Fujitsu FBR211NCD009 Miniature relay 1 pole-1 to 2 a (for signal switching) Datasheet

MINIATURE RELAY
1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)
FBR211 SERIES
RoHS compliant
n FEATURES
l
l
l
l
l
l
l
l
2 A maximum carrying current
Capable of 2 A maximum continuous carrying current in the
contact
Superior reliability gold-overlay contacts
P type: Gold-overlay silver-palladium contacts
International terminal pitch of one inch grid terminal layout
High sensitivity, low power dissipation types also available
Standard types: 0.45 W (A or B type)
High sensitivity types: 0.2 W (C or E type)
Conforms to FCC 68.302 (high dielectric strength type)
UL recognized (File number E63615)
CSA recognized (File number LR64026)
RoHS compliant since date code: 0433A
Please see page 5 for more information
To
be
Di
n ORDERING INFORMATION
[Example]
FBR211 S A
(a)
(b) (c)
D012
(d)
sc
U – P
(e) (f )
2
(g)
on
(–CSA)
(h)
ti
nu
(a)
Series Name
(b)
Enclosure
FBR211
(c)
Coil Power and Schematics
A: Standard A type (nominal power 450 mW type)
B: Standard B type
C: High sensitivity C type (nominal power 200 mW type)
E: High sensitivity E type
S: Flux free type
N: Plastic sealed type
}
}
ed
(d)
Nominal Voltage
(Example) D003: 3 VDC
D012: 12 VDC (refer to the COIL DATA CHART)
(e)
UL Marking on Cover
Nil : No UL marking
U : UL marking
(f )
Contact Material
P : Gold-overlay silver-palladium
M : Gold-overlay silver
(g)
Special Type
Nil : Standard
2 : High dielectric strength type
(h)
CSA Marking
Nil
: Standard
-CSA : UL + CSA marking (valid when (e) is U)
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR211SAD005-P
Stamp: 211SAD005-P
1
FBR211 SERIES
n COIL DATA CHART
1. STANDARD (A or B type)
MODEL
Nominal
Nominal
Coil
current
Must
Must
Maximum Nominal
A type
B type
resistance
(at
nominal
operate
release
allowable
voltage
power
(±10%)
voltage)
voltage
voltage
voltage
Flux free Plastic sealed Flux free Plastic sealed
approx.
FBR211SAD001-n FBR211NAD001-n FBR211SBD001-n FBR211NBD001-n
1.5 VDC
5Ω
300 mA
FBR211SAD003-n FBR211NAD003-n FBR211SBD003-n FBR211NBD003-n
3 VDC
20 Ω
150 mA
Coil
temperature
rise
FBR211SAD005-n FBR211NAD005-n FBR211SBD005-n FBR211NBD005-n
5 VDC
56 Ω
89 mA
70% max. 10% min. 150% of
Approx.
Approx.
FBR211SAD006-n FBR211NAD006-n FBR211SBD006-n FBR211NBD006-n
6 VDC
80 Ω
75 mA of nominal of nominal nominal
450 mW
45 deg
voltage
voltage
voltage (at nominal (at nominal
FBR211SAD009-n FBR211NAD009-n FBR211SBD009-n FBR211NBD009-n
9 VDC
180 Ω
50 mA
voltage)
voltage)
To
FBR211SAD012-n FBR211NAD012-n FBR211SBD012-n FBR211NBD012-n
12 VDC
320 Ω
38 mA
FBR211SAD024-n FBR211NAD024-n FBR211SBD024-n FBR211NBD024-n
24 VDC
1,280 Ω
19 mA
be
Note: All values in the table are measured at 20°C.
2. HIGH SENSITIVITY (C or E type)
Di
MODEL
Nominal
Nominal
Coil
current
Must
Must
Maximum Nominal
C type
E type
resistance (at nominal operate
release allowable
voltage
power
(±10%)
voltage)
voltage
voltage
voltage
Flux free Plastic sealed Flux free Plastic sealed
approx.
sc
FBR211SCD001-n FBR211NCD001-n FBR211SED001-n FBR211NED001-n
1.5 VDC
12 Ω
125 mA
FBR211SCD003-n FBR211NCD003-n FBR211SED003-n FBR211NED003-n
3 VDC
45 Ω
67 mA
on
Coil
temperature
rise
FBR211SCD005-n FBR211NCD005-n FBR211SED005-n FBR211NED005-n
5 VDC
120 Ω
42 mA
70% max. 10% min. 225% of
Approx.
Approx.
FBR211SCD006-n FBR211NCD006-n FBR211SED006-n FBR211NED006-n
6 VDC
180 Ω
33 mA of nominal of nominal nominal
200 mW
25 deg
voltage
voltage
voltage (at nominal (at nominal
FBR211SCD009-n FBR211NCD009-n FBR211SED009-n FBR211NED009-n
9 VDC
400 Ω
23 mA
voltage)
voltage)
FBR211SCD012-n FBR211NCD012-n FBR211SED012-n FBR211NED012-n
12 VDC
700 Ω
17 mA
FBR211SCD024-n FBR211NCD024-n FBR211SED024-n FBR211NED024-n
24 VDC
2,800 Ω
9 mA
Note: All values in the table are measured at 20°C.
ti
nu
ed
FBR211 SERIES
n SPECIFICATIONS
Item
Contact
Standard (A or B type)
High sensitive (C or E type)
Arrangement
1 form C (SPDT)
Material
Gold-overlay silver-palladium / gold-overlay silver
Resistance (initial)
Maximum 100 mΩ (at 0.1 A 6 VDC)
Rating (resistive)
0.5 A 120 VAC or 1 A 28 VDC
Maximum Carrying Current
2A
Coil
To
Maximum Switching Power
60 VA or 28 W
Max. Switching Voltage*
220 VAC or 150 VDC
1
Maximum Switching Current
1.25 A (AC) or 2 A (DC)
Minimum Switching load*
(reference)
Plastic sealed 1 mA, 1V Flux free 1 mA, 5V
be
2
Nominal Power (at 20°C)
Approximately 450 mW
Di
Approximately 200 mW
Operate Power (at 20°C)
Approximately 315 mW maximum
Approximately 140 mW maximum
Operating Temperature
–25°C to +55°C (no frost)
–25°C to +75°C (no frost)
Operating Humidity
45 to 85%RH
Time Value
Life
Maximum 5 ms
Release (at nominal voltage)
Maximum 5 ms
Mechanical
5 × 106 operations minimum
Electrical
(Refer to the REFERENCE DATA)
Other
sc
Operate (at nominal voltage)
on
3 × 105 operations minimum (at 1 A/ 28 VDC resistive load)
1 × 105 operations minimum (at 2 A/ 12 VDC resistive load)
1 × 105 operations minimum (at 0.5 A/120 VDC resistive load)
ti
nu
Vibration Resistance
10 to 55 Hz (double amplitude of 1.5 mm)
Shock
Resistance
Misoperation
100 m/s2 (11±1 ms)
Endurance
1,000 m/s2 (11±1 ms)
Weight
Approximately 4 g
60 m/s2 (11±1 ms)
ed
*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type
of load.
*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum
switching load varies with the switching frequency and operation environment.
n INSULATION
Item
Standard (A or B)
Isolation (initial)
Minimum 100 MΩ (at 500VDC)
Dielectric
Strength
500VAC 1 min. (standard)
1,500VAC 1 min. (high isolation coil and contact)
n SAFETY STANDARDS
High sensitive (C or E)
Type
Compliance
Contact rating
UL
UL 110
E63615
CSA
C22.2 No. 14
LR 40304, LR 46016
Flammability: UL 94-V0 (plastics)
0.5A, 120VAC (resistive)
1A, 28VDC (resistive)
FBR211 SERIES
CHARACTERISTIC DATA
e
ag
olt
il v
co
le
ab
ow
all
110
100
90
Operating voltage range
80
70
To
Must
ltage
te vo
opera
140
130
120
80
70
o
Must
50
40
be
30
20
0.2
0.4
0.6
(
1.0
0.5
0.1
DC contact rating)


