Renesas M627X5 Voltage detecting, system resetting ic sery Datasheet

M6270X, M6271X,
M6272X, M6273X, M6274XML/SL
Voltage Detecting, System Resetting IC Series
REJ03D0525–0200
Rev.2.00
Nov 03, 2005
Description
The M627XXML/SL is a voltage threshold detector designed for detection of a supply voltage and generation of a
system reset pulse for almost all logic circuits such as microprocessor.
It also has extensive applications including battery checking, level detecting and waveform shaping circuits.
Features
• Detecting voltage
• Hysterisis voltage
• Delay time
M627X2, M627X3:
2.87V
M627X4, M627X5:
2.58V
M627X6, M627X7:
2.39V
M627X8, M627X9:
1.72V
80mV
M6270X:
0sec
M6271X:
200usec
M6272X:
50msec
M6273X:
100msec
M6274X:
200msec
• Few external parts
• Low threshold operating voltage
(Supply voltage to keep low-state at low supply voltage)
• Wide supply voltage range
1.5V to 7.0V
• Extra small 3-pin package (3-pin FLAT)
• Built-in long delay time
0.65V (Typ.) at RL=22kΩ
Application
•
•
•
•
•
•
Reset pulse generation for almost all logic circuits
Battery checking, level detecting, waveform shaping circuits
Delayed waveform generator
Switching circuit to a back-up power supply
DC/DC converter
Over voltage protection circuit
Recommended Operating Condition
• Supply voltage range 1.5V to 7.0V
Rev.2.00 Nov 03, 2005 page 1 of 6
M6270X, M6271X, M6272X, M6273X, M6274XML/SL
Pin Arrangement
(TOP VIEW) ex. M62724
3
OUTPUT
2
GND
1
SUPPLY
VOLTAGE
M62724ML
Outline SOT–89
(1) SUPPLY
VOLTAGE
(2) GND
(3) OUTPUT
(1) (2) (3)
M62724SL
Outline TO–92L
Block Diagram
M6270XML/SL
(Built In Load: M62702,4,6,8)
SUPPLY VOLTAGE (Open Collector: M62703,5,7,9)
SUPPLY VOLTAGE
1
1
25uA
Typ
R1
–
25uA
Typ
R1
3 OUTPUT
C
1.25V
2
2
GND
GND
SUPPLY VOLTAGE
1
25uA
Typ
R1
OSC
–
+
R2
M6272X, M6273X, M6274XML/SL
(Built In Load: X = 2,4,6,8)
(Open Collector: X = 3,5,7,9)
3 OUTPUT
"L"RESET TYPE
COUNTER
1.25V
2
GND
Rev.2.00 Nov 03, 2005 page 2 of 6
–
+
R2
1.25V
3 OUTPUT
–
"L"RESET TYPE
+
R2
M6271XML/SL
(Built in Load: M62712,4,6,8)
(Open Collector: M62713,5,7,9)
"L"RESET TYPE
M6270X, M6271X, M6272X, M6273X, M6274XML/SL
Function Diagram
SUPPLY
VOLTAGE
Vs+∆Vs
Vs
0.65V
t
H
OUTPUT
STATE
td
td
L
t
OUTPUT
UNDEFINED
td: delay time
built-in delay circuit type
Output Form
Built-in Load
M627X2
M627X4
M627X6
M627X8
Open Collector
M627X3
M627X5
M627X7
M627X9
Absolute Maximum Ratings
(Ta = 25°C, unless otherwise noted)
Item
Supply voltage
Symbol
VCC
Ratings
7
Unit
V
Output sink current
Output voltage
Power dissipation
Isink
VO
Pd
mA
V
mW
Thermal derating
Kθ
Operating temperature
Storage temperature
Topr
Tstg
6
VCC
700
500
7
5
–30 to +85
–40 to +125
Rev.2.00 Nov 03, 2005 page 3 of 6
mW/°C
°C
°C
Test Conditions
Output with constant current load
3pin SIP
3pin FLAT
Ta ≥ 25°C
3pin SIP
3pin FLAT
M6270X, M6271X, M6272X, M6273X, M6274XML/SL
Electrical Characteristics
(Ta = 25°C, unless otherwise noted)
Item
Detecting voltage
Hysteresis voltage
Detecting voltage
temperature coefficient
Circuit current
Delay time
Symbol
Min
Typ
Max
Unit
VS
2.74
2.46
2.28
1.64
50

2.87
2.58
2.39
1.72
80
0.01
3.00
2.70
2.50
1.80
110

V
100
120
250
225
230
205
200
175
130
105

80
30
60
120

200
220
395
370
375
350
345
320
275
250
3
200
50
100
200
0.2
340
400
560
535
540
515
510
485
440
415

500
70
140
280
0.4


0.7
0.6
–25
∆VS
VS/∆T
ICC
tpd
Output
saturation voltage
Vsat
Threshold
operating voltage
VOPL
Output load current
Output high voltage
Output leak current
IOC
VOH
IOH
Rev.2.00 Nov 03, 2005 page 4 of 6
–40
VCC–0.2


VCC–0.06


Test condition
M627X2, 3
M627X4, 5
M627X6, 7
M627X8, 9
mV
%/°C
µA
No OSC & counter
Built-in
OSC &
counter
X=2,3,4
VCC=3.3V
VCC=3.0V
VCC=2.7V
VCC=2.0V
µs
ms
Response Time
Ta=–30 to +85°C
M6270X
M6271X
M627X2
M627X3
M627X4
M627X5
M627X6
M627X7
M627X8
M627X9
M6270X
M6271X
M6272X
M6273X
M6274X
V
VCC=2V, Isink=4mA,
M627X8,9: VCC=1.6V
0.8
0.7
V
Minimum
RL=2.2kΩ, Vsat≤0.4V
supply voltage
for operation
RL=100kΩ, Vsat≤0.4V
–17

30
1
µA
V
nA
µA
Built-in Load type, VO=1/2*VCC
Built-in Load type
Open
collector type
Ta=–30 to +85°C
M6270X, M6271X, M6272X, M6273X, M6274XML/SL
Example of Application Circuit
Reset Circuit of M627XX Series
Vcc
SUPPLY
VOLTAGE
OUTPUT
M627XX
GND
RL
SUPPLY
VOLTAGE
RESET (RESET)
LOGIC CIRCUIT
GND
Note: 1. The logic circuit preferably should not have a pull-down resistor,
but if one is present, add load resistor RL to overcome the pull-down resistor.
Rev.2.00 Nov 03, 2005 page 5 of 6
M6270X, M6271X, M6272X, M6273X, M6274XML/SL
Package Dimensions
Package Name
SOT-89
JEITA Package Code
SC-62
RENESAS Code
PLZZ0004CB-A
MASS[Typ.]
0.48g
Previous Code

Unit: mm
4.6Max
1.5 ± 0.1
4.2Max
0.8Min
2.5 ± 0.1
1.6 ± 0.2
0.58Max
1.5
3.0
JEITA Package Code

RENESAS Code
PRSS0003DF-A
Package Name
TO-92L
0.48Max
MASS[Typ.]
0.34g
8.2 Max
φ 5.1 Max
2.2 Max
9.5 Min
0.8
0.5
1.27
1.27
0.5
4.1 Max
1.35
4.1
Rev.2.00 Nov 03, 2005 page 6 of 6
+0.03
0.4 –0.05
Unit: mm
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, China
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .5.0
Similar pages