www.fairchildsemi.com FMS6418A Triple Video Driver with Selectable HD/SD Video Filters for RGB or YUV Signals Features Description • Three video anti-aliasing or reconstruction filters • YUV/RGB signal support • 2:1 Mux inputs for multiple RGB/YUV inputs • Selectable 8MHz or 30MHz 6th order filters for SD/HD applications • DC coupled input, AC coupled output • All outputs can drive AC coupled 150Ω loads and provide 6dB of gain • 0.6% differential gain with 0.15° differential phase • 36dB/octave roll-off on all channels The FMS6418A offers comprehensive filtering for set top box or DVD applications. This part consists of a triple 6th order filter with selectable 30MHz or 8.0MHz frequencies. Applications The FMS6418A is available in both 16-pin SOIC and 14-pin TSSOP packages. • Cable Set top boxes • Satellite Set top boxes • DVD players • HDTV • Personal Video Recorders (PVR) • Video On Demand (VOD) A 2-to-1 multiplexer is provided on each filter channel. The triple filters are intended for either YUV or RGB signals. All channels accept DC coupled ground-referenced 1V signals. The filters provide 2Vpp signals into AC coupled terminated loads. The low-pass filters are powered by 3.3V and the outputs by 5.0V. Functional Block Diagram INMUX (A/B) Filter Select (HD/SD) RinA (VinA) Rout (Vout) 6dB RinB (VinB) GinA (YinA) Gout (Yout) 6dB GinB (YinB) BinA (UinA) Bout (Uout) 6dB BinB (UinB) REV. 3G June 28, 2004 DATA SHEET FMS6418A Electrical Specifications (TC = 25°C, Vi = 1Vpp; VCCA = 3.3V, VCCO = 5.0V, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω, referenced to 400kHz; unless otherwise noted) Symbol Conditions Min Typ Supply Current1 VCCA no load 35 45 70 mA ICCO Supply Current1 VCCO no load 30 45 60 mA Vi Input Voltage Max Vil Digital Input Low1 FSEL, INMUX 0 0.8 V Vih Digital Input High1 FSEL, INMUX 2.4 VCCO V PSSR PSSR (all channels) ICCA Parameter Reference to ground Max Units 1.3 DC V -40 dB Standard Definition Electrical Specifications (TC = 25°C, Vi = 1Vpp; VCCA = 3.3V, VCCO = 5.0V, FSEL = 0, all inputs DC coupled, all outputs AC coupled with 220µF into 150Ω, referenced to 400kHz; unless otherwise noted) Symbol AVRGBSD Parameter 1 RGB SD Gain 1 f1dBSD -1dB Bandwidth for SD fCSD -3dB Bandwidth for SD Conditions Min Typ Max Units R,G,B channels SD Mode 5.6 6.0 6.4 R,G,B channels 4.5 6.0 MHz 8.2 MHz -55 dB % R,G,B channels 1 -40 dB fSBSD Attenuation: SD (stopband reject) R,G,B channels at f = 27MHz dG Differential Gain R,G,B channels 0.6 dφ Differential Phase R,G,B channels 0.15 ° THD Output Distortion (all channels) VOUT = 1.8Vpp, RGB Out at 1MHz 0.4 % XTALK Crosstalk (channel-to-channel) at 1MHz -70 dB INMUXISO INMUX Isolation at 1MHz -90 dB SNR Signal-to-Noise Ratio R,G,B channels, NTC-7 weighting 4.2MHz lowpass, 100kHz highpass -73 dB tpdSD Prop Delay for SD Delay from input to output at 4.5MHz 70 ns High Definition Electrical Specifications (TC = 25°C, Vi = 1Vpp; VCCA = 3.3V, VCCO = 5.0V, FSEL = 1, all inputs DC coupled, all outputs AC coupled with 220µF into 150Ω, referenced to 400kHz; unless otherwise noted) Symbol AVRGBHD Parameter 1 RGB HD Gain 1 f1dBHD -1dB Bandwidth for HD fCHD -3dB Bandwidth for HD Conditions Min Typ Max Units R,G,B channels HD Mode 5.6 6.0 6.4 R,G,B channels 20 23 MHz 32 MHz -36 dB R,G,B channels 1 R,G,B channels at f = 74.25MHz -30 dB fSBHD Attenuation: HD (stopband reject) XTALKB Crosstalk (channel-to-channel) at 1MHz -70 dB INMUXISO INMUX Isolation at 1MHz -90 dB SNR Signal-to-Noise Ratio R,G,B channels -73 dB tpdHD Prop Delay for HD Delay from input to output at 20MHz 20 ns Notes: 1. 