OCO-SMBS SMD OCXO Sine wave Features Parameter Applications: GPS, CDMA, 3G, networking, instrumentation SMD packaged precision OCXO High frequency stability vs. temperature Supply voltage: 3.3 V or 5.0 V Specification Frequency range Standard frequencies Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Short term stability Output waveform Output level (rms) Output load Supply voltage Steady-state current consumption @ +25 °C Warm-up time Frequency pulling range Vcontrol (Vc) via external voltage Vcontrol (Vc) via external potentiometer Reference voltage output (Vref) Phase noise @ 10 MHz carrier frequency Operating temperature range Storage temperature range Case height (H) 10.0000 ~ 20.0000 MHz 10.000, 12.800, 13.000, 16.384 & 20.000 MHz ±1 x 10-8 over -40 ~ +70 °C -9 ±5 x 10 over -20 ~ +70 °C ±5 % ±5 x 10-10 ±5 % ±5 x 10-10 1st year ±3 x 10-8 -12 < 5 x 10 Allan deviation per 1 s sine wave > 400 mV 50 5 % +12 V 5 % < 270 mA < 3 min < 1 x 10-7 @ +25 °C -7 > ±0.5 x 10 positive slope 0 ~ +5 V 20 k +5.0 V < -100 dBc/Hz @ 1 Hz < -130 dBc/Hz @ 10 Hz < -145 dBc/Hz @ 100 Hz < -150 dBc/Hz @ 1 kHz < -150 dBc/Hz @ 10 kHz -20 ~ +70 °C or -40 ~ +70 °C -55 ~ +85 °C 12.5 mm or 14.0 mm Pin function #1 #2 #3 #4 #5 #6 #7 Vc Vref Vdc RF output not connected not connected GND Example for IR reflow soldering temperature 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 12 May. 10