GP10A THRU GP10M C R GP S E M I C O N D U C T O R GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current -1.0Ampere FEATURES DO-41 GPRC( Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 １．０（２５．４） ＭＩＮ JF 1.0Ampere operation at Ta=75℃ and 55℃ with no thermal runaway ０．１０７（２．７） ０．０８０（２．０） ＤＩＡ Typical IR less than 0.1uA High temperature soldering guaranteed:260℃ /10 seconds Plastic Package has Under writers Laboratory Flammability Classtification 94V-0 ０．２０５（５．２０） ０．１８０（４．１０） MECHANICAL DATA Case: JEDEC DO-41 molded plastic body Terminals: Lead solderable per MIL-STD-750,method 2026 １．０（２５．４） ＭＩＮ Polarity: Color band denotes cathode end ０．０３４（０．８５） ０．０２８（０．７１） ＤＩＡ Mounting Position: Any Weight: 0.012ounce, 0.33 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ) Symbols GP 10A GP 10B GP 10D GP 10G GP 10J GP 10K GP 10M 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 Unis Maximum DC Blocking Voltage VRRM VRMS VDC Maximum average Forward Rectified Current 0.375"(9.5mm) lead length at TA=75 C I(AV) 1.0 Amp Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) TA=75 C IFSM 30.0 Amps VF 1.0 Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum Instantaneous Forward Voltage at 1.0 A Maximum Reverse current at rated DC Blocking Voltage TA =25 C TA =100 C Typical Thermal resistance (Note 2) 5.0 IR R R A 50.0 JA 55.0 JL 25.0 Volts Volts Volts C/W Typical Junction Capacitance(Note 1) CJ 10.0 PF Maximum DC Blocking Voltage temperature TA TJ TSTG +150 C -50 to+175 C Operating and Storage temperature Range Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length, P.C.B. mounted 7-10 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM SILICON RECTIFIER Ｒ SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES GP10A THRUGP10M FIG.1-FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS ０．８ INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT AMPERES １．０ ０．６ ０．４ SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD ０．２ ０ ０ ２５ ５０ ７５ １００ １２５ １５０ １７５ LEAD TEMPERATURE ( C) ２０ １０ １ TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE ０．１ ０．０１ FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT ０．６ ０．８ １．０ １．２ １．４ １．５ INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) ４０ ３０ FIG.4-TYPICAL REVERSE CHARACTERISTICS ２０ １０ １０ INSTANTANEOUS REVERSE CURRENT ( A) PEAK FORWARD SURGE CURRENT(AMPERES) ５０ ０ １ １０ １００ NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) １００ TJ=100 C １．０ ０．１ TJ=25 C ０．０１ ０ ２０ ４０ ６０ ８０ １００ １２０ １４０ TJ=25 C PERCENT OF RATED PEAK REVERSE VOLTAGE % １０ １ ０．１ １ １０ １００ REVERSE VOLTAGE. (VOLTS) 7-11 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD PR CHINA TEL:86-531-6943657 FAX:86-531-6947096 WWW.JIFUSEMICON.COM