100% tested at 25°C. 2 REV. 3G June 28, 2004 FMS6418A DATA SHEET Absolute Maximum Ratings (beyond which the device may be damaged) Parameter Min Max Units DC Supply Voltage -0.3 6.5 V Analog and Digital I/O -0.3 VCCO +0.3 V 120 mA Output Current Any One Channel (Do Not Exceed) Note Functional operation under any of these conditions is NOT implied. Performance and reliability are guaranteed only if operating conditions are not exceeded. Reliability Information Parameter Min Typ Junction Temperature Storage Temperature Range -65 Lead Temperature (Soldering, 10s) Thermal Resistance (θJA), JEDEC Standard Multi-layer Test Boards, Still Air Max Units +150 °C +150 °C +300 °C 70 °C/W Recommended Operating Conditions Parameter Operating Temperature Range Min Typ 0 Max Units 70 °C VCCO Range 4.75 5.0 5.25 V VCCA Range 3.135 3.3 3.465 V REV. 3G June 28, 2004 3 DATA SHEET FMS6418A Standard Definition Typical Performance Characteristics (TC = 25°C, Vi = 1Vpp; VCCA = 3.3V, VCCO = 5.0V, FSEL = 0, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω, referenced to 400kHz; unless otherwise noted) Group Delay vs. Frequency SD Frequency Response 10 30 20 1 2 -10 -20 -30 Mkr Frequency Ref 400kHz 1 7.32MHz -40 -50 2 3 -60 1 10 Delay (10ns/div) Amplitude (10dB/div) 0 8.86MHz 27MHz Amplitude 6dB -1dB BW -3dB BW -48.8dB 0 -10 -20 -30 -40 -50 3 -60 fSBSD = Amplitude(ref) – Amplitude(3) = 54.8dB -70 1 = 8.2MHz (25.356ns) -70 400kHz 5 10 15 20 25 30 400kHz 5 10 Frequency (MHz) 20 25 30 Differential Gain Noise vs. Frequency 1.0 -40 Differential Gain (%) -50 Noise (dB) 15 Frequency (MHz) -60 -70 -80 NTSC 0.5 0 -0.5 Min = 0.0 Max = 0.58 ppMax = 0.58 -90 -1.0 -100 0 1.0 2.0 3.0 4.0 5.0 1st 2nd 3rd 4th 5th 6th Frequency (MHz) Differential Phase Differential Phase (deg) 1.0 NTSC 0.5 0 -0.5 Min = -0.06 Max = 0.10 ppMax = 0.16 -1.0 1st 4 2nd 3rd 4th 5th 6th REV. 3G June 28, 2004 FMS6418A DATA SHEET High Definition Typical Performance Characteristics (TC = 25°C, Vi = 1Vpp; VCCA = 3.3V, VCCO = 5.0V, FSEL = 1, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω, referenced to 400kHz; unless otherwise noted) HD Frequency Response Group Delay vs. Frequency 15 10 1 10 2 -10 Delay (5ns/div) Amplitude (10dB/div) 1 = 32MHz (5.957ns) 0 -20 Mkr Frequency Ref 400kHz -30 -40 -50 Amplitude 6dB 1 23.8MHz -1dB BW 2 32.27MHz -3dB BW 3 74.25MHz -31.14dB 3 5 1 0 -5 -10 fSBHD = Amplitude(ref) – Amplitude(3) = 37.14dB -60 -15 400kHz 10 20 30 40 50 60 70 80 90 Frequency (MHz) 400kHz 10 20 30 40 50 60 70 80 Frequency (MHz) Noise vs. Frequency -40 Noise (dB) -50 -60 -70 -80 -90 -100 0 1.0 2.0 3.0 4.0 5.0 Frequency (MHz) REV. 3G June 28, 2004 5 DATA SHEET General Description The FMS6418A offers comprehensive filtering for set top box or DVD applications. This