Preset counters electronic 2 presets, meter counters PTB approved Display LED, 8-digits, programmable NE215 Features –– PTB Meter counter with two presets –– Display 8-digits –– Batch counter, totalizer, hour conter –– Measurements in cm and mm –– Connection: PTB encoder –– Batch counter with preset and multiplier –– Interface RS232 or RS422/RS485 NE215 - PTB Preset counter Technical data - electrical ratings Technical data - electrical ratings Voltage supply PTB approval 1.3 / 93.15 Approvals UL/cUL, CE conform 85...265 VAC (50/60 Hz) 24/48 VAC ±10 % (50/60 Hz) 24 VDC ±10 % Power consumption 7 VA, 6 W Sensor supply 12...26 VDC / max. 80 mA Display LED, 7-segment display Operating temperature 0...+50 °C Number of digits 6-digits (totalizer) 8-digits (preset counter) Storing temperature -20...+70 °C Relative humidity 80 % non-condensing Digit height 7.6 mm E-connection Plug-in screw terminals Function Preset counter Main counter with 2 presets Batch counter with 1 preset Totalizer Hour counter Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 face with seal Operation / keypad 10 figure keypad with 5 function keys Housing type Built-in housing Dimensions W x H x L 72 x 72 x 105 mm Installation depth 105 mm Mounting Clip frame Cutout dimensions 68 x 68 mm (+0.7) Materials Housing: Makrolon 6485 (PC) Keypad: Polyester Weight approx. 450 g (AC), 320 g (DC) Multitplier / batch counter 1...999 Count mode A 90° B phase evaluation Counting frequency Approx. 10 kHz Operating mode Step preset Data memory >10 years in EEPROM Reset Button, electric or automatic Outputs relay Potential-free change-over contact for main counter Normally open/closed potentialfree for B1 Output holding time 0.01...99.99 s Interfaces RS232, RS485 Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Programmable parameters Scaling factor Sensor logic Printer trigger 1 www.baumerivo.com Subject to modification in technic and design. Errors and omissions excepted. 0.0001...9999.99 30/10/2008 Scaling factor Technical data - mechanical design Preset counters electronic 2 presets, meter counters PTB approved Display LED, 8-digits, programmable NE215 Block circuit diagram Connection diagram max. 265 V 14 XP-reset 16 15 Scaling on B1-reset +24V 0V 17 B1 counter 19 18 NPN Br. 18-20 PNP Br. 18-19 T,R- RS485 20 Sensor supply 21 T,R+ 22 terminal - terminal 13 B Voltage supply 12 - 2 + 3 A 12 B 13 19 20 Totalizer A Count Count XP-reset 14 Scaling on 15 Sensor supply + Output A 90° B 4 Main counter with 2 presets and scaling factor 5 P1 6 7 - terminal 8 P2 9 B1 8 7 6 P2 P1 Output 4 3 2 1 23 B1-counter 16 B1-reset 17 Coding for input logic NPN Br. 18-20 PNP Br. 18-19 18 T,R- 21 T,R+ 22 TxD 23 RxD 25 GND 26 Batch counter as preselection counter or tachometer with 1 preset multiplier 10 B1 11 Operating time meter Interface RS485 TxD 24 RxD GND 26 25 5 RS232 Interface RS232 Trigger level Optocoupler inputs Input circuit Control inputs PNP- / NPN-logic Count input Trigger current 9...16 mA Switch-off current <0.5 mA Input resistance 1.65 kΩ Reset input Trigger current 5...8 mA Switch-off current <0.5 mA Input resistance 3.3 kΩ Relay outputs Output circuit Switching voltage max. 250 VAC / 110 VDC Switching current max. 1A Switching capacity max. 150 VA / 30 W Relay responding time 5 ms Electronical outputs Output circuit PNP-switching transistor Open collector Switching voltage 24 VDC ±20 % Switching current max. 10 mA (AC) 50 mA (DC) NPN-switching transistor Open collector 2 Switching voltage max. 35 V Switching current max. 50 mA www.baumerivo.com Subject to modification in technic and design. Errors and omissions excepted. 9 30/10/2008 10 Supply voltage 11 Preset counters electronic 2 presets, meter counters PTB approved Display LED, 8-digits, programmable NE215 Part number NE215. 1 AX0 Display 5 In cm, 9999.99 50 pulses/rev. w/o interface/RS232 6 In mm, 999.999 500 pulses/rev. w/o interface/RS232 7 In cm, 9999.99 50 pulses/rev. at RS232/RS485 8 In cm, 999.999 500 pulses/rev. at RS232/RS485 Voltage supply 1 24 / 48 VAC 2 85...265 VAC 3 24 VDC Outputs 1 Relay outputs, B1 normally closed Interface 0 Without interface 1 RS232 2 RS232/RS485 Dimensions 18.5 1-6 7 3 www.baumerivo.com 30/10/2008 105 67.7 72 72 Subject to modification in technic and design. Errors and omissions excepted. 108 Preset counters electronic 2 presets, meter counters PTB approved Display LED, 8-digits, programmable 4 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. NE215