TIGER ELECTRONIC CO.,LTD DF0 0 5S THRU DF1 0S Voltage Range 50 to 1000 Volts Current 1.0 Amperes Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers DBS Features .013(0.33) .0088(0.22) • UL Recognized File # E-230084 • Ideal for printed circuit board • Reliable low cost construction technique .060(1.53) .040(1.02) - + results in inexpensive product • High temperature soldering guaranteed: .013(0.33) .003(0.076) .255(6.5) .404(10.3) .245(6.2) .386(9.80) ~ ~ 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension .043(1.10) .028(0.70) .205(5.2) .195(5.0) Mechanical Data .335(8.51) .320(8.13) • Case: Molded plastic • Lead: solder plated • Polarity: As marked 45° .130(3.30) .120(3.05) .047(1.20) .040(1.02) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current @TA = 40℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ rated DC blocking voltage per leg TA = 125℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range VRRM VRMS VDC DF 005S DF 01 S DF 02 S DF 04 S DF 06 S DF 08 S DF 10 S UNITS 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V I(AV) 1.0 A IFSM 50 A VF 1.1 V IR 10 500 μA RθJA RθJL 40 15 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ NOTE：Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.with 0.47×0.47”(12×12mm) Copper Pads. RATING AND CHARACTERISTIC CURVES DF 005S THRU DF 10S Page 2 of 2 http://www.21yangjie.com