Hirose DF7-1618PCF 3.96 mm pitch miniature connectors for internal power supplies (ul,c-ul and tuv listed) Datasheet

3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
DF7 Series
Complete
Locking
Function
Completely
enclosed
locking system
Full barrier
between adjacent
contacts.
Prevention of
Incorrect Connections
■Features
1. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
2. Increased Contact Retention of Crimped
Contacts and Prevention of Incomplete
Insertion
Separate contact retainer increases the contact
retention, assures and visually confirms the complete
contact insertion.
3. Molded-in Contact Retention Tabs
Handling of terminated contacts during the assembly and
termination is easier and avoids entangling of wires,
since there are no protruding metal tabs.
4. Incorrect Insertion Prevention
Guide post
Connectors are polarized to assure correct mating with
corresponding parts.
5.Solder Crack Prevention
Board Eyelet mounting
Glass reinforced resin is used in the pin header bodies to
prevent solder cracks caused by the heat shrinkage.
6. Prevention of Incorrect Board Placement
Built-in locating posts assure correct connector
placement and orientation on the board.(2-12 pos.)
7. Supports Sealing after Installation.
Sealing compound can be applied to the board installed
connector for distance of 6 mm max. from the mounting
surface (9 mm max. for single position).
8.Cost Effective Tooling
The same crimping tools are used to terminate socket
and pin contacts.
9. Prevention of Short Circuits between
Adjacent Contacts
Each contact is completely surrounded by the insulator
housing, electrically isolating it from adjacent contacts.
One pos. type can also be mounted
to boards that have eyelets.
Continued.
2004.7
1
10. 10 A maximum Current
12. Supports Eyelets
Connector can carry current of 10 A per contact with
#16 AWG conductor.Refer to page 3 for current
ratings for multi-position connectors using other
conductor sizes.
11. Color Variations
1 pos. can be mounted to boards which have eyelets
attached.
■Applications
1 pos. is available in a standard 3 colors: natural,
blue, and red.
Office equipment, power supplies for industrial, medical
and instrumentation applications, variety of consumer
electronic and electrical applications.
Crimp Sockets
●Single row
●Double rows
Retainer
(optional, order separately)
Shown with terminated
and installed contacts.
Refer to page 8, 9 for details.
Shown with terminated
and installed contacts.
Refer to page 12 for details.
Header
In-line plug
●Single row, straight type ●Double rows, straight type
●Panel lock type
Refer to page 4 for details. Refer to page 11 for details.
Shown with
terminated and installed contacts.
Refer to page 6 for details.
Refer to page 10 for details.
●Single row, right angle type ●Double row, right angle type
Refer to page 5 for details. Refer to page 11 for details.
Shown with
terminated and installed contacts.
Refer to page 7 for details.
■Ordering information
●Socket, Header
DF7 - * S - 3.96 C
1
2
3
4
5
1 Series name: DF7, DF7A, DF7E
2 Number of contacts: 1 to 5
3 Connector type
S: Socket
DS: Double-row socket
●Contacts
DF7 - ** SCF
1
6
7
1618: AWG 16 to AWG 18
2022: AWG 20 to AWG 22
2426: AWG 24 to AWG 26
7 Packaging
P: Header
SCF: Socket contacts / Reel
DP: Double-row Header
SC: Socket contacts / Bag
EP: In-line plug
PCF: Plug contacts / Reel
RS/P: Retainer
PC: Plug contacts / Bag
4 Contact pitch: 3.96mm(7.92 mm)
5 Type of housing: header
C: Crimp housing
DSA: Straight header
DS: Right-angle header
Blank: Retainer
2
6 Applicable Conductor
■Product Specifications
Row
1
Current
rating
2
Ratings
No. of contacts AWG16 AWG18 AWG20 AWG22 AWG24 AWG26
2~10
10A
7A
5A
4A
4A
3A
4
10A
9A
7A
6A
4A
3A
6
9A
8A
6A
5A
4A
3A
8
9A
8A
6A
5A
4A
3A
10
8A
7A
5A
4A
4A
3A
12
8A
7A
5A
4A
4A
3A
AC630V
Specificatoin
TÜV
Item
Operating humidity range
20% to 80%
Storage temperature range
-10çto 60ç (Note 2)
Storage humidity range
40% to 70% (Note 2)
UL/C-UL/TÜV
File No.and Recognition No
AC/DC 600V
UL
:E52653
AC/DC 600V(7.92mm pitch)
C-UL
:E52653
AC/DC 300V (3.96mm pitch)
TÜV
:R9750437
UL/C-UL
Voltage
rating
Operating temperature range -35ç to 85ç (Note 1)
Specification
Condition
11. Contact resistance
12. Insulator resistance
13. Withstanding voltage
14. Insertion-Extraction force
(per contact)
15. Durability
(mating/unmating)
Contact resistance(Initial value)
