PPTC/ISM Series Features Surface Mount Devices Lead free device iSurface Mount packaging for automated rassembly BAgency redognition:UL Applications Almost anywhere there is a low voltage power supply, up to DC15V and a load to be protested, including: Computer mother board,Modem.USB hub PDAs & Charger,Analog & digital line card Digital cameras,Disk drivers, CD-ROMs Dimensions (mm) A 1.0 1.0 1 1 = Part identification 1.5 B 1.2 D C E Product dimensions (mm) Model min max min max min max D min E min ISM010 2.00 2.2 1.2 1.5 0.50 1.0 0.2 0.1 ISM020 2.00 2.2 1.2 1.5 0.45 1.0 0.2 0.1 ISM035 2.00 2.2 1.2 1.5 0.45 1.0 0.2 0.1 ISM050 2.00 2.2 1.2 1.5 0.30 0.6 0.2 0.1 ISM075 2.00 2.2 1.2 1.5 0.40 1.0 0.2 0.1 ISM100 2.00 2.2 1.2 1.5 0.50 1.1 0.2 0.1 ISM110 2.00 2.2 1.2 1.5 0.50 1.2 0.2 0.1 ISM125 2.00 2.2 1.2 1.5 0.50 1.2 0.2 0.1 A B C Physical Characteristcs Material:Leads Tin plated copper,20AWG0.80mm ALL Environmental Specifications Test conditions Resistance change Passive aging ＋85℃,100hts ±8% typical Humidity aging ＋85℃,85%R.H.,100hrs ±8% typical Thermal shock ＋125℃,to-55℃,10times ±12% typical Resistance to solvent MIL-STD-202,Method 215 No change Vibration MIL-STD-202,Method 201 No change Storage conditions:-40℃ to 85℃ REV.2014.05.01 01 | www.spsemi.cn PPTC/ISM Series Electrical characteristics(25℃) Model Ihold Itrip Vmax Imax Pd max (A) (A) (Vdc) (A) (w) ISM010 0.10 0.30 15 100 0.5 0.5 1.5 1.000 6.000 ISM020 0.20 0.50 9 100 0.5 8.0 0.02 0.650 3.500 ISM035 0.35 0.75 6 100 0.5 8.0 0.1 0.250 1.200 ISM050 0.50 1.00 6 100 0.5 8.0 0.1 0.150 0.850 Maximum Time To Trip Current Time (A) (S) Resistance Rmin Rmax (Ω) (Ω) ISM075 0.75 1.50 6 40 0.6 8.0 0.2 0.090 0.385 ISM100 1.00 1.95 6 100 0.6 8.0 0.3 0.060 0.230 ISM110 1.10 2.20 6 100 0.6 8.0 0.3 0.060 0.210 ISM125 1.25 2.50 6 100 1.5 8.0 0.6 0.030 0.140 Hold Current:Maximum current device will not trip in 25℃ still air. Trip current:Minimum current at which the device will always trip in 25℃ still air Maximum operating volatge device can withstand without damage at ratde current(imax). Maximum fault current device can withstand without damage at rated voltage(Vmax). Typical power dissipatde from device when in the tripped state in 25℃ still air. Minimum/Maximum device resistance prior to tripping at 25℃. Maximum resistance of device at 25℃ measured one hour after trippde tripping. Ihold Itrip Vmax Imax Pd Rmin/max R1max *CAUTION Operation beyond the specified rating may result in damage and possible arcing. Model Ihold versus tempetature maximun ambient operating temperature(Tmao)vs.hold current(Ihold) —20℃ 0℃ 25℃ 40℃ 50℃ 60℃ 70℃ 0.12 0.11 0.10 0.08 0.07 0.06 0.05 0.25 0.23 0.20 0.17 0.14 0.12 0.10 0.44 0.39 0.35 0.30 0.27 0.24 0.20 0.62 0.55 0.50 0.40 0.37 0.33 0.29 0.90 0.79 0.75 0.63 0.57 0.53 0.41 1.25 1.15 1.00 0.82 0.74 0.65 0.55 ISM010 ISM020 ISM035 ISM050 ISM075 ISM100 —40℃ 0.14 0.28 0.47 0.68 0.10 1.35 ISM110 1.45 1.35 1.20 1.10 0.92 0.84 0.75 0.65 0.52 ISM125 1.65 1.53 1.36 1.25 1.05 0.95 0.85 0.74 0.59 Thermal Derating Curve Typical Time-To-Trip At 25°C Derating Curves for SMD0805 Series Average Time Current Curves 160 100 0.10A 0.20A 140 0.35A Time In Seconds Percentage of Derated Current 85℃ 0.03 0.07 0.14 0.23 0.34 0.42 120 100 80 60 40 0.50A 10 0.75A 1.00A 1 1.1A 0.1 20 0.01 0 -40 -20 0 20 40 60 80 0.1 1 10 Temperature (°C) Current In Amperes Package Information Reel: ISM010～ISM 050 ISM075 ～ ISM125 REV.2014.05.01 5000pcs/Reel 4000pcs/Reel 02 | www.spsemi.cn