TECHNICAL DATASHEET Rev. D ELANC SERIES 4:1 Input Voltage Ranges Single and Dual Outputs “Economy” Version of LANC Series 6 Watt DC/DC Power Converters FEATURES 6 Watts Single and Dual Outputs 4:1 Wide Input Voltage Range Meets IEC/EN60950 and UL60950 Safety Standards RoHS Compliant High Efficiency up to 83% Industry Standard Footprint: 1.25” x 0.8” x 0.4” Low Output Ripple & Noise MTBF > 2,000,000 Hours Economy Version of the LANC Series DESCRIPTION The ELANC series of DC/DC power converters provides 6 watts of output power in an industry standard 1.25" x 0.80" x 0.40" package and footprint. This series has single and dual output models with 4:1 input voltage ranges of 9-36VDC and 18-75VDC. Some features include high efficiency, low ripple and noise, and an MTBF > 2,000,000 hours. All models are RoHS compliant and meet IEC/EN60950 and UL60950 safety standards. The ELANC series is the "Economy" version of the LANC series. 03/13/2013 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 ELANC Series Single and Dual Outputs 6 Watt DC/DC Power Converters “Economy” Version of the LANC Series Rev. D SPECIFICATIONS: ELANC SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS TEST CONDITIONS 12VDC nominal input models 48VDC nominal input models Input Voltage Range OUTPUT SPECIFICATIONS Output Voltage Line Regulation Single Output Models Load Regulation Dual Output Models Voltage Setpoint Accuracy Voltage Adjustment Output Current Output Power Single Output Models Ripple & Noise Dual Output Models Temperature Coefficient DYNAMIC RESPONSE Single Output Models Load Step / V Dual Output Models Single Output Models Recovery Time Dual Output Models ISOLATION VOLTAGE Single Output Models Input to Output Dual Output Models Single Output Models Input to Case Dual Output Models Single Output Models Output to Case Dual Output Models GENERAL SPECIFICATIONS Efficiency ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Range Operating Board Temperature Range Storage Temperature Range MTBF PHYSICAL SPECIFICATIONS Min Nom Max Unit 9 18 12 48 36 75 VDC -3.0 20MHz Bandwidth -0.02 %Vo %Vo %Vo mVp-p %Vo %/°C 200 5% 200 < 300 50%~75%~50% Io, di/dt=1A/10µS mV Vo µS µS 500 1500 500 1500 500 1500 For 1 minute For 1 minute For 1 minute VDC VDC VDC See Table -40 -40 -55 +85 +100 +125 > 2,000,000 hours °C °C °C 1.25 x 0.8 x 0.4 inches (31.80 x 20.30 x 10.16 mm) Dimensions (L x W x H) SAFETY Safety Approvals 03/13/2013 See Table 0.5 1.0 2.0 +3.0 none See Table See Table 60 0.5 +0.02 IEC/EN60950, UL60950 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 ELANC Series Single and Dual Outputs 6 Watt DC/DC Power Converters “Economy” Version of the LANC Series Rev. D MODEL SELECTION TABLES SINGLE OUTPUT MODELS Model Input Voltage ELANC1233UW6 Output Voltage Output Current Output Power Efficiency 3.3 VDC 2A 6.6W 78% ELANC1205UW6 12 VDC 5 VDC 1.2 A 6W 80% ELANC1212UW6 (9 – 36 VDC) 12 VDC 0.5 A 6W 82% ELANC1215UW6 15 VDC 0.4 A 6W 82% ELANC4833UW5 3.3 VDC 1.5 A 5W 76% ELANC4805UW6 48 VDC 5 VDC 1.2 A 6W 80% ELANC4812UW6 (18 – 75 VDC) 12 VDC 0.5 A 6W 82% 15 VDC 0.4 A 6W 83% ELANC4815UW6 DUAL OUTPUT MODELS Model Input Voltage ELANC1205DUW6 12 VDC ELANC1212DUW6 (9 – 36 VDC) ELANC1215DUW6 ELANC4805DUW6 48 VDC ELANC4812DUW6 (18 – 75 VDC) ELANC4815DUW6 Output Voltage Output Current Output Power Efficiency ±5 VDC ±0.6 A 6W 80% ±12 VDC ±0.25 A 6W 82% ±15 VDC ±0.2 A 6W 83% ±5 VDC ±0.6 A 6W 81% ±12 VDC ±0.25 A 6W 82% ±15 VDC ±0.2 A 6W 82% MECHANICAL DRAWING Unit: inches (mm) 1.250 (31.75) 16 14 2 9 11 0.600 (15.24) 23 22 0.100 (2.54) 0.200 (5.08) 0.100 (2.54) 0.800 (20.32) 0.100 (2.54) 3 0.350 (8.90) + 0.05 8 - Ø 0.8 - 0.05 0.250 (6.35) Tolerance: .XX±0.02 (.X±0.5) .XXX±0.01 (.XX±0.25) Pin Length: 0.19 (4.8) 0.19 (4.8) 0.400 (10.16) Top View 03/13/2013 + 0.05 8 - Ø 0.5 - 0.05 Pin 2 3 9 11 14 16 22 23 PIN CONNECTIONS Single Dual -Vin -Vin -Vin -Vin No Pin COM No Connect -Vo +Vo +Vo -Vo COM +Vin +Vin +Vin +Vin Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 Rev. D ELANC Series Single and Dual Outputs 6 Watt DC/DC Power Converters “Economy” Version of the LANC Series COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 03/13/2013 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4