1000 M ohms min.
No flashover or Insulator breakdown
10 m ohms max. 20mV max., 1mA
500 V DC
1500 V AC for 1 minute
0.3N min., 4.5N max.
Measured with a steel pin of 0.64 x 1.2 ± 0.002 mm
30 cycles
Contact resistance of 20 m ohms max.
16. Vibration
No momentary disconnections of 1 µs min.
17. Shock
No electrical discontinuity of 1 µs. min.
18. Humidity
Contact resistance 20 m ohms max.
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, 2
hours
Acceleration of 490 m/s 2 , 11 ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis.
Temperature 40ç ± 2ç, 90% to 95% RH, 96 hours
(-55ç: 30 minutes → 5 to 35ç: 5 minutes → 85ç: 30 minutes → 5
to 35ç: 5 minutes) for 5 cycles
Flow solder temperature 250ç, 10 seconds
Manual soldering: Soldering iron temperature 300ç, 3 seconds
19. Temperature cycle Contact resistance of 20 m ohms max.
10. Resistance to
soldering heat
No deformation of the insulator parts affecting
performance
Note 1: Includes temperature rise caused by the current flow.
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
■Materials
Product
Part
Material
Finish
Remarks
Sockets
Insulator
Polyamide
Polyamide
(Glass reinforced)
High conductivity copper alloy
Polyamide
Polyamide
High conductivity copper alloy
Color: White
Color: Beige (Single row)
Color: Grey (Double row)
Tin-lead plating (Note)
Color: White
Color: Black
Tin plating (Note)
UL94V-0
Headers
In-line plug
Retainer
Crimp contacts
Insulator
Contact
Insulator
Insulator
Contacts
UL94V-0
---------------UL94V-0
UL94V-0
----------------
Note: Hirose Electric's plating incorporates anti-whisking compounds.
3
■ Straight header
1 Pos.
2 to 10 Pos.
Part Number
CL No.
Number of contacts
A
B
DF7- 1P-3.96DSA
CL680-0133-1
1
-------------
-------------
DF7- 2P-3.96DSA
CL680-0036-5
2
10.40
DF7- 3P-3.96DSA
CL680-0037-8
3
14.36
7.92
DF7- 4P-3.96DSA
CL680-0038-0
4
18.32
11.88
DF7- 5P-3.96DSA
CL680-0039-3
5
22.28
15.84
DF7- 6P-3.96DSA
CL680-0040-2
6
26.24
19.80
DF7- 7P-3.96DSA
CL680-0041-5
7
30.20
23.76
DF7- 8P-3.96DSA
CL680-0042-8
8
34.16
27.72
DF7- 9P-3.96DSA
CL680-0043-0
9
38.12
31.68
DF7-10P-3.96DSA
CL680-0044-3
10
42.08
35.64
DF7- 2P-7.92DSA
CL680-0108-4
2
14.36
7.92
DF7- 3P-7.92DSA
CL680-0109-7
3
22.28
15.84
DF7- 4P-7.92DSA
CL680-0110-6
4
30.20
23.76
DF7- 5P-7.92DSA
CL680-0111-9
5
38.12
31.68
Note 1) Bag packaging (100 pieces/bag). Order by number of bags.
Note 2) The 2 pos. type does not have walls on both sides.
Note 3) DF7-2P-7.92DSA plug has #2 contact positions of DF7-3P-3.96DSA without contacts inserted and the number of pos. indication is 2.
(Mating receptacle: DF7#-3S-3-96C)
DF7-3P-7.92DSA plug has #2 and #4 contact positions of DF7-5P-3.96DSA without contacts inserted and the number of pos. indication is 3.
(Mating receptacle: DF7#-5S-3-96C)
DF7-4P-7.92DSA plug has #2, #4 and #6 contact of DF7-7P-3.96DSA without contacts inserted and the number of pos. indication is 4.
