Double Balanced Mixer Model MM6xxG-10 Multi-Octave Band RF 2.0 to 12.0 GHz Electrical Specifications : (1) Specifications Conditions Parameter SSB Conversion loss: (2) (3) RF (GHz) 2.0-12.0 2.0-12.0 2.0-12.0 Isolation LO to RF: IF (MHz) DC-500 DC-1200 DC-1500 Typical 6.0 dB 7.0 dB 7.5 dB Min 25 20 18 20 2.0-7.5 7.5-12.0 2.0-3.0 3.0-12.0 LO to IF: RF to IF: LO (GHz) 2.0-12.0 2.0-12.0 2.0-12.0 39 30 25 35 22 dB dB dB dB 2.0-12.0 Input 1-dB Compression Point: 2.0-12.0 2.0-12.0 DC-1500 Input Third Order Intercept Point: 2.0-12.0 2.0-12.0 DC-1500 LO Power: (4) 2.0-12.0 2.0-12.0 DC-1500 Max 8.0 dB 9.5 dB 10.0 dB dB dB dB dB dB +1 dBm +4 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +22 dBm MM63 MM64 MM66 MM67 MM63 MM64 MM66 MM67 +7 dBm +10 dBm +14 dBm +19 dBm MM63 MM64 MM66 MM67 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Model MM6xxG-10 LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Typical Performance at 25˚C Outline: G MM6xxG-10 SPECTRUM 50 All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001