Revised June 2000 NC7ST08 TinyLogic HST 2-Input AND Gate General Description Features The NC7ST08 is a single 2-Input high performance CMOS AND Gate, with TTL-compatible inputs. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation. ESD protection diodes inherently guard both inputs and output with respect to the VCC and GND rails. High gain circuitry offers high noise immunity and reduced sensitivity to input edge rate. The TTL-compatible inputs facilitate TTL to NMOS/CMOS interfacing. Device performance is similar to MM74HCT but with 1/2 the output current drive of HC/HCT. ■ Space saving SOT23 or SC70 5-lead package ■ High Speed: tPD 6 ns (typ), VCC = 5V, CL = 15 pF, TA = 25°C ■ Low Quiescent Power, ICC < 1 µA, VCC = 5.5V ■ Balanced Output Drive; 2 mA IOL, −2 mA IOH ■ TTL-compatible inputs Ordering Code: Order Package Product Code Number Number Top Mark NC7ST08M5 MA05B 8S08 5-Lead SOT23, JEDEC MO-178, 1.6mm NC7ST08M5X MA05B 8S08 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7ST08P5 MAA05A T08 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 250 Units on Tape and Reel NC7ST08P5X MAA05A T08 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel Package Description Logic Symbol Supplied As 250 Units on Tape and Reel Connection Diagram IEEE/IEC (Top View) Pin Descriptions Function Table Pin Names Description A, B Inputs Y Output Y = AB Inputs Output A B L L Y L L H L H L L H H H H = HIGH Logic Level L = LOW Logic Level TinyLogic is a trademark of Fairchild Semiconductor Corporation. © 2000 Fairchild Semiconductor Corporation DS012182 www.fairchildsemi.com NC7ST08 TinyLogic HST 2-Input AND Gate January 1997 NC7ST08 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) −0.5V to +7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) Supply Voltage 4.5V to 5.5V @VIN < −0.5V −20 mA Input Voltage (VIN) 0.0V to VCC @VIN ≥ VCC + 0.5V +20 mA Output Voltage (VOUT) DC Input Voltage (VIN) −0.5V to VCC + 0.5V DC Output Diode Current (IOK) Input Rise and Fall Time (tr, tf) VOUT < −0.5V −20 mA VOUT > VCC + 0.5V +20 mA Output Voltage (VOUT) 0V to VCC −40°C to +85°C Operating Temperature (TA) VCC = 5.0V 0 ns to 500 ns Thermal Resistance (θJA) −0.5V to VCC + 0.5V DC Output Source or Sink Current SOT23-5 300°C/W SC70-5 425°C/W ±12.5 mA (IOUT) DC VCC or Ground Current per ±25 mA Supply Pin (ICC or IGND) −65°C to +150°C Storage Temperature (TSTG) 150°C Junction Temperature (TJ) Lead Temperature (TL); SOT23-5 200 mW Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of circuits outside the databook specifications. SC70-5 150 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. 260°C (Soldering, 10 seconds) Power Dissipation (PD) @+85°C DC Electrical Characteristics Symbol Parameter TA = +25°C VCC (V) Min 2.0 VIH HIGH Level Input Voltage 4.5–5.5 VIL LOW Level Input Voltage 4.5–5.5 VOH HIGH Level Output Voltage Typ TA = 40°C to +85°C Max Min Max 2.0 0.8 4.4 4.5 4.4 4.5 4.18 4.35 4.13 Conditions V 0.8 4.5 Units V IOH = −20 µA V IOH = −2 mA VIN = VIH VOL LOW Level Output Voltage IOL = 20 µA 4.5 0 0.1 0.1 4.5 0.10 0.26 0.33 V IOL = 2 mA VIN = VIL IIN Input Leakage Current 5.5 ±0.1 ±1.0 V ICC Quiescent Supply Current 5.5 1.0 10.0 µA VIN = VCC or GND 0 ≤ VIN ≤ 5.5V ICCT ICC per Input 5.5 2.0 2.9 mA One input VIN = 0.5V or 2.4V, other input VCC or GND www.fairchildsemi.com 2 Symbol tPLH, Parameter Propagation Delay TA = +25°C VCC (V) Min 5.0 tPHL 4.5 5.5 tTLH, Output Transition Time tTHL CIN Input Capacitance CPD Power Dissipation Capacitance TA = 40°C to +85°C Typ Max 4 12 Min Max 6 17 6 16 20 12 27 31 5 14 18 11 26 30 5.0 4 10 4.5 11 25 31 5.5 10 21 26 Open 5.0 10 6 Units Conditions Fig. No. ns CL = 15 pF ns CL = 50 pF ns CL = 15 pF ns CL = 50 pF Figures 1, 3 (Note 3) Figure 2 Figures 1, 3 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; PRR = variable; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7ST08 AC Electrical Characteristics NC7ST08 Tape and Reel Specification TAPE FORMAT Package Designator Tape Number Cavity Section Cavities Status Status 125 (typ) Empty Sealed Sealed Leader (Start End) M5, P5 Carrier M5X, P5X Cover Tape 250 Filled Trailer (Hub End) 75 (typ) Empty Sealed Leader (Start End) 125 (typ) Empty Sealed 3000 Filled Sealed 75 (typ) Empty Sealed Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM Ko 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) (1.35 ± 0.10) 0.138 ± 0.002 0.055 ± 0.004 (3.5 ± 0.05) 4 (1.4 ± 0.11) DIM P1 DIM W 0.157 0.315 ± 0.004 (4) (8 ± 0.1) 0.157 0.315 ± 0.012 (4) (8 ± 0.3) NC7ST08 Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) 5 www.fairchildsemi.com NC7ST08 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7ST08 TinyLogic HST 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com