GP15A THRU GP15M GLASS PASSIVATED JUNCTION RECTIFIER * Reverse Voltage - 50 to 1000 Volts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.5 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension N T E D DO-204AC P A T E 0.034 (0.86) 1.0 (25.4) MIN. Forward Current - 1.5 Amperes 0.028 (0.71) DIA. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Case: JEDEC DO-204AC molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GP 15A GP 15B Maximum repetitive peak reverse voltage VRRM 50 100 200 400 Maximum RMS voltage VRMS 35 70 140 280 Maximum DC blocking voltage VDC 50 100 200 400 600 Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 1.5 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps VF 1.1 Volts IR(AV) 100.0 µA IR 5.0 200.0 µA Typical reverse recovery time (NOTE 1) trr 2.0 µs Typical junction capacitance (NOTE 2) CJ 15.0 pF RΘJA RΘJL 45.0 20.0 °C/W TJ, TSTG -65 to +175 °C Maximum instantaneous forward voltage at 1.5A Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length atTA=55°C Maximum reverse current at rated DC blocking voltage TA= 25°C TA=150°C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range GP 15D GP 15G NOTES: (1) Reverse recovery conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 GP 15J GP 15K GP 15M 600 800 1000 Volts 420 560 700 Volts 800 1000 Volts UNITS RATINGS AND CHARACTERISTIC CURVES GP15A THRU GP15M 1.5 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 HZ RESISTIVE OR INDUCTIVE LOAD 1.25 50 1.0 0.75 0.5 0.25 0.375"(9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 175 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 20 10 0 AMBIENT TEMPERATURE, °C 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PULSE WIDTH=300µs 1% DUTY CYCLE TJ=150°C 1 TJ=25°C 0.1 0.01 0.4 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0.6 0.8 1.0 1.2 1.4 0 1.6 FIG. 5 - TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE (°C/W) JUNCTION CAPACITANCE, pF 60 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 REVERSE VOLTAGE, VOLTS 100 100 10 1 0.1 0.01 0.1 1 t, PULSE DURATION, sec 1 80 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 10 1 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS 30 20 100 10 100