1016 SMX‐4 Series 1.6 x 1.2mm Crystal unit RoHS & REACH compliant Smallest crystal Parameters Specification Frequency range Remarks F_nom 24.0MHz ~ 54.0MHz Frequency tolerance F_tol ±10.0ppm ~ ±50.0ppm Frequency stability over operating temperature range F_stb ±10.0ppm ~ ±50.0ppm Table 2 Operating temperature range T_use ‐20°C ~ +70°C, ‐30°C ~ +85°C, ‐40°C ~ +85°C Table 2 Storage temperature T_stg ‐45°C ~ +85°C Load capacitance CL Equivalent series resistance ESR Table 1 Shunt capacitance C0 3.0pF max Drive level DL 100μW max Frequency aging 8.0pF ~ 12.0pF 50μW typical F_age ±2.0ppm at 25°C, 1 Year Moisture sensitivity level MSL 1 (unlimited) Electrostatic discharge ESD Not applicable Insulation resistance IR For ±1.0ppm please enquire At 100V DC 500MΩ min Dimensions (mm) 80Ω 40.0MHz ~ 54.000MHz 60Ω 4 ±20 ±30 2 1 0.40 ±50 ‐20°C ~ 70°C √ √ √ √ √ ‐30°C ~ 85°C √ √ √ √ √ √ √ √ Enquire Enquire 4 0.37 max ±15 3 1.6±0.1 Stability in ppm ±10 ‐40°C ~ 85°C 2 1 Table 2 Frequency Stability vs Temperature Temp. (°C) 0.50 0.55 3 0.65 0.3 0.55 30.0MHz ~ 39.999MHz 1.2±0.1 100Ω 0.3 0.45 Table 1. Frequency range (MHz) vs ESR 24.0MHz ~ 29.999MHz Part number generation CAZ 2700 G K L GO F L ACT Series Code Frequency (MHz) Frequency Tolerance (±ppm) Frequency stability over temperature range (±ppm) Operating Temperature Range (°C) Load capacitance (CL ‐pF) Frequency mode Packaging (Tape & Reel) CAZ 8MHz = 0800 27MHz = 2700 24.576MHz =2457 ±10 = E ±15 = F ±20 = G ±30 = I ±50 = L ±10 = F ±15 = G ±20 = I ±30 = K ±50 = O ‐20 ~ +70 = G ‐30 ~ +85 = L ‐40 ~ +85 = M 8 = GO 9 = JO 10 = KO 11 = MO 12 = OO Fundamental = F Loose = L 3000pcs = D Note: Use the first 4 characters of the frequency in Hz i.e. 27MHz =27000000Hz part code =2700 If the frequency is 100MHz or higher than the first 5 characters are used Note: It is important to suffix the above part number with full frequency required to give a completed part number as illustrated below. Full Example Part Number : CAZ0800GKLGOL‐PF [8.000MHz] , CAZ2700GKLGOL‐PF [27.000MHz] , CAZ2457GKLGOL‐PF [24.576MHz] ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO9001 Registered Specifications subject to change without notification ‐PF Frequency aging RoHS Standard ±2ppm=leave blank RoHS = ‐PF Non standard ±1ppm=1 1016 SMX‐4 Series 1.6 x 1.2mm Crystal unit Solder Reflow Profile ⑨ ⑧ ⑦ ④ ⑥ Temp.( °C) 300 260 ± 5°C 220 ± 10°C 250 0.45 in 10 sec. max 30~40 sec. max 200 180 ± 10°C 150 90~120 sec. max 100 50 0 Time (sec.) Additional information Drawing control: (Internal use only) Commodity code: 854160 00 00 Issue number: N1 Date: 01/2/2017 Internal reference: H2 ACT (A wholly owned Acal BFi Company) +44 (0) 118 978 8878|[email protected]|www.act.co.uk ISO9001 Registered Specifications subject to change without notification