(Mating receptacle: DF7#-7S-3-96C)
DF7-5P-7.92DSA plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DSA without contacts inserted and the number of pos. indication is 5.
(Mating receptacle: DF7#-9S-3-96C)
2 to 10 Pos.
7.1
4.55
7
(Note2)
3.5
3.5
3.2
12.9
12.2
2.8
1
4.55
P=3.96
10
9.9
A
B
No. of contacts
indicator (Note3)
7.8
6.44
0.84
Production Lot No.
5.5
1 Pos.
9E26
3.96
M0.64
Cavity No.
3.45
A
B
DF7
0.64
Cavity No.
2.49
Ø1.4
1.7
6
6L09
Production Lot No.
B PCB mounting pattern (Board thickness: 1.6 ± 0.1)
1 Pos.
Eyelet
Ø3.9 MAX
Board
Ø1
.6
Soldering side
Ø5 MAX
+0.1
5.4 _0.3
3.6±0.1
0.8±0.1
Note 5: One pos. type can also be mounted to boards
that have installed eyelets.
8±0.1
+0
0 .1
3.45±0.05
2 to 10 Pos.
.1
+0
0
.1
Ø1
P=3.96±0.05(7.92±0.05)
B±0.1
+0.15
Ø1.6 _0.25 for eyelet
1.4 +0.1
_ 0 mm
4
Without eyelet
2.49±0.05
■ Right angle header
A
18
7
13.5
7
2.8
7.7
P=3.96
M0.64
A
Production Lot No.
Cavity No.
No. of contacts indicator (Note2)
B
1.1
7.8
6L09
10
3.5
1.1
9.5
2.2
10
A
Ø1.4
1.4
C
Part Number
CL No.
Number of contacts
A
B
C
Quantity per tray
DF7- 2P-3.96DS(24)
DF7- 3P-3.96DS(24)
DF7- 4P-3.96DS(24)
DF7- 5P-3.96DS(24)
DF7- 6P-3.96DS(24)
DF7- 7P-3.96DS(24)
DF7- 8P-3.96DS(24)
DF7- 9P-3.96DS(24)
DF7-10P-3.96DS(24)
DF7- 2P-7.92DS(24)
DF7- 3P-7.92DS(24)
DF7- 4P-7.92DS(24)
DF7- 5P-7.92DS(24)
CL680-0081-0-24
CL680-0082-2-24
CL680-0083-5-24
CL680-0084-8-24
CL680-0085-0-24
CL680-0086-3-24
CL680-0087-6-24
CL680-0088-9-24
CL680-0089-1-24
CL680-0124-0-24
CL680-0125-3-24
CL680-0126-6-24
CL680-0127-9-24
2
3
4
5
6
7
8
9
10
2
3
4
5
3.96
7.92
11.88
15.84
19.80
23.76
27.72
31.68
35.64
7.92
15.84
23.76
31.68
10.40
14.36
18.32
22.28
26.24
30.20
34.16
38.12
42.08
14.36
22.28
30.20
38.12
8.40
12.36
16.32
20.28
24.24
28.20
32.16
36.12
40.08
12.36
20.28
28.20
36.12
114
84
66
60
48
42
36
36
30
84
60
42
36
Note 1) Tray packaging. Order by number of quantity in the tray.
Note 2) DF7-2P-7.92DS plug has #2 contact positions of DF7-3P-3.96DS without contacts inserted and the number of pos. indication is 2.
(Mating receptacle: DF7#-3S-3-96C)
DF7-3P-7.92DS plug has #2 and #4 contact positions of DF7-5P-3.96DS without contacts inserted and the number of pos. indication is 3.
(Mating receptacle: DF7#-5S-3-96C)
DF7-4P-7.92DS plug has #2, #4 and #6 contact of DF7-7P-3.96DS without contacts inserted and the number of pos. indication is 4.
(Mating receptacle: DF7#-7S-3-96C)
DF7-5P-7.92DS plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DS without contacts inserted and the number of pos. indication is 5.
(Mating receptacle: DF7#-9S-3-96C)
B PCB mounting pattern (Board thickness: 1.6 ± 0.1)
7.8±0.05
2_Ø
*_
1.6 +0
.1
0
Ø1. +
1 0.1
0
P=3.96±0.05(7.92±0.05)
A±0.1
C±0.05
5
■ In-line plug (Panel lock type)
Shown with terminated
and installed contacts.