part consists of a triple 6th order filter with selectable 30MHz to 8.0MHz frequencies. A 2-to-1 multiplexer is provided on each filter. The filters are intended for either YUV or RGB signals. All channels accept DC coupled ground-referenced 1V signals. The filters provide 2Vpp signals into AC coupled terminated loads. All channels provide 6dB gain, accept 1V ground referenced inputs, and drive AC coupled loads. The RGB low-pass filters are powered by 3.3V and the output buffers are powered by 5.0V. FMS6418A Pin Configurations INMUX 1 16 FSEL RINA 2 15 VSSA RINB 3 GINA 4 13 ROUT GINB 5 12 GOUT BINA 6 11 BOUT BINB 7 10 VCCO NC 8 9 INMUX 1 14 FSEL RINA 2 13 VSS RINB 3 GINA 4 11 GOUT Applications GINB 5 10 BOUT DC Levels BINA 6 9 VCCO At any given time, the input signal’s DC levels must be between 0.0V and 1.3V to utilize the optimal headroom and to avoid clipping on the outputs. BINB 7 8 VCCA The FMS6418A is a next generation filter solution from Fairchild Semiconductor addressing the expanding filtering needs for set top boxes, and DVD players. The product provides selectable filtering with cutoff frequencies of 30MHz or 8.0MHz on the RGB/YUV channels. Thus, the FMS6418A addresses the requirement for a single set top box to be compatible with a variety of resolution standards. Multiplexers on the RGB channels provide further flexibility. For DVD, Set-top Box, and TV applications, the product provides filtering and output drive amplification for three channels of outputs (RGB/YUV). FMS6418AM16 14 16-pin SOIC FMS6418AMTC14 14-pin TSSOP VSSO VCCA 12 ROUT Single Supply +5V Operation For low power consumption, the FMS6418 was designed to operate off of 5V and 3.3V. VCCA can be operated from 5V instead of 3.3V and still meet specifications, except power consumption. When the 3.3V supply is increased to 5V, the typical current consumption increases by 5mA. The net effect is the part dissipates an additional 22 percent of power. Driving the Digital Pins with 3.3V or 5V Logic. Either is allowed as long as the Vih and Vil are adhered to. 6 REV. 3G June 28, 2004 FMS6418A DATA SHEET Typical Application Diagrams TSSOP-14 INMUX (A/B) 1 Filter Select (HD/SD) 14 2 RinA (VinA) 3 DAC 12 MUX 220µF 75Ω Video Cables ROUT (VOUT) 6dB 75Ω 6th Order Filter RinB (VinB) 4 GinA (YinA) 5 11 MUX 220µF 75Ω GOUT (YOUT) 6dB 75Ω 6th Order Filter GinB (YinB) 6 BinA (UinA) 7 10 MUX 220µF 75Ω BOUT (UOUT) 6dB 75Ω 6th Order Filter BinB (UinB) 9 8 13 5V 3.3V 0.1µF 0.01µF 0.1µF 0.01µF SOIC-16 INMUX (A/B) 1 Filter Select (HD/SD) 16 2 RinA (VinA) 3 DAC 13 MUX 220µF 75Ω ROUT (VOUT) 6dB 75Ω 6th Order Filter RinB (VinB) 4 GinA (YinA) 5 12 MUX 220µF 75Ω GOUT (YOUT) 6dB 75Ω 6th Order Filter GinB (YinB) Video Cables 6 BinA (UinA) 7 11 MUX 6dB 10 14 9 5V BOUT (UOUT) 15 3.3V 0.1µF REV. 3G June 28, 2004 75Ω 75Ω 6th Order Filter BinB (UinB) 220µF 0.01µF 0.1µF 0.01µF 7 DATA SHEET FMS6418A Pin Assignments TSSOP-14 SOIC-16 Pin Name Description 1 1 IN MUX Logic input selects between channel <A> or <B> of the RGB inputs. (1): RGB A input, (0): RGB B input 14 16 FSEL Logic Input selects between (0) SD (8.0MHz) and (1) HD (30.0MHz) filters Equivalent Circuit