Accutek Microcircuit Corporation AK491024S / AK491024G 1,048,576 Word x 9 Bit CMOS Dynamic Random Access Memory DESCRIPTION Front View The Accutek AK491024 high density memory module is a random access memory organized in 1 Meg x 9 bit words. The assembly consists of nine standard 1 Meg x 1 DRAMs in plastic leaded chip carriers (SOJ) mounted on the front side of a printed circuit board. The module can be configured as a leadless 30 pad SIM or a leaded 30 pin SIP. This packaging approach provides a 6 to 1 density increase over standard DIP packaging. 30-Pin SIM 30 1 30-Pin SIP The operation of the AK491024 is identical to nine 1 Meg x 1 DRAMs. For the lower eight bits data input is tied to the data output and brought out separately for each device, with common RAS, CAS control. This common I/O feature dictates the use of early-write cycles to prevent contention of D and Q. Since the Write-Enable (WE) signal must always go low before CAS in a write cycle, Read-Write and Read-Modify-Write operation is not possible. For the ninth bit, the data input (D9) and the data output (Q9) pins are brought out separately and controlled by a separate PCAS for that bit. Bit nine is generally used for parity. 1 FEATURES · 1,048,576 x 9 bit organization · Optional 30 Pad leadless SIM (Single In-Line Module) or 30 Pin leaded SIP (Single In-Line Package) · JEDEC standard pinout · Operating free air temperature 00C to 700C · Common CAS and RAS control for the lower eight bits · Upward compatible with AK594096 and AK5916384 · Separate PCAS control for D9 and Q9 · Downward compatible with AK49256 · CAS-before-RAS refresh PIN NOMENCLATURE · Power 3.465 Watt Max Active (80 nSEC) 2.97 Watt Max Active (100 nSEC) 2.475 Watt Max Active (120 nSEC) 49.5 mW Max Standby PIN ASSIGNMENT FUNCTIONAL DIAGRAM PIN # SYMBOL PIN # SYMBOL 1 Vcc 16 DQ5 DQ1 - DQ8 Data In / Data Out D9 Data In 9 2 CAS 17 A8 Q9 Data Out 9 3 DQ1 18 A9 A0 - A9 Address Inputs 4 A0 19 NC 5 A1 20 DQ6 CAS, PCAS Column Address Strobe 6 DQ2 21 WE RAS Row Address Strobe 7 A2 22 Vss WE Write Enable DQ7 8 A3 23 9 Vss 24 NC DQ8 Vcc 5v Supply 10 DQ3 25 Vss Ground 11 A4 26 Q9 12 A5 27 RAS 13 DQ4 28 PCAS 14 A6 29 D9 15 A7 30 Vcc NC No Connect MODULE OPTIONS Leadless SIM: AK491024S Leaded SIP: AK491024G MECHANICAL DIMENSIONS ORDERING INFORMATION PART NUMBER CODING INTERPRETATION Position 1 2 3 6 Inches 7 8 0.425 0.375 .100 .060 0.325 0.275 1 1 3.525 3.475 3.100 3.090 30 0.200 MAX 0.053 0.047 Product AK = Accutek Memory Type 4 = Dynamic RAM 5 = CMOS Dynamic RAM 6 = Static RAM Organization/Word Width 1 = by 1 16 = by 16 4 = by 4 32 = by 32 8 = by 8 36 = by 36 9 = by 9 Size/Bits Depth 64 = 64K 4096 = 4 MEG 256 = 256K 8192 = 8 MEG 1024 = 1 MEG 16384 = 16 MEG Package Type G = Single In-Line Package (SIP) S = Single In-Line Module (SIM) D = Dual In-Line Package (DIP) W = .050 inch Pitch Edge Connect Z = Zig-Zag In-Line Package (ZIP) Special Designation P = Page Mode N = Nibble Mode K = Static Column Mode W = Write Per Bit Mode V = Video Ram Separator - = Commercial 00C to +700C M = Military Equivalent Screened (-550C to +1250C) I = Industrial Temperature Tested (-450C to +850C) X = Burned In Speed (first two significant digits) DRAMS SRAMS 50 = 50 nS 8 = 8 nS 60 = 60 nS 10 = 10 nS 70 = 70 nS 12 = 12 nS 80 = 80 nS 15 = 15 nS 0.815 0.785 8 5 0.024 0.016 7 4 0.100 TYP 6 3 0.100 TYP 5 2 0.815 0.785 4 1 0.100 TYP The numbers and coding on this page do not include all variations available but are show as examples of the most widely used variations. Contact Accutek if other information is required. EXAMPLES: AK491024SP-80 1 Meg x 9, 80 nSEC DRAM 30 pin SIM Configuration, Page Mode AK491024GN-70 1 Meg x 9, 70 nSEC Dram 30 pin SIP Configuration, Nibble Mode ACCUTEK MICROCIRCUIT CORPORATION BUSINESS CENTER at NEWBURYPORT 2 NEW PASTURE ROAD, SUITE 1 NEWBURYPORT, MA 01950-4054 VOICE: 978-465-6200 FAX: 978-462-3396 Email: [email protected] Internet: www.accutekmicro.com Accutek reserves the right to make changes in specifications at any time and without notice. Accutek does not assume any responsibility for the use of any circuitry described; no circuit patent licenses are implied. Preliminary data sheets contain minimum and maximum limits based upon design objectives, which are subject to change upon full characterization over the specific operating conditions.