1 Pos.
Part Number
CL No.
Number of contacts
A
B
C
DF7- 1EP-3.96C
CL680-0134-4
1
6.44
-------------
13.96
17.40
DF7- 2EP-3.96C
CL680-0018-3
2
10.40
3.96
DF7- 3EP-3.96C
CL680-0019-6
3
14.36
7.92
21.36
25.32
DF7- 4EP-3.96C
CL680-0020-5
4
18.32
11.88
DF7- 5EP-3.96C
CL680-0021-8
5
22.28
15.84
29.28
DF7- 6EP-3.96C
CL680-0022-0
6
26.24
19.80
33.24
DF7- 7EP-3.96C
CL680-0023-3
7
30.20
23.76
37.20
DF7- 8EP-3.96C
CL680-0024-6
8
34.16
27.72
41.16
DF7- 9EP-3.96C
CL680-0025-9
9
38.12
31.68
45.12
DF7-10EP-3.96C
CL680-0026-1
10
42.08
35.64
49.08
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Refer to page 10 for retainer.
Shown with terminated
and installed contacts.
2 to 10 Pos.
1 Pos.
2 to 10 Pos.
3
A
B
12.44
6.44
3
9.9
9.9
7.1
P=3.96
9.5
13.6
No. of contacts
indicator
A 1
25.6
Cavity No.
B
12.75
27
10
Cavity No.
No. of contacts indicator
Contact No.1
indicator
A 1
13.96
C
B Panel Cutout
1 Pos.
2 to 10 Pos.
(11.32+X)+0.1
0
3.5±0.1
3.4+0.1
0
(C-Y)+0.1
0
6
0.96
0.96
1.2
0.48
1.44
0.8
0
1.92
+0.1
0
1.6
7.4
0.88
+0.1
0
Y
1.44
10.2
X
2.0
10±0.2
3.5±0.1
+0.1
0
(A+0.4)+0.1
0
3.4
10.2+0.1
0
6.84+0.1
0
■ In-line Plug
Shown with terminated
and installed contacts.
Shown with terminated
and installed contacts.
1 Pos.
1 Pos.
2 to 10 Pos.
2 to 10 Pos.
6.44
A
B
7.1
9.9
9.9
P=3.96
9.5
No. of contacts
indicator
A 1
25.6
Cavity No.
27
Cavity No.
B
10
No. of contacts indicator
Contact No.1
indicator
A 1
Part Number
CL No.
Number of contacts
A
B
DF7A- 1EP-3.96C
CL680-0135-7
1
6.44
-------------
DF7A- 2EP-3.96C
CL680-0072-9
2
10.40
3.96
DF7A- 3EP-3.96C
CL680-0073-1
3
14.36
7.92
DF7A- 4EP-3.96C
CL680-0074-4
4
18.32
11.88
DF7A- 5EP-3.96C
CL680-0075-7
5
22.28
15.84
DF7A- 6EP-3.96C
CL680-0076-0
6
26.24
19.80
DF7A- 7EP-3.96C
CL680-0077-2
7
30.20
23.76
DF7A- 8EP-3.96C
CL680-0078-5
8
34.16
27.72
DF7A- 9EP-3.96C
CL680-0079-8
9
38.12
31.68
DF7A-10EP-3.96C
CL680-0080-7
10
42.08
35.64
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Refer to page 10 for retainer.
7
■ Crimp Sockets
Shown with terminated
and installed contacts.
Shown with terminated
and installed contacts.
1 Pos.
1 Pos.
2 to 10 Pos.
2 to 10 Pos.
A
5.5
B
17
10
15.5
9
5.9
5.9
P=3.96
1
Contact No.1 indicator
Cavity No.
No. of contacts indicator
A
Cavity No.
1
1
2
3
4
5
6
7
8
9
10
10
B
No. of contacts indicator
Part Number
CL No.
Number of contacts
A
B
DF7- 1S-3.96C
CL680-0132-9
1
5.50
-------------
DF7- 2S-3.96C
CL680-0009-2
2
10.00
3.96
DF7- 3S-3.96C
CL680-0010-1
3
13.96
7.92
DF7- 4S-3.96C
CL680-0011-4
4
17.92
11.88
DF7- 5S-3.96C
CL680-0012-7
5
21.88
15.84
DF7- 6S-3.96C
CL680-0013-0
6
25.84
19.80
DF7- 7S-3.96C
CL680-0014-2
7
29.80
23.76
DF7- 8S-3.96C
CL680-0015-5
8
33.76
27.72
DF7- 9S-3.96C
CL680-0016-8
9
37.72
31.68
DF7-10S-3.96C
CL680-0017-0
10
41.68
35.64
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Refer to page 10 for retainer.
