1.00(.040)TYP
4.50(.177)
TYP
+.016
.047 –.008
1.27±0.13
(.050±.005)
22.30±0.33
(.878±.013)
24.70(.972)
TYP
0.30(.012)
TYP
0.80±0.25
(.0315±.010)
0.80±0.25
(.0315±.010)
+0.40
1.20 –0.20
INDEX AREA
18.12±0.20
12.02(.473)
(.713±.008)
TYP
10.16(.400)
14.22(.560)
TYP
TYP
18.40(.724)
REF
INDEX
1.27±0.13
(.050±.005)
6.00(.236)
TYP
0.30(.012)TYP
7.62(.300)TYP
9.48(.373)TYP
11.68(.460)TYP
0.40±0.10
(.016±.004)
1.50(.059)
TYP
1.00(.040)
TYP
0.40±0.10
(.016±.004)
+0.40
1.20 –0.20
+.016
.047 –.008
0.15±0.05 8.70(.343)
(.006±.002) MAX
C
1994 FUJITSU LIMITED M80001SC-4-2
Dimensions in mm (inches)
59
MB89560A Series
FUJITSU LIMITED
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
The products described in this document are designed, developed
and manufactured as contemplated for general use, including
without limitation, ordinary industrial use, general office use,
personal use, and household use, but are not designed, developed
and manufactured as contemplated (1) for use accompanying fatal
risks or dangers that, unless extremely high safety is secured, could
have a serious effect to the public, and could lead directly to death,
personal injury, severe physical damage or other loss (i.e., nuclear
reaction control in nuclear facility, aircraft flight control, air traffic
control, mass transport control, medical life support system, missile
launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial
satellite).
Please note that Fujitsu will not be liable against you and/or any
third party for any claims or damages arising in connection with
above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You
must protect against injury, damage or loss from such failures by
incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Law of Japan, the prior
authorization by Japanese government will be required for export
of those products from Japan.
F0208
 FUJITSU LIMITED Printed in Japan
Similar pages