sc
0.3
10
0.8
20
30
on
50
0.4
60
40
50
12 V DC
resistive load
10
5
0
0
10
20
30
40
50
60
70
80
Nominal voltage multiplying factor (%)
28 V DC
resistive load
120 V AC
resistive load
0
0.5
1.0
1.5
2.0
Contact load current (A)
FBR211
n = 100
ed
40
20
20
0
0.8
Life curve
20
10
0.6
Coil power (W)
nu
60
Distribution (%)
30
e
Distribution of contact resistance
80
FBR211
n = 100
Operate
Release
80
40
ti
Distribution of operate and release time
100
Operate
Release
tim
100
1
120
Contact load current (A)
Distribution (%)
Distribution (%)
50
0.2
(x104)
200
(○ AC contact rating)
Di
Distribution of operate and release voltage
te
2
0
DC resistive load
n REFERENCE DATA
FBR211
n = 100
era
1
ge
AC resistive load
Coil power (W)
60
volta
Maximum switching capacity
Contact load current (A)
Coil temperature rise (°C)
60

Op
3
Operating temperature (°C)
Standard
(0.45 W type)
High sensitive
(0.2 W type)

perate
–10 0 10 20 30 40 50 60 70 80
Coil temperature rise data
(at 20°C)
Not including bounce time
4
Release time
Operating temperature (°C)
70
(Data) assumes that
the maximum allowable temperature
of E type insulation coil is
115°C
Operating voltage range
110
100
90
–10 0 10 20 30 40 50 60 70 80
Operate and release time data
5
Time (msec)
um
xim
Ma
140
130
120
160
150
Nominal voltage multiplying factor (%)
(Data) assumes that
the maximum allowable temperature
of E type insulation coil is 115°C
160
150
Range of operation temperature and voltage
(high sensitive 0.2 W type)
ge
volta
coil
able
llow
ma
imu
Max
Nominal voltage multiplying factor (%)
Range of operation temperature and voltage
(Standard 0.45 W type)
Service life (operations)
n
0
0
1
2
3
4
5
Time (ms)
6
7
8
0
10
20
30
40
50
60
70
80
Contact resistance (mΩ)
FBR211 SERIES
n DIMENSIONS
1. STANDARD (Flux free type)
Dimensions
Schematics (BOTTOM VIEW)
(A type or C type)
15.1
+0.5
To
0.3
7.62
(1.24)
3.2
10.5+0.5
10.1
+0.5
0.6
0.35
(1.2)
10.16
0.3
0.6
7.62
(2.04)
(1.9)
Di
10.16
sc
2.54
7.62
2.54
1
5 6
12
8
7
12
8 7
(B type or E type)
1
5
6
1
5 6
12
8
7
12
8 7
on
PC board mounting hole layout (BOTTOM VIEW)
10.16
6
(A type or C type)
16.5
3. PC BOARD MOUNTING HOLE LAYOUT
6–ø1.0
5
Schematics (BOTTOM VIEW)
+0.5
3.2
be
10.7+0.5
11.7
1
2.54
2. N-TYPE (Plastic sealed type)
Dimensions
+0.5
(B type or E type)
ti
nu
ed
Unit: mm
FBR211 SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
l
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
To
be
Di
sc
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
on
ti
nu
ed
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
FBR211 SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
To
be
Di
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
sc
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. June 30, 2009.
on
ti
nu
ed
Similar pages