8
■ Low profile Crimp Sockets
Shown with terminated
and installed contacts.
Shown with terminated
and installed contacts.
1 Pos.
1 Pos.
2 to 10 Pos.
2 to 10 Pos.
A
B
5.5
15.5
10
15.5
9
5.9
5.9
P=3.96
1
Cavity No.
A
1
No. of contacts indicator
2
3
4
5
6
7
8
9
10
10
Cavity No.
1
B
No. of contacts indicator
Part Number
CL No.
Number of contacts
A
B
DF7E- 1S-3.96C
CL680-0194-6
1
5.50
-------------
DF7E- 2S-3.96C
CL680-0195-9
2
10.00
3.96
DF7E- 3S-3.96C
CL680-0196-1
3
13.96
7.92
DF7E- 4S-3.96C
CL680-0197-4
4
17.92
11.88
DF7E- 5S-3.96C
CL680-0198-7
5
21.88
15.84
DF7E- 6S-3.96C
CL680-0199-0
6
25.84
19.80
DF7E- 7S-3.96C
CL680-0200-7
7
29.80
23.76
DF7E- 8S-3.96C
CL680-0201-0
8
33.76
27.72
DF7E- 9S-3.96C
CL680-0202-2
9
37.72
31.68
DF7E-10S-3.96C
CL680-0203-5
10
41.68
35.64
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Retainer is optional.
Note3: Refer to Page 14 for crimp contact.
9
■ Retainer
1 Pos.
1 Pos.
2 to 10 Pos.
2 to 10 Pos.
2.45
2.75
A
B
3
P=3.96
6.6
2.2
10.8
9.3
8.8
10.3
2.2
1
No. of contacts indicator
B
Cavity No.
B
10
Cavity No.
6.5
No. of contacts indicator
Part Number
CL No.
Number of contacts
A
B
DF7- 1RS/P-3.96
CL680-0136-0
1
-------------
-------------
DF7- 2RS/P-3.96
CL680-0027-4
2
10.00
3.96
DF7- 3RS/P-3.96
CL680-0028-7
3
13.96
7.92
DF7- 4RS/P-3.96
CL680-0029-0
4
17.92
11.88
DF7- 5RS/P-3.96
CL680-0030-9
5
21.88
15.84
DF7- 6RS/P-3.96
CL680-0031-1
6
25.84
19.80
DF7- 7RS/P-3.96
CL680-0032-4
7
29.80
23.76
DF7- 8RS/P-3.96
CL680-0033-7
8
33.76
27.72
DF7- 9RS/P-3.96
CL680-0034-0
9
37.72
31.68
DF7-10RS/P-3.96
CL680-0035-2
10
41.68
35.64
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Retainer is common to sockets, in-line plug.(Except low profile sockets)
10
■ Double-row Straight Header
A
B
P=3.96
No. of
contacts
indicator
10
Cavity No.
2.8
13.7
6.6
A
1.26
3.5
12.9
Contact No.1
indicator
CL No.
Number of contacts
A
B
Quantity per tray
DF7- 4DP-3.96DSA(24) CL680-0145-0-24
4
10.40
3.96
132
DF7- 6DP-3.96DSA(24) CL680-0146-3-24
6
14.36
7.92
96
DF7- 8DP-3.96DSA(24) CL680-0147-6-24
8
18.32
11.88
72
DF7-10DP-3.96DSA(24) CL680-0148-9-24
10
22.28
15.84
60
DF7-12DP-3.96DSA(24) CL680-0149-1-24
12
26.24
19.80
54
2.22
B PCB mounting pattern
(Board thickness: 1.6±0.1)
B±0.1
P=3.96±0.05
6.6±0.05
1.7
±1.4
3.3±0.05
Part Number
4.55
3.3
M0.64
Ø1
.6
*
-Ø
1.
1 +0
0 .1
Note: Tray packaging. Order by number of trays quantity.
■ Double-row Right angle Header
+0
0 .1
Contact No.1
2.22±0.05
17.1
14.3
6.6
A
B
C
P=3.96
2.2
3.5
No. of
contacts
indicator
Cavity No.