VCC 1 1 16 14 VSSO 2 3 4 5 6 7 2 3 RINA Analog RED video input - Channel A RINB Analog RED video input - Channel B 4 5 6 GINA GINB Analog GREEN video input - Channel A Analog GREEN video input - Channel B BINA BINB Analog BLUE video input - Channel A Analog BLUE video input - Channel B 7 VCC 2 2 3 3 4 4 5 5 6 6 7 7 VSSA N/A NC 8 9 10 8 9 10 11 VCCA VCCO 11 12 GOUT BOUT No Connect (float pin) +3.3V power supply for filters +5V power supply for output buffers Filtered Analog BLUE video output from either BINA or BINB Filtered Analog GREEN video output from either GINA or GINB VCC 11 10 12 11 13 12 12 13 ROUT Filtered Analog RED video output from either RINA or RINB VSSO N/A 14 VSSO N/A 13 15 N/A VSSA VSS Ground for output buffers Ground for filters Ground 11 = TSSOP-14 Pin Numbers 11 = SOIC-16 Pin Numbers 8 REV. 3G June 28, 2004 FMS6418A DATA SHEET Package Dimensions TSSOP-14 6 e –B– 7 N 5 (b) 2X E/2 1.0 DIA TSSOP-14 8 E1 E c c1 1.0 b1 ddd C B A 2X N/2 TIPS 1 2 3 6 SECTION AA e /2 9 1.0 ccc 7 –A– A2 D 8 3 aaa C A –C– b NX A1 (02) (0.20) bbb M C B A R1 –H– R GAGE PLANE 10 A 0.25 (03) A L (L1) 01 SYMBOL A A1 A2 L R R1 b b1 c c1 01 L1 aaa bbb ccc ddd e 02 03 D E1 E e N MIN – 0.05 0.85 0.50 0.09 0.09 0.19 0.19 0.09 0.09 0° 4.90 4.30 NOM – – 0.90 0.60 – – – 0.22 – – – 1.0 REF 0.10 0.10 0.05 0.20 0.65 BSC 12° REF 12° REF 5.00 4.40 6.4 BSC 0.65 BSC 14 MAX 1.10 0.15 0.95 0.75 – – 0.30 0.25 0.20 0.16 8° 5.10 4.50 NOTES: 1 All dimensions are in millimeters (angle in degrees). 2 Dimensioning and tolerancing per ASME Y14.5–1994. 3 Dimensions "D" does not include mold flash, protusions or gate burrs. Mold flash protusions or gate burrs shall not exceed 0.15 per side . 4 Dimension "E1" does not include interlead flash or protusion. Interlead flash or protusion shall not exceed 0.25 per side. 5 Dimension "b" does not include dambar protusion. Allowable dambar protusion shall be 0.08mm total in excess of the "b" dimension at maximum material condition. Dambar connot be located on the lower radius of the foot. Minimum space between protusion and adjacent lead is 0.07mm for 0.5mm pitch packages. 6 Terminal numbers are shown for reference only. 7 Datums – A – and – B – to be determined at datum plane – H – . 8 Dimensions "D" and "E1" to be determined at datum plane – H – . 9 This dimensions applies only to variations with an even number of leads per side. For variation with an odd number of leads per side, the "center" lead must be coincident with the package centerline, Datum A. 10 Cross sections A – A to be determined at 0.10 to 0.25mm from the leadtip. SOIC-16 REV. 3G June 28, 2004 9 FMS6418A DATA SHEET Ordering Information Model Part Number FMS6418A Lead Free Package Container Pack Qty FMS6418AMTC14 14-pin TSSOP Tube 94 FMS6418A FMS6418AMTC14X 14-pin TSSOP Tape & Reel 2,500 FMS6418A FMS6418AM16 16-pin SOIC Tube 45 FMS6418A FMS6418AM16X 16-pin SOIC Tape & Reel 1,000 Temperature range for all parts: 0°C to +70°C. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICES TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to per form when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2004 Fairchild Semiconductor Corporation