7.4 x 3.4 x 1.8 mm SMD CERAMIC RESONATOR AWSZT-MGD Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) FEATURES: • Low resonant impedance • 240°C peak reflow capable • Low cost RoHS Compliant 7.4 x 3.4 x 1.8 mm | | | | | | | | | | | | | | | APPLICATIONS: • Remote controls, Microprocessor clocks, Mobile phones, DVD & CD-Roms, Electric appliances, Industrial controllers • Consumer electronics ELECTRICAL CHARACTERISTICS: Item Frequency Range Resonant Impedance Frequency Tolerance Frequency Stability Withstanding Voltage Rating Voltage (1) D.C.Voltage (2) A.C. Voltage Load Capacitance Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) Requirement 1.84MHz to 8.00MHz See Table 2.1 ± 0.5% ±0.3% max. (-25ºC to +85ºC) 50V (DC , 1 min) 6 V.D.C. max 15 Vp-p. max 30pF ±20% (C1=C2) 100M min. (10V, 1min) -25ºC to +85ºC o o -55 C to +85 C ±0.3% max. (10 years) Table 2.1 Frequency Range (MHz) 1.84 MHz - 2.99 MHz 3.00 MHz - 3.49 MHz 3.50 MHz - 8.00 MHz Resonant Impedance (Ro)(Ω) 100 max 50 max 30 max TEST CONDITION AND TEST CIRCUIT: X: Ceramic Resonator C1=C2=30pF±20% Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure OPTIONS & PART IDENTIFICATION: AWSZT - X.XXMGD Frequency Frequency in MHz ABRACON IS ISO 9001 / QS 9000 CERTIFIED Packaging T for Tape and Reel Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.23.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 7.4 x 3.4 x 1.8 mm SMD CERAMIC RESONATOR AWSZT-MGD Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) RoHS 7.4 x 3.4 x 1.8 mm Compliant | | | | | | | | | | | | | | | OUTLINE DRAWING: RECOMMENDED LAND PATTERN 1.2±0.3 1.2±0.3 1.8±0.3 4.0±0.3 5.0±0.3 5.0±0.3 7.4±0.3 3.4±0.3 1.7±0.3 4.00M INPUT OUTPUT Dimension: mm TAPE & REEL: (4,000pcs/reel) Blank Pocket 10 Pitches Loaded Pocket Top Tape Leader 200mm Max Blank Pocket 10 Pitches - 70g trength 20 Peeling S 10 max A 330±3 B W T 80min 16.4min 22.4max Pieces per reel Carrier tape size 4000typ. 16 Carrier Tape Dimension: mm CAUTION • Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. • This component is not hermetically sealed. Do not clean or wash the component. • Reflow Soldering: Do not use strong acidity flux，such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. • Do not expose the component to open flame. • This specification applies to the functionality of the component as a single unit. The customer is advised to insure that the component is thoroughly evaluated in the application circuit. • Shelf Life: The warranted Shelf Life of this product is Six Months after the Delivery Date under the conditions of sealed, unopened, original packaging. • Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that the customer confirm the solderability and characteristics for the product prior to use. • This product is not recommended for use in industrial related Automotive, Medical, Safety, Military, or other high-reliability life dependant applications. Contact Abracon Corporation prior to using this product when in doubt. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.23.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com