Number of contacts
A
B
C
Quantity per tray
DF7- 4DP-3.96DS(24) CL680-0150-0-24
4
10.40
8.40
3.96
88
DF7- 6DP-3.96DS(24) CL680-0151-3-24
6
14.36 12.36
7.92
64
DF7- 8DP-3.96DS(24) CL680-0152-6-24
8
18.32 16.32 11.88
48
DF7-10DP-3.96DS(24) CL680-0153-9-24
10
22.28 20.28 15.84
40
DF7-12DP-3.96DS(24) CL680-0154-1-24
12
26.24 24.24 19.80
36
A
B PCB mounting pattern
(Board thickness: 1.6±0.1)
B±0.1
C±0.1
3.96±0.05
1
0.
+ 0
Ø2
2-
7.8±0.05
CL No.
Note: Tray packaging. Order by number of trays quantity.
1
0.
+ 0
.1
1
-Ø
*
Contact No.1
3.96±0.05
A
Part Number
M0.64
3.96
21
7.8
12.4
Ø1.8
Contact No.1 indicator
11
■ Double-row Socket
A
B
12.5
6.6
15.2
P=3.96
17
10
(17.2)
Contact No.1
1
9
2
A
10
No. of contacts indicator
Cavity No.
Part Number
CL No.
Number of contacts
A
B
DF7A-4DS-3.96C
CL680-0160-4
4
10.00
3.96
DF7A-6DS-3.96C
CL680-0161-7
6
13.96
7.92
DF7A-8DS-3.96C
CL680-0162-0
8
17.92
11.88
DF7A-10DS-3.96C
CL680-0163-2
10
21.88
15.84
DF7A-12DS-3.96C
CL680-0164-5
12
25.84
19.80
Note: Bag packaging (100 pieces/bag). Order by number of bags.
12
■ Crimp Contact
● Male Contact
0.85
2.52
● Female Contact
2.35
2.4
2.5
0.64
1.3
AWG No.
2.3
21.7
12.6
16
18
AWG No.
1.6
2.3
16
18
0.8
1.6
0.8
2
Ø2
2
2
2
Ø2
P=11
P=11
t=0.25
t=0.25
Part Number
CL No.
Packaging
Quantity
Finish
DF7-1618SCF
DF7-1618SC
DF7-2022SCF
DF7-2022SC
DF7-2426SCF
DF7-2426SC
DF7-1618PCF
DF7-1618PC
DF7-2022PCF
DF7-2022PC
DF7-2426PCF
DF7-2426PC
CL680-0001-0
CL680-0002-3
CL680-0003-6
CL680-0004-9
CL680-0179-2
CL680-0180-1
CL680-0005-1
CL680-0006-4
CL680-0007-7
CL680-0008-0
CL680-0181-4
CL680-0182-7
Reel
Bag
Reel
Bag
Reel
Bag
Reel
Bag
Reel
Bag
Reel
Bag
3,000
100
3,000
100
3,000
100
3,000
100
3,000
100
3,000
100
Tin plating
● Applicable cable (Tin plated annealed copper wire)
Wire size(Stranded wire conductor)
AWG#16(26/0.254mm)
AWG#18(34/0.18mm)
AWG#20(21/0.18mm)
AWG#22(17/0.16mm)
AWG#24(11/0.16mm)
AWG#26(7/0.16mm)
AWG#16(26/0.254mm)
AWG#18(34/0.18mm)
AWG#20(21/0.18mm)
AWG#22(17/0.16mm)
UL style
Jacket diameter
2.1 to 2.5mm
UL1007
1.6 to 1.9mm
1.3 to 1.45mm
2.9 to 3.2mm
UL1015
2.4 to 2.7mm
Note 1: When using other than the recommended wire, contact your nearest Hirose representative.
Note 2: Strip length: 3.0 to 3.8mm.
■ Tools
Type
Press unit
Automatic
Manual
Applicator
Crimp tools
Part Number
CL No.
CM-105
AP105-DF7-1618
AP105-DF7-2022
AP105-DF7-2426
HT104/DF7-1618
HT104/DF7-2022
HT104/DF7-2426
CL901-0005-4
CL901-4554-4
CL901-4553-1
CL901-4587-3
CL550-0268-0
CL550-0269-3
CL550-0293-8
Applicable Contacts
---------------DF7-1618SCF/DF7-1618PCF
DF7-2022SCF/DF7-2022PCF
DF7-2426SCF/DF7-2426PCF
DF7-1618SC/DF7-1618PC
DF7-2022SC/DF7-2022PC
DF7-2426SC/DF7-2426PC
13
■ Crimp Contact
2.35
2.55
2
0.85
1.3
2
Ø2
2
2
2.8
0.5
1.3
12.6
16
18
2
t=0.25
11
Part Number
CL No.
Packaging
DF7E-1618SCF
DF7E-1618SC
DF7E-2022SCF
DF7E-2022SC
CL680-0204-8
CL680-0205-0
CL680-0206-3
CL680-0207-6
Reel
Bag
Reel
Bag
Quantity
3,000
100
3,000
100
Finish
Tin plating
● Applicable cable (Tin plated annealed copper wire)
Wire size (Stranded wire conductor)
UL style
AWG#16 (26/0.254mm)
AWG#18 (34/0.18mm)
AWG#20 (21/0.18mm)
AWG#22 (17/0.16mm)
UL1007
Jacket diameter
2.1mm to 2.5mm
1.6mm to 1.9mm
Note1: When using other than the recommended wire, contact your nearest Hirose representative.
Note2: Strip length: 2.7 to 3.5mm.
■ Tools
Type
Press unit
Automatic
Manual
14
Applicator
Crimp tools
Part Number
CL No.
CM-105
AP105-DF7E-1618
AP105-DF7E-2022
HT104/DF7E-1618
HT104/DF7E-2022
CL901-0005-4
CL901-4598-0
CL901-4599-2
CL550-0291-2
CL550-0292-5
Applicable contacts
---------------DF7E-1618SCF
DF7E-2022SCF
DF7E-1618SC
DF7E-2022SC
B Mating Dimensions
● Socket to Straight Header Connection
11.25
10
DF7-*S-3.96C
DF7_*RS/P_3.96
DF7_*S_3.96C
DF7E_*S_3.96C
2 to 12 pos.
A
18.5
20.0
18.5
B
09.0
08.5
9.0
C
20.3
21.5
----------------
A
C
A
DF7E-*S-3.96C
1 pos. 2 to 12 pos.
DF7_*P_3.96DSA
B
B
DF7_*P_3.96DSA
Note: DF7-1P-3.96DSA can be mounted to boards which have eyelets attached.
● Socket to Right angle Header Connection (Double-row)
● Socket to Straight Header Connection (Double-row)
(17.7)
DF7A_*DS_3.96C
(18.3)
(28.1)
DF7A_*DS_3.96C
20
DF7_*DP_3.96DSA
DF7_*DP_3.96DS
● Socket to Right angle Header Connection
26.6
25.1
DF7E_*S_3.96C
DF7_*S_3.96C
23.6
10.5
11.85
DF7_*P_3.96DS
DF7_*P_3.96DS
DF7_*RS/P_3.96
● Socket to In-line plug (Panel mount type) Connection ● Socket to In-line plug Connection
DF7_*EP_3.96C
D
F
E
G
DF7_*S_3.96C
DF7_*EP_3.96C
DF7_*S_3.96C
DF7_*RS/P_3.96
DF7_*RS/P_3.96
1 pos.
2 to 10 pos.
1 pos.
2 to 10 pos.
D
35.1
37.0
F
35.1
37.0
E
32.1
34.0
G
32.1
34.0
15
B Contact Extraction Procedure
■ Contact extraction tool: Flat-bladed screwdriver, 1.4 mm blade width
■ Use with crimp Contacts: DF7-1618SC(F), DF7-2022SC(F),
DF7-1618PC(F), DF7-2022PC(F)
■ Work Method
Housing Cross-Section
Flat-bladed screwdriver
1. Refer to the drawing No. 1. Insert
correct size screwdriver in the
insulator against the molded-in
lance. Deflect the lance as shown.
Molded-in lance
Pull-out direction
2. Assure that the lance is deflected
to release the contact and pull- out
wire with the terminated contact.
B General Use Precautions
● Make sure that the lock is fully depressed before un-mating the connectors.
● Use correct size of the wires. Do NOT forcefully twist or deform wires, as this may affect the crimped
contact connection.
● When the potting process is to be performed, please take into consideration the surface tension of
the resin when filling.